计算机模拟在港口营运中的应用

介绍港口营运的计算机模拟。根据作者对计算机模拟在港口营运应用的经验,介绍港口模拟的步骤、港口模拟的应用范围,并给出一算例。     

船舶液力耦合器的人工神经网络的数学建模

从船舶动力装置动态建模与仿真的实际需求，引出了其主要部件之一的液力耦合器数学建模在稳／动态特性研究中的重要性，以及利用其试验曲线(输入特性形式)作为数据源去构建准稳态数学模型的困难之处：寻找一种通用的数学表达形式，以实现①液力耦合器在额定工况及其附近的试验曲线的内插与外廷；②过渡工况液力耦合器数学模型的设计(如液力耦合器接合和脱开过程其滑差从100％向额定滑差值方向的变化)。本文介绍了人工神经网络方法在液力耦合器动态建模中的应用。文章先介绍了其数学建模的思路和要点：①选择人工神经网络算法(包括传递函数)与结构(人工神经网络隐含层数目和神经元个数)；②提高人工神经网络泛化能力的措施；③利用专业知识扩充人工神经网络训练用的数据样本。然后叙述了其数学模型在某船舶动力装置稳态、动态特性计算机仿真研究中的某些有意义的结果：①正常航行(四机双桨)稳态工况时各车令下液力耦合器的滑差；②不同螺旋桨螺距下的液力耦合器接合过程的滑差变化；③怠速→前进五的急加速过程的滑差变化。     

嵌入式计算机系统中的故障注入技术

故障注入技术越来越广泛地运用于嵌入式系统容错能力的确认和验证中.介绍了几种常用的故障注入技术及其相关原理和特点,并且针对嵌入式系统中的几种常用故障注入工具,描述了它们的体系结构及属性.     

计算机联锁系统辅助电源设计

介绍了多输出单端反激开关电源的设计方法,该方法适用于计算机联锁系统辅助电源的设计。分析多输出单端反激电源的工作原理,双闭环控制方式和工作模式;详细阐述了高频变压器的设计方法以及关键元器件和电路参数设计。该方法设计出的电源符合计算机联锁系统辅助电源性能要求,具有很大的实际工程价值。     

微机控制点火系的检修方法

微机控制点火系的种类有3种,然而根据其结构设计不同又可以把点火系统分为6种,其检修方法各有不同,本文重点介绍点火系统的具体检测维修方法。     

基于单目视觉的区域交通智能车辆道路边界检测方法研究

基于单目视觉的道路边界检测由于其在车辆辅助驾驶系统中的重要应用价值成为当前计算机视觉和智能车辆领域最为活跃的研究课题之一。指出图像边缘检测现有算法的不足,采用领域平均法对图像进行平滑处理,根据图像的边缘特征运用Prewitt算子实现边缘增强,以获取精确的边缘信息。使用最大熵算法分割二值化图像进一步减少噪声,从而得到良好的道路特征图像数据。利用道路约束条件,建立视觉系统动态感兴趣区域(DAOI),运用改进的Hough变换最终识别道路边界。试验结果表明:本文所述算法不仅能准确、实时检测出道路板边界,而且能有效地抑制噪声,为区域交通智能车辆的换道和超车提供研究基础。     

水力数值模型在合流污水一期系统中的运用与研究

该文根据水文学、水力学和计算机模拟技术的发展,通过计算机水力模型技术,对上海合流一期排水系统运行进行模拟,提出系统内相关泵站的运行优化方案。然后经过现场实际检验,获得了合理的控制方式,使整个系统更高效、更稳定地运行。     

Wind Generator Stabilization with Doubly-Fed Asynchronous Machine

This paper investigates the function of doubly-fed asynchronous machine(DASM)with emphasis placed on its ability to the stabilization of the power system including wind generators.P(active power)and Q(reactive power)compensation from DASM can be regulated independently through secondary-excitation controlling.Simulation results by power system computer aided design(PSCAD)show that DASM can restore the wind-generator system to a normal operating condition rapidly even following severe transmission-line failures.Comparison studies have also been performed between wind turbine pitch control and proposed method.     

W-SPSA in practice: Approximation of weight matrices and calibration of traffic simulation models

The development and calibration of complex traffic models demands parsimonious techniques, because such models often involve hundreds of thousands of unknown parameters. The Weighted Simultaneous Perturbation Stochastic Approximation (W-SPSA) algorithm has been proven more efficient than its predecessor SPSA (Spall, 1998), particularly in situations where the correlation structure of the variables is not homogeneous. This is crucial in traffic simulation models where effectively some variables (e.g. readings from certain sensors) are strongly correlated, both in time and space, with some other variables (e.g. certain OD flows). In situations with reasonably sized traffic networks, the difference is relevant considering computational constraints. However, W-SPSA relies on determining a proper weight matrix (W) that represents those correlations, and such a process has been so far an open problem, and only heuristic approaches to obtain it have been considered.This paper presents W-SPSA in a formally comprehensive way, where effectively SPSA becomes an instance of W-SPSA, and explores alternative approaches for determining the matrix W. We demonstrate that, relying on a few simplifications that marginally affect the final solution, we can obtain W matrices that considerably outperform SPSA. We analyse the performance of our proposed algorithm in two applications in motorway networks in Singapore and Portugal, using a dynamic traffic assignment model and a microscopic traffic simulator, respectively.