A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

汽车动力总成弯曲振动应力响应及其激励灵敏度分析

本文利用文献（５）建立的汽车动力总成弯曲有限元分析模型，计算分析离合器壳的动应力响应，并考察了动应力关于不平衡质量位置的灵敏度，对计算分析进行了实验验证。     

基于结构疲劳动态可靠性分析的船舶结构概率损伤容限设计

本文根据结构可靠性理论，提出了一种基于结构疲劳动态可靠性分析的损伤容限分析方法，给出结构疲劳裂纹随机扩展过程中疲劳寿命分布和结构疲劳可靠性的表达式。在给定与疲劳寿命有关的各参数条件下求得动态可靠性曲线，从而在结构设计中根据可靠性要求确定或选择设计参数。     

Biologically induced modification of seawater viscosity in the Eastern English Channel during a Phaeocystis globosa spring bloom

To identify the potential relationship between Pheaocystis globosa bloom conditions and seawater properties, a hydrobiological survey was performed in the inshore waters of the Eastern English Channel over the course of the phytoplankton spring bloom. Chlorophyll concentration, auto- and hetero/mixotrophic composition of protists and standing stock, and seawater viscosity were measured weekly from March to June 2004. The decline of the bloom is characterized by a massive foam formation in the turbulent surf zone. Before foam formation, seawater viscosity significantly increased, showing a significant positive correlation with chlorophyll concentration. In contrast, after foam formation this correlation was negative, seawater viscosity kept increasing despite a sharp decrease in chlorophyll concentrations. No significant correlation has been found between seawater viscosity and the composition of the phytoplankton assemblages observed during the survey. However, significant positive correlations have been found between seawater viscosity and both the size and the abundance of P. globosa colonies. From the correlation patterns observed between chlorophyll concentration and seawater viscosity, we suggest that the rheological properties of seawater are mainly driven by extracellular materials associated with colony formation and maintenance rather than by cell composition and standing stock.     

机车车辆动力学研究及发展

机车车辆动力学在最近10年得到迅速发展,考虑车辆—轨道耦合作用的耦合模型得到广泛应用。随着大跨距跨江铁路桥的建设,车和桥的耦合振动会引起接触网的振动,进而影响弓网的耦合振动。因此十分有必要开展接触网—受电弓—机车车辆—线路—桥梁耦合大系统动力学的研究。进行机车车辆动力学性能优化,必须首先确定机车车辆动力学三要素的优先关系,即运行的稳定性—安全性—平稳性,建立以列车为研究对象的模型,同时在模型中考虑机车车辆结构弹性和频变特征悬挂参数以及气流扰动的影响,进而进行灵敏度分析和参数优化。给出考虑频变特性的钢弹簧等效计算方法以及基于循环变量的列车系统动力学建模和计算方法,并验证了计算方法的有效性。     

自适应神经网络用于船舶动力定位系统

船舶动力定位（DP）采用一种控制系统驱动装在船上的侧推器和尾部推进器或者几个全回转的推进器，使船定位在海平面的要求位置上。船受到风、浪及流等海洋环境力的作用时会漂移离开原位置，传统的控制方法是采用PID（比例、积分、微分）反馈控制。顾和李（1994）提出了一种新的基于人工神经网络的控制方法，它具有许多优越性：①一个可随意调节的目标函数以适合不同的需求──定位精度高或节约定位能量后前馈控制并能自适应于不同的环境力变化包括非线性的波浪漂力；本文在目标函数中引入了与速度相关的项，从而提高控制质量。这一方法也可用于自动驾驶船舶沿设定的轨迹航行。计算机模拟结果表明本方法能达到很好的控制效果。     

无刷直流推进电动机动态性能的仿真

建立无刷直流推进电动机的动态仿真数学模型,利用系统矩阵的特征值和特征向量,以及对称性边界条件确定初始状态,对起动等动态过程进行了仿真和分析。仿真结果对于船舶永磁同步推进系统的设计具有重要的指导意义。     

我国高等级公路机械化施工机械配备

高等级公路施工中，机械化程度很高，施工中机械的配备对工程的影响很大．文章结合京津塘高速公路北京段及合肥－南京－级公路安徽段工程实际施工情况，介绍了我国高等级公路施工机械的配备．     

曲线弯梁桥振动理论分析

利用广义坐标法和能量原理推导曲线梁桥的振动控制微分方程,解释曲线梁桥振动理论与直线梁振动理论的异同点,在推导质量矩阵的显式表达式过程中考虑截面扭转中心与截面形心的不一致。随后给出了曲线梁动力分析的有限元方法,并完成了相应电算程序的编制。最后通过实例分析并验证本文所提计算理论和计算方法的正确性。     

铁路数字信号电缆自动测试系统的设计与研究

CTS-RW铁路数字信号电缆自动测试系统是对铁路数字信号电缆的电气性能参数进行自动测试的高精度专用测试设备.介绍了其测试原理、硬件设计及软件设计,并通过与标准件及专用测试仪器的比对实验验证了测试数据的准确性.