预制综合管廊接头抗剪性能与等效模拟方法

预制管廊接头力学性能及设计方法研究尚属于起步阶段,理论尚不成熟,对接头受力性能的认识尚不清晰。为研究预制管廊接头的抗剪性能及影响因素,基于福建省平潭预制拼装综合管廊工程,以典型的双舱和三舱预制拼装综合管廊结构为例,采用PLAXIS 3D岩土有限元程序建立预制管廊接头精细化三维数值模型,深入分析管廊接头的抗剪性能及影响因素,并提出合理实用的管廊接头等效模拟方法。研究结果表明,不设置剪力键时接头的极限总剪力降低了11.1%,设置剪力键能够明显地改善接头的抗剪性能;接头剪切强度和剪切刚度均与预应力基本呈线性关系;采用等效界面模型可以比较合理地模拟剪力键接头的抗剪力学行为。     

几种常见形式的等效阶梯截面

针对许多平面杆系桥梁分析软件仅提供梯形分块法的截面尺寸输入方式和截面几何特性已知或者有解析表达式的带有曲边的截面不便直接使用梯形分块法的问题，利用桥梁结构平面计算中截面等效的概念．提出了等效算法，构造了节线数不多于6的等效阶梯截面，推导了等效阶梯截面几何要素的一般计算公式．给出了圆形、圆环等几种常用截面形式的不多于6条节线等效阶梯截面尺寸计算的具体而又简捷的公式。     

Fluxes of dissolved inorganic carbon in three estuarine systems of the Cantabrian Sea (north of Spain)

The diffusive and in situ fluxes of dissolved inorganic carbon (DIC) and total alkalinity (TA) have been measured and an estimation has been made of the water–atmosphere fluxes of CO₂ in three estuarine systems of the Cantabrian Sea during the spring of 1998. Each of these systems undergoes a different anthropogenic influence. The diffusive fluxes of dissolved inorganic carbon and total alkalinity obtained present values ranging between 0.54–2.65 and 0.0–2.4 mmol m⁻² day⁻¹, respectively. These ranges are in agreement with those of other coastal systems. The in situ fluxes are high and extremely variable (35–284 mmol TA m⁻² day⁻¹, 43–554 mmol DIC m⁻² day⁻¹ and 22–261 mmol dissolved oxygen (DO) m⁻² day⁻¹), because the systems studied are very heterogeneous. The values of the ratio of the in situ fluxes of TA and DIC show on average that the rate of dissolution of CaCO₃ is 0.37 times that of organic carbon oxidation. Equally, the interval of variation of the relationship between the benthic fluxes of inorganic carbon and oxygen (F_DIC/F_DO) is very wide (0.3–13.9), which demonstrates the different contributions made by the processes of aerobic and anaerobic degradation of the organic matter, as well as by the dissolution–precipitation of CaCO₃. The water–atmosphere fluxes of CO₂ present a clear dependence on the salinity. The brackish water of these systems (salinity<20), where maximum fluxes of 989 mmol m⁻² day⁻¹ have been estimated, act as a source of CO₂ to the atmosphere. The more saline zones of the estuary (salinity>30) act as a sink of CO₂, with fluxes between −5 and −10 mmol m⁻² day⁻¹.     

FRP正弦波形夹心桥面板的等效有限元模型

以FRP正弦波形夹心桥面板作为研究对象,得到等效正交各项异性实心板,通过理论分析和数值对比,证明了方法的可行性;采用该法对一实际的FRP正弦波形夹心板桥进行了模态分析。     

生活小区管道直饮水的工艺及经济分析

分析了生活小区管道直饮水的净水工艺,对工艺流程各单元的原理和作用进行了阐述,并进行了经济分析,和桶装直饮水比较,管道直饮水的价格较低,表明生活小区管道直饮水系统有较大的发展空间。     

Organic carbon budget for the Gulf of Bothnia

We calculated input of organic carbon to the unproductive, brackish water basin of the Gulf of Bothnia from rivers, point sources and the atmosphere. We also calculated the net exchange of organic carbon between the Gulf of Bothnia and the adjacent marine system, the Baltic Proper. We compared the input with sinks for organic carbon; permanent incorporation in sediments and mineralization and subsequent evasion of CO₂ to the atmosphere. The major fluxes were riverine input (1500 Gg C year^− 1), exchange with the Baltic Proper (depending on which of several possible DOC concentration differences between the basins that was used in the calculation, the flux varied between an outflow of 466 and an input of 950 Gg C year^− 1), sediment burial (1100 Gg C year^− 1) and evasion to the atmosphere (3610 Gg C year^− 1). The largest single net flux was the emission of CO₂ to the atmosphere, mainly caused by bacterial mineralization of organic carbon. Input and output did not match in our budget which we ascribe uncertainties in the calculation of the exchange of organic carbon between the Gulf of Bothnia and the Baltic Proper, and the fact that CO₂ emission, which in our calculation represented 1 year (2002) may have been overestimated in comparison with long-term means. We conclude that net heterotrophy of the Gulf of Bothnia was due to input of organic carbon from both the catchment and from the Baltic Proper and that the future degree of net heterotrophy will be sensible to both catchment export of organic carbon and to the ongoing eutrophication of the Baltic Proper.     

实测数据量大小对疲劳强度评估结果影响的研究

提速机车和客车的运用特点是全寿命时间长、运行线路条件相对固定。如何经济、有效地对结构疲劳强度进行评估是很重要的工作。首先介绍了疲劳强度评估的方法;其次,按不同的里程从全程数据中抽取数据并计算等效应力幅;最后通过对比分析,得出实测数据量大小对疲劳强度评估结果的影响程度,提出了经济、有效的采样方案。     

斜交条件下预制拼装地道结构设计研究

以上海S7公路一期工程斜交条件下的下穿地道为例,对纵缝采用凸凹榫接头的预制拼装体系与封闭框架的现浇工艺体系进行结构受力对比,结果发现,设计中通常假定凸凹榫处采用铰接进行模拟存在不合理之处.因此,从方便工程设计的角度出发,提出预制拼装斜交地道结构体系的受力计算模型可考虑利用封闭框架体系的等效计算模型,但需将凸凹榫位置处的内力值适当提高20％～30％.该研究成果已在依托工程成功应用,可以为类似工程提供参考与借鉴.     

电气化铁道牵引网谐波电流放大仿真分析

在电力传输线等效理论基础上,根据牵引供电系统等值电路,对牵引供电系统中的谐波电流放大以及系统的谐波谐振进行了理论推导。采用某电气化铁道典型数据对牵引网中的谐波电流放大现象进行了仿真分析,并利用电磁暂态仿真软件,对上述仿真分析进行了实验验证,结果基本吻合。通过理论推导以及仿真分析得出了牵引网长度、机车位置以及牵引网的不同位置处等因素与牵引网发生谐波电流放大的关系,可以对牵引供电系统的谐波电流放大以及谐波谐振现象研究提供理论依据和参考。     

等应力设计理念在轴箱橡胶弹簧结构改进中的应用

橡胶产品大量使用在减振降噪领域,其使用过程中的疲劳问题是产品设计需重点考虑的问题。文章对在机车车辆上使用的一款橡胶轴箱弹簧的疲劳问题,进行了基于结构分析与实验验证为特征的探讨,并在此基础上,提出了基于等应力设计理念的优化设计。分析与实验结果表明,通过等应力理念设计的产品结构,在确保结构获得等应力的同时,结构的疲劳寿命得到了成倍增加。