引汉济渭工程岭北TBM无扩大洞室刀盘边块更换技术

本文以陕西省引汉济渭工程岭北TBM施工段为依托,为解决TBM在狭小空间内较大部件更换维修困难难题,开展大直径TBM刀盘边块在狭小空间内更换技术研究。通过大量研究,创新性提出新刀盘边块更换方法——基坑法,即通过专用设备配合TBM固有性能,在无扩大洞室工况下完成刀盘边块更换。经岭北TBM刀盘边块更换实例证明,此方法操作简单、适用性高,尤其在狭小空间内更具有优越性,且能节省大量维修时间,有效提高施工工效,可为同类TBM施工提供有益借鉴。     

Costs of air pollutants from shipping: a meta-regression analysis

ABSTRACT

This study estimated the external cost of air pollution from shipping by means of a meta-regression analysis, which has not been made before. Three pollutants, which were included in most of the primary studies, were considered: nitrogen oxides (NO_x), sulphur dioxides (SO₂) and particulate matters with a diameter of max 2.5 micrometres (PM_2.5). All primary studies included damages of health and a majority added impacts on agriculture and estimated the cost of air pollutants by transferring cost estimates from studies on costs of air emissions from transports in Europe. Different regression models and estimators were used and robust results were found of statistically significant emission elasticities of below one, i.e. total external costs increase by less than 1% when emissions increase by 1%. There was a small variation between the pollutants, with the highest elasticity for PM_2.5 and lowest for NO_x. Calculations of the marginal external cost of the pollutants showed the same pattern, with this cost being approximately six times higher for PM_2.5 than for the other pollutants. Common to all pollutants was that the marginal external cost decreases when emission increases. Another robust result was a significant increase in the cost of studies published in journals compared with other publication outlets. These findings point out some caution when transferring constant external unit cost of air pollutant from shipping, which is much applied in the literature, and the cost functions estimated in this study could thus provide a complementary transfer mechanism.     

由两起操作性污染事故引发的关于液货船装卸作业安全的思考

随着我国对石油的需求不断增长,液货船舶数量不断增多,船舶操作性污染事故日益增多。文中试图分析两起发生在天津港的操作性污染事故产生的原因,浅谈目前液货船在装卸作业方面存在的安全问题,从而提出建议和对策,希望能在避免液货船操作性污染事故发生以及减少海洋环境损害方面起到积极的作用。     

港口设备钢丝绳断绳事故分析及预防

对钢丝绳断绳事故进行分析,提出了一些措施,诸如通过钢丝绳的选用、维护、保养、检测等,来延长钢丝绳的使用寿命,杜绝事故的发生。     

空气污染气象与大气环境影响评价和预测研究

通过关于大气污染与气象条件、污染气象要素的测量手段和方法的介绍,以及对区域大气边界层扩散参数、大气扩散数学模式选择等计算方法的分析后,进一步阐明污染物在大气输送、扩散、迁移的稀释过程中,与气候、气象条件有着密切关系,应在大气环境影响评价和预测分析中予以重视。     

浅谈询问调查

询问调查与海事工作关系十分密切,水上交通事故和海事行政处罚案件的调查取证都离不开询问调查,本文从询问前、询问过程和询问后三个方面谈了询问调查的一些方法和技巧。     

MARPOL73/78附则Ⅵ大气污染物排放控制的进展

文章以IMO大气污染通信工作组在2006年底召开的工作会议为背景,介绍了针对船用柴油发动机和燃料控制排放标准的讨论情况。     

机舱油水分离设备的营运检验

船舶舱底水对海洋环境的污染、船舶油水分离器的工作效果直接关系到是否满足MARPOL73/78公约的要求。通过对营运船舶油水分离器的检验方法,保证船舶油水分离器的工作效果。     

建设节约型社会解决三峡库区水污染研究

通过对三峡库区水污染严重性的综述,说明水资源总量控制的重要性和综合防治水污染的紧迫性.对人们自觉的改变用水习惯,增强节水减污意识,保护自然资源,优化生态环境,建设节约型社会,循环经济的实施,保持国民经济的可持续发展有着重要的现实意义.此外,笔者还提出了改善库区水污染的若干建议和具体措施.     

沥青输送管路保温技术与应用

本文论述了沥青输送管路采用保温技术的必要性及采用导热油为热载保温技术的优点对导热 (?)保温筑路结构的关键部位进行了设计。