面向新型混合交通流的智能交叉口网络布局优化

考虑网联自动驾驶车辆(Connected Autonomous Vehicle, CAV)应用先进的车联网与自动驾驶技术，可以采用智能交叉口的组织形式，大幅提升交叉口的通行效率，为降低CAV与人工驾驶车辆(Human-driven Vehicle, HV)混行条件下城市交通系统的整体出行成本，提出智能交叉口在城 市交通网络中的布局优化问题，建立数学优化模型并求解。首先，基于对两类车辆行驶特性的分析，建立混合用户均衡模型，描述CAV与HV的路径选择行为；其次，从交通规划者的角度，以系统最优为目标，整合混合用户均衡模型，建立面向新型混合交通流的智能交叉口网络布局优化模型，并利用改进的遗传算法求解；最后，选取Sioux-Falls交通网络作为案例分析，验证模型与算法的有效性，并研究CAV渗透率变化对优化结果的影响。研究表明，智能交叉口在城市路网中的合理规划极大地提高了新型混行场景下城市交通系统的出行效率，同时，大幅降低了由于网联自动 驾驶单方面技术优势带来的CAV与HV的出行效率差距，增进了出行公平性。     

桥上CRTSⅡ型板式无砟轨道台后锚固体系端刺结构受力变形特性

通过在高速铁路正线上开展长期温度荷载下的原位监测和列车制动荷载下的实车试验,以及运用ABAQUS有限元软件的数值计算,进行高速铁路桥上CRTSⅡ型板式无砟轨道倒T型和Π型台后锚固体系的端刺结构在温度力和制动力作用下的受力变形特性研究。结果表明:在降温和升温过程中,端刺结构周围土体压应力较大值主要出现在主端刺摩擦板的下部和桥台方向首个小端刺的位置,端刺结构变形主要以顶部弯拉为主,整体纵向变形较小;在紧急制动荷载的作用下,钢轨纵向应力、端刺纵向位移均随着轴重的增加而明显增大,但端刺纵向位移绝对值较小,与温度荷载作用相比,紧急制动荷载作用对端刺结构的影响小。     

国内外铁路货车端墙侧压力标准研究与发展(2)

在铁路货车设计中,确定散粒货物对货车端墙和侧墙的侧压力,一直是颇有争议的关键难题之一。如果对端墙的侧压力值及其分布规律认识不清,可能会将端墙设计载荷取得过小,导致因强度不足而影响到货物运输的安全。研究端墙的散粒货物侧压力值及其分布规律,可明确端墙设计载荷,提高货车运用可靠性,尤其在目前货车朝着重载提速方向发展的过程中具有重要的现实意义。在系统介绍俄罗斯、北美、澳大利亚、日本铁路货车侧压力标准研究的情况和演变发展,并总结各阶段货车侧压力相关技术规范特点的基础上,对比分析我国与国外的现行标准的差异,总结侧压力研究规律与趋势,为我国铁路货车侧压力标准研究与修订提供指导和依据。     

The same mode again? An exploration of mode choice variability in Great Britain using the National Travel Survey

The main focus of travel behaviour research has been explaining differences in behaviour between individuals (interpersonal variability) with less emphasis given to the variability of behaviour within individuals (intrapersonal variability). The subject of this paper is the variability of transport modes used by individuals in their weekly travel. Our review shows that previous studies have not allowed the full use of different modes in weekly travel to be taken into account, have used categorical variables as simple indicators of modal variability and have only considered a limited set of explanatory indicators in seeking to explain modal variability. In our analysis we use National Travel Survey data for Great Britain. We analyse modal variability with continuous measures of modal variability (Herfindahl–Hirschman Index, the difference in mode share between the primary and secondary mode, the total number of modes used). Taking inspiration from Hägerstrand (1970), we conceive that modal variability is determined by different types of spatial mobility constraints and find that reduced modal variability is predicted for having mobility difficulties, being aged over 60, being non-white, working full-time, living in smaller settlement, lower household income, having regular access to a car, having no public transport pass/season ticket and not owning a bicycle. The findings can support a change in perspective in transport policy from encouraging people to replace the use of one mode with another to encouraging people to make a change to their relative use of different transport modes.     

高速铁路轨道的波阻抗及影响因素研究

高速铁路轨道在雷击或故障冲击电流作用下会产生暂态冲击过电压,该过电压的大小由轨道的波阻抗决定。通过建立高速铁路线路的仿真模型,分析直角冲击波在轨道上的传播与折反射过程,提出轨道的波阻抗的计算方法,研究钢轨类型、土壤电阻率、钢轨对地过渡电阻对波阻抗的影响。结果表明:P60型轨道波阻抗数值为235. 55Ω;轨道的波阻抗主要受钢轨类型和土壤电阻率的影响,高速铁路轨道的波阻抗在在210～250Ω变化;在高速铁路轨道仿真模型中,线路末端电阻等于波阻抗时,可以有效地消除折反射对仿真结果的影响,末端电阻的取值不需要考虑钢轨地过渡电阻的影响。研究给出高速铁路轨道波阻抗的范围及仿真模型中末端电阻的取值方法,可以为轨道过电压计算、分析与仿真提供理论与方法参考。     

Optimal joint distance and time toll for cordon-based congestion pricing

This paper addresses the optimal toll design problem for the cordon-based congestion pricing scheme, where both a time-toll and a nonlinear distance-toll (i.e., joint distance and time toll) are levied for each network user’s trip in a pricing cordon. The users’ route choice behaviour is assumed to follow the Logit-based stochastic user equilibrium (SUE). We first propose a link-based convex programming model for the Logit-based SUE problem with a joint distance and time toll pattern. A mathematical program with equilibrium constraints (MPEC) is developed to formulate the optimal joint distance and time toll design problem. The developed MPEC model is equivalently transformed into a semi-infinite programming (SIP) model. A global optimization method named Incremental Constraint Method (ICM) is designed for solving the SIP model. Finally, two numerical examples are used to assess the proposed methodology.     

高压齿轮泵浮动侧板的动态平衡机理

针对高压齿轮泵浮动侧板磨损问题,在解析齿轮泵内部流场的基础上重点研究了浮动侧板反推力作用点变化规律和导致侧板产生倾覆力矩的关键因素。以某型号高压大排量齿轮泵为模型,运用CFD软件解析齿轮泵内部流场并根据侧板结构特点建立压紧力和反推力的求解微分方程,求得一个轮齿啮合周期内的侧板倾覆力矩变化规律,同时通过建立齿轮泵工作腔压力测试系统对该理论分析结果进行验证,额定工况下：试验值与理论值误差为4.18%,当轮齿转角φ=14°时倾覆力矩达到最大值Ms=82.16N?m。该研究为高压大排量齿轮泵浮动侧板倾覆力矩计算和侧板结构优化设计提供了理论基础和技术支撑。     

汽车全塑前端模块结构优化设计

随着塑料材料性能的日益提升,汽车零部件塑料化是汽车轻量化的主要手段之一。文章针对某车型的全塑前端模块结构,根据前端模块的性能指标,利用仿真分析完成前端模块的优化设计,在前端模块性能基本不降低的前提下,整个结构优化实现重量降低10%左右,最终达到降低零件重量和成本的要求。     

An Intelligent Response Surface Methodology for Modeling of Domain Level Constraints

An effective modeling method of domain level constraints in the constraint network for concurrent engineering （CE） was developed. The domain level constraints were analyzed and the framework of modeling of domain level constraints based on simulation and approximate technology was given. An intelligent response surface methodology （IRSM） was proposed, in which artificial intelligence technologies are introduced into the optimization process. The design of crank and connecting rod in the V6 engine as example was given to show the validity of the modeling method.     

一类运输工具带双重能力约束的LRP问题

分析了一类运输工具受双重能力约束的LRP问题，即在物流网络节点最大单批处理能力及运输工具总运输能力双重约束的情况下,如何进行物流中心选址和运输路线安排，使总的费用最小,模型假设网络系统满足如下条件：①节点的最大单批处理能力是逐层变化的，②货物只能用不同运输工具经过某一物流中心进行中转运输．文中建立了混合整数规划模型，提出了一种优化算法，并用优化算法对实例进行求解．