滚装船冷却水系统的优化设计与热力性能研究

本文以12300t滚装船为母体,运用非线性规划理论对独立式和混合式两套冷却水系统进行了优化计算和分析,并对其冷却水系统的冷却效果和经济性进行了评估.同时还对其多主机双套冷却水系统进行了热力性能研究,对其在系统额定热负荷下和变负荷下的热力特性进行了分析计算,通过计算定量地揭示出其冷却系统的节能潜力.上述分析和研究为今后用以指导冷却系统的运行管理,以及为系统节能降耗提供了科学而准确的依据.     

SBS改性沥青混合料耐海水侵蚀性能研究

通过粘附性、马歇尔稳定度、残留稳定度等试验，讨论了SBS改性沥青耐海水及硫酸盐溶液侵蚀性能。结果表明，在海水和硫酸盐溶液的作用下，SBS改性沥青的水稳定性有一定下降。通过掺加短纤维增强的方法。可以减弱海水及硫酸盐溶液对混合料水稳定性的影响。     

地铁可维护性防水新理念

针对目前地铁防水现状,提出地铁应进行可维护性防水的理念,主要通过采用一系列工艺措施,达到对衬砌背后地下水的控制,使渗漏部位可诊断、易修复,实现对地铁防排水系统的维护,从而使地铁防水可靠、系统维护简易.     

阳宗隧道防排水施工

针对隧道施工中常出现的涌水、泥石流等不良地质现象，结合工程实际，介绍隧道防排水施工及处治措施。     

SBS与沥青的相互作用性分析

为了评价SBS在沥青中的相互作用性质以及提高SBS改性沥青的性能,采用粘度法研究了SBS在不同分散系中的分散性质。通过对所测得的系列数据进行系统分析和比较,发现SBS分子结构中的两个链段在不同性质的溶剂中溶解性质明显不同。在石油馏分组成的混合溶剂中,提高溶剂中芳香烃的数量,可以促进SBS聚苯乙烯段的分散,明显改善SBS的溶解分散性。这一结果在不同系列芳香烃含量的SBS改性沥青性能研究中也得到证实。     

桥面防水粘结材料性能研究

通过对防水粘结材料FYT、高剂量SBS改性沥青、环氧沥青3种材料的室内模拟试验研究,对比了防水粘结材料的剪切强度、拉拔强度和老化性能。本文推荐采用高剂量SBS改性沥青作为高速公路水泥混凝土桥面沥青铺装防水粘结材料。     

Extreme hawser tension assessment for FPSO vessel during offloading operation in Bohai bay

The Floating Production Storage and Offloading Unit (FPSO) is an offshore vessel that produces and stores crude oil prior to tanker transport.Robust prediction of extreme hawser tensions during Floating Production Storage and Offloading (FPSO) operation is an important safety concern. Excessive hawser tension may occur during offloading operations, posing an operational risk. In this paper, AQWA has been used to analyze vessel response due to hydrodynamic wave loads, acting on a specific FPSO vessel under actual sea conditions. Experimental validation of numerical results has been discussed as well.This paper advocates methodology for estimating extreme response statistics, based on simulations (or measurements). The modified ACER (averaged conditional exceedance rate) method is presented in brief detail. Proposed methodology provides an accurate extreme value prediction, utilizing all available data efficiently. In this study the estimated return level values, obtained by ACER method, are compared to the corresponding return level values obtained by Gumbel method. Based on the overall performance of the proposed method, it is concluded that the improved ACER method can provide more robust and accurate prediction of the extreme hawser tension.Data declustering issue has been addressed. Paper highlights ability of ACER method to account for a set of varying sea state probabilities, as required in engineering long term statistical analysis.Described approach may be well used at the vessel design stage, while defining optimal vessel parameters that would minimize potential FPSO hawser tension.     

基于改进型消灭曲线法的横摇阻尼估算

自由衰减试验仍是目前最为有效且常用的估算横摇阻尼系数的方法.横摇阻尼系数的估算精度对于船舶横摇运动的预报起着至关重要的作用.通常采用所谓的消灭曲线法来分析自由横摇衰减数据.该方法的一个不足之处在于其推导是基于忽略了非线性恢复力项的自由横摇运动方程.另一方面,考虑更多非线性成分的能量法能够纳入该因素影响但在实施过程中较为复杂.文中提出了一种改进型的消灭曲线法,能够纳入船体非线性恢复力项的影响.所提出的方法形式简单且相比能量法更易于实施.数值试验证明了改进型消灭曲线法的正确性,并展现了其相对传统消灭曲线法所具有的优势.     

Airport capacity increase via the use of braking profiles

Many airports are encountering the problem of insufficient capacity, which is particularly severe in periods of increased traffic. A large number of elements influence airport capacity, but one of the most important is runway occupancy time. This time depends on many factors, including how the landing roll procedure is performed. The procedure usually does not include the objective to minimize the runway occupancy time. This paper presents an analysis which shows that the way of braking during landing roll has an essential impact on runway throughput and thus on airport capacity. For this purpose, the landing roll simulator (named ACPENSIM) was created. It uses Petri nets and is a convenient tool for dynamic analysis of aircraft movement on the runway with given input parameters and a predetermined runway exit. Simulation experiments allowed to create a set of nominal braking profiles that have different objective functions: minimizing the runway occupancy time, minimizing noise, minimizing tire wear, maximizing passenger comfort and maximizing airport capacity as a whole. The experiments show that there is great potential to increase airport capacity by optimizing the braking procedure. It has been shown that by using the proposed braking profiles it is possible to reduce the runway occupancy time even by 50%.     

State estimation in roll dynamics for commercial vehicles

Accurate lateral load transfer estimation plays an important role in improving the performance of the active rollover prevention system equipped in commercial vehicles. This estimation depends on the accurate prediction of roll angles for both the sprung and the unsprung subsystems. This paper proposes a novel computational method for roll-angle estimation in commercial vehicles employing sensors which are already used in a vehicle dynamic control system without additional expensive measurement units. The estimation strategy integrates two blocks. The first block contains a sliding-mode observer which is responsible for calculating the lateral tyre forces, while in the second block, the Kalman filter estimates the roll angles of the sprung mass and those of axles in the truck. The validation is conducted through MATLAB/TruckSim co-simulation. Based on the comparison between the estimated results and the simulation results from TruckSim, it can be concluded that the proposed estimation method has a promising tracking performance with low computational cost and high convergence speed. This approach enables a low-cost solution for the rollover prevention in commercial vehicles.