异形变截面多室曲线箱梁桥的试验研究及三维有限元分析

在对某异形变截面多室曲线箱梁桥试验研究的基础上,构造可以综合考虑拉压、弯扭、畸变、剪力滞及其耦合作用的三维虚拟层合单元法,并对该异形桥梁进行空间有限元分析。理论分析和试验研究表明,利用此法对这种复杂的异形桥梁结构进行空间分析,具有模型单元少、计算效率和精度高的特点,完全可以满足实际工程的需要,是一种简单方便的实用计算方法。最后,综合考虑在一期恒载和纵向预应力筋作用下其应力的空间分布情况。研究成果可供工程设计和施工参考。     

轿车与6岁儿童行人不同方位碰撞中下肢损伤分析

Euro NCAP发布的行人模型认证技术公告TB024的最新版本对6岁儿童行人模型认证提出了单独要求,旨在加强对儿童行人的保护.本研究应用符合Euro NCAP技术公告(TB024)规定并且具有详细解剖学结构的6岁儿童行人有限元模型,设置了4组不同方位行人-汽车碰撞仿真试验,以探究不同碰撞方位下的儿童下肢损伤机理.结果...     

行人头部与车辆碰撞中旋转速度对颅脑组织响应影响

为了探究旋转速度在行人头部与车辆碰撞中对颅脑组织响应影响,对46例真实交通事故进行了运动学重建获得行人头部与车辆碰撞线性、旋转速度分布特征,并依此建立了头部与风挡、发动机罩碰撞有限元仿真模型,分析了头部旋转速度在不同线性速度和碰撞位置下对颅脑应力应变响应影响特征.结果表明:在行人头部与风挡碰撞中,当线性速度小于40 k...     

Experimental and finite element analysis of fatigue strength for 300 mm2 copper power conductor

The fatigue strength of a 300 mm² stranded copper conductor was investigated experimentally and by finite element (FE) analysis. An analytical model was also developed and validated. Wires taken from the outer layer of the conductor were fatigue tested in tension–tension loading and compared with similar data for wires taken from a 95 mm² conductor. The wire cross section was deformed due to the compacting process that was applied during fabrication. When corrected for stress concentrations due to the deformation the data for the two sets of wire fell within the same scatter-band. Full scale testing was carried out in a specially designed rig with constant tensile load and reversed displacement controlled bending with a fixed curvature variation. The loading is a simulation of the loading of a power cable hanging from a floating vessel through a bellmouth. Conductors were tested in two states; dry and lubricated. A finite element model was established for the copper conductor. The model was formulated by a combination of elastic beam and beam-contact elements that included the effects of friction. The effect of local bending due to contact forces was included in the model. Two contact conditions were investigated; the point (trellis) contact between adjacent layers of wire and the inline contact within each layer and between the first layer (centre wire) and the second layer. The FE model was validated by a calibration test of a full scale conductor, and by sensitivity studies varying the size and the number of elements of the model. Fatigue analysis of the conductor was carried out, based on the S–N curve for individual wires. Taking into account the effects of friction and local bending, agreement was obtained between predicted and experimental fatigue strength of the conductor, for the FE model as well as the analytical model.     

高尔夫A3型轿车行李箱盖有限元计算与方案优化设计

在对德国大众汽车公司生产的高尔夫A3型轿车行李箱盖的使用材料性能进行实验研究的基础上，建立了三维数学模型，利用I－deas工程软件对其有限元计算，并通过实地结果进行验证，最后提出了高尔A3车行李箱盖的优化方案。     

大开口船波浪载荷长期预报和弯扭强度整船有限元分析

大开口船全船弯扭联合变形与应力的精确计算，必须在整船结构模型上完成。本文以一艘5万吨级大开口船为例，用三维流体动力计算程序进行了波浪随机载荷的长期预报，并在此基础上导出设计波参数组，进而在全船整体结构有限元模型上计算了船体结构在各设计波上的应力分布，并采用嵌入精细舱口角区有限元网络的方法，在整船分析的同时计算出舱口角的应力集中值，获得了船体结构强度的详尽信息。文中阐述了波浪载荷的特点，设计波的确定，浮体完整结构计算的惯性平衡及大开口船的全船计算方法。     

钢-混凝土双面组合连续箱梁负弯矩区有限元分析

钢-混凝土双面组合箱梁是由两个H型钢作钢骨架,并与上下两块混凝土板组合形成的箱形截面,可用于连续梁的负弯矩区。推导得到了负弯矩区截面弹性刚度和塑性极限弯矩的计算公式。建立集中力作用下双面组合连续箱梁负弯矩区的Ansys分析模型,得到了组合梁的荷载挠度曲线、截面应力和应变变化曲线以及钢与混凝土交界面的纵向滑移分布。与双主梁组合梁和普通组合箱梁的受力性能做比较,显示了双面组合箱梁承载能力和变形能力的优越性。     

大型飞机作用下跑道加铺层的结构响应

为了分析机场跑道加铺道面结构在大型飞机多轮荷载作用下的空间响应规律,明确分析模型的合理计算范围和边界条件,应用大型通用有限元软件ABAQUS,建立了沥青混凝土加铺结构三维有限元模型.通过分析B747-400ER和A380-800等大型飞机多种轮载组合方式作用下的道面结构响应规律,以应力收敛为依据,确定了两种大型飞机的最不利荷载组合和分析模型规模:B747-400ER可采用后8轮组作为飞机最不利荷载组合,A380-800可采用3轴双轮6轮组作为飞机最不利荷载组合,道面结构模型平面尺寸应不小于15m×15m.     

Investigation of the effects of sleeper-passing impacts on the high-speed train

The sleeper-passing impact has always been considered negligible in normal conditions, while the experimental data obtained from a High-speed train in a cold weather expressed significant sleeper-passing impacts on the axle box, bogie frame and car body. Therefore, in this study, a vertical coupled vehicle/track dynamic model was developed to investigate the sleeper-passing impacts and its effects on the dynamic performance of the high-speed train. In the model, the dynamic model of vehicle is established with 10 degrees of freedom. The track model is formulated with two rails supported on the discrete supports through the finite element method. The contact forces between the wheel and rail are estimated using the non-linear Hertz contact theory. The parametric studies are conducted to analyse effects of both the vehicle speeds and the discrete support stiffness on the sleeper-passing impacts. The results show that the sleeper-passing impacts become extremely significant with the increased support stiffness of track, especially when the frequencies of sleeper-passing impacts approach to the resonance frequencies of wheel/track system. The damping of primary suspension can effectively lower the magnitude of impacts in the resonance speed ranges, but has little effect on other speed ranges. Finally, a more comprehensively coupled vehicle/track dynamic model integrating with a flexible wheel set is developed to discuss the sleeper-passing-induced flexible vibration of wheel set.     

地铁十字换乘车站预留换乘节点的结构计算分析

十字换乘地铁车站预留换乘节点的结构受力复杂,采用有限元程序建立空间计算模型,分析预留换乘车站节点范围的梁、板、柱内力,找到应力集中部位,为设计提供理论依据,保证车站结构的安全。