基于模糊PID控制的ABS仿真研究

以车轮滑移率为控制对象,分析了模糊控制的理论基础,将传统的模糊控制与经典的PID控制相结合,提出了白适应模糊PID控制算法,并进行了仿真研究.     

整车滑行阻力理论计算方法

通过对预研车型子系统如风阻、重量、轮胎滚阻系数等目标参数进行分析,结合参考车型道路滑行和转鼓滑行的试验数据,利用汽车相关理论原理,提出了三种计算预研车型的理论滑行阻力的方法,用于前期仿真和排放试验摸底。     

车轮防抱死制动滑移模式控制律的理论研究

本文通过建立轮制动时的力学模型，运用现代控制理论中的滑移模式控制方法，对汽车防抱死制动控制律进行了理论分析与研究。     

基于自抗扰的反步非奇异终端滑模船舶航向控制器设计

针对船舶受到不确定干扰的情况下不能准确、快速地跟踪期望航向的问题,设计一种基于自抗扰技术的反步非奇异终端滑模航向控制器,该控制器通过跟踪微分器对期望航向及其微分进行精确提取,通过线性扩张状态观测器实时估计并补偿系统内部和外部的总扰动,引入一阶低通滤波器,有效避免传统反步法中出现的"微分膨胀"问题,利用反步非奇异终端滑模控制技术设计控制律,提高系统的响应速度、抗干扰性和控制精度,通过构造Lyapunov函数证明了系统的稳定性。Simulink仿真试验证明,控制器在不同外界条件下均可对期望航向进行准确、快速地跟踪,具有较强的鲁棒性。     

Sliding window method for vehicles moving on a long track

The rail is modelled as a simply supported beam in the vehicle–track coupled dynamics. The beam is formulated by a partial differential equation that is transformed into an ordinary differential equation by the method of mode superposition for numerical calculation. However, the size of the matrix that is formed by the mode-superposition method increases significantly with track length, which limits the calculation efficiency. Some methods have been developed to solve this calculation issue, but they diminish the merits of the vehicle–track coupled dynamics, which would systematically investigate the dynamics of a vehicle and a track from the entire vehicle–track system. A new method is developed to resolve this contradiction. First, a theory based on a sliding window is established to improve the computational stability with respect to the length and the window-movement ratio. Then, two methods, namely finite element method analysis and an analytical solution, are used to verify the accuracy of the new method, which is highly efficient when used in a vertical half-vehicle–track coupled model to calculate the vehicle response when the vehicle moves on a long track. The results of the vehicle response calculated with and without the sliding window show good consistency.     

Dynamic analysis of a pantograph-catenary system using absolute nodal coordinates

The dynamic interaction between the catenary and the pantographs of high-speed trains is a very important factor that affects the stable electric power supply. In order to design a reliable current collection system, a multibody simulation model can provide an efficient and economical method to analyze the dynamic behavior of the catenary and pantograph. In this article, a dynamic analysis method for a pantograph-catenary system for a high-speed train is presented, employing absolute nodal coordinates and rigid body reference coordinates. The highly flexible catenary is modeled using a nonlinear continuous beam element, which is based on an absolute nodal coordinate formulation. The pantograph is modeled as a rigid multibody system. The analysis results are compared with experimental data obtained from a running high-speed train. In addition, using a derived system equation of motion, the calculation method for the dynamic stress in the catenary conductor is presented. This study may have significance in providing an example that a structural and multibody dynamics model can be unified into one numerical system.     

滑移门锁系统解锁力的传递与优化

降低车门开启力是提高用户对汽车第一感知质量的重要因素。文章介绍了一种滑移门门锁系统解锁力的传递过程以及优化方法,对解锁力传递链上的每一环力大小做出理论计算并分析计算过程,为降低解锁力提供了优化方案,实测解锁力结果满足规范以及客户期望。为门锁系统以及车门系统的设计提供了参考.     

基于粒子群算法的粘性土主动土压力计算方法

假定挡土墙后滑动面为库伦平面滑裂面,基于能量法,推导出了适合与砂性土与粘性土的主动土压力计算公式,然后引入粒子群智能优化算法,对最危险滑动面所对应的破裂角在变量范围内进行全局搜索。运用本文方法分别对墙后填土为为砂性土和粘性土的挡土墙土压力进行计算,发现对于砂性土,优化方法得到的破裂角与理论精确解完全一致;对于粘性土,方法计算结果与实测结果相对误差为5.5%。     

基于滑模控制的卡尔曼滤波在列车定位中的研究

为了提高城市轨道交通中轮轴速度传感器与加速度计组合定位的精度,提出一种基于滑模控制的改进卡尔曼滤波算法。对于组合定位来说,由于卡尔曼滤波不能很好地修正加减速过程中的空转打滑误差,考虑到滑模控制器的滑动模态与系统的参数及扰动无关,提出采用基于滑模控制的改进卡尔曼滤波来进一步降低误差。其基本思路是应用指数趋近律滑模变结构来改善里程计算值,然后再进行卡尔曼滤波。并利用仿真软件对上述过程进行验证,仿真结果表明:基于滑模控制的改进卡尔曼滤波算法,能够在一定程度上减小空转打滑误差,进一步提高定位的精度。最后通过与其他卡尔曼滤波改进算法对比,得出基于滑模控制的卡尔曼滤波方法结构更为简单,也能保证一定的精度。     

Building Real-Time Network Intrusion Detection System Based on Parallel Time-Series Mining Techniques

A new real-time model based on parallel time-series mining is proposed to improve the accuracy and efficiency of the network intrusion detection systems. In this model, multidimensional dataset is constructed to describe network events, and sliding window updating algorithm is used to maintain network stream. Moreover, parallel frequent patterns and frequent episodes mining algorithms are applied to implement parallel time-series mining engineer which can intelligently generate rules to distinguish intrusions from normal activities. Analysis and study on the basis of DAWNING 3000 indicate that this parallel time-series mining-based model provides a more accurate and efficient way to building real-time NIDS.