半约束模型试验--一种验证随浪和斜浪中波浪力计算的手段

本文采用半约束模型试验技术，对一条高速船在规则波中随浪和斜浪工况进行了流体动力系列试验，以探讨航运的安全性，验证作用于船体上波浪力的估算方法。对每次试验，以波动方程的形式采用数值估算方法确定环绕船模的波浪运动的时间历程。并用同样的方法从测量数据中提取垂荡和纵摇与模型测量运动，一阶波导纵荡、横荡作用力和首摇力矩。因此合理比较理论计算的波浪力与力矩的时间历程成为可能。这表明SSPA海事动力学的研究所(MDL)模型试验设施可以提供高质量的测量，与所述计算方法结合起来可用来验证理论计算和建立半经验方法。     

汽车动力总成弯曲振动应力响应及其激励灵敏度分析

本文利用文献（５）建立的汽车动力总成弯曲有限元分析模型，计算分析离合器壳的动应力响应，并考察了动应力关于不平衡质量位置的灵敏度，对计算分析进行了实验验证。     

Time-domain coupled dynamic simulation for SFT-mooring-train interaction in waves and earthquakes

In this study, Submerged Floating Tunnel (SFT)-mooring-train coupled dynamics is solved in the time domain to investigate their dynamic and hydro-elastic interactions under wave and earthquake excitations. The SFT is modeled by the rod-FE (finite element) theory, and it is connected to mooring lines through dummy-connection-mass and linear and rotational springs. A 3D rigid-multi-body dynamic model is developed for train dynamics that consists of seven rigid bodies. The tunnel-train interaction is taken into consideration based on the wheel-rail correspondence assumption and the simplified Kalker linear creep theory. The developed computer simulation program is validated through comparisons with commercial programs and published results when possible. In the case of earthquake-induced dynamics of the coupled system, the effects of soil conditions, tunnel length, mooring interval, seismic-wave propagation, and seaquake are investigated. The magnitudes of the SFT downward motions induced by the moving train are small compared with the motions induced by earthquakes. The earthquake causes transient SFT responses especially at their lowest wet natural frequencies while high-frequency motions are induced by seaquake effect. Structural damping and seismic propagation play an important role in dynamic responses. The interaction of the tunnel and moving train is also evaluated for various train speeds in terms of the derailment and offload factors and riding-comfort criterion. For the given SFT and train designs, the offload factor and riding-comfort criterion can slightly exceed their limits at certain earthquake conditions with the speed as high as 70 m/s, which can be adjusted by reducing train speed.     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

声激励位置对简单导管声辐射特性的影响

文章借助NASTRAN软件,研究了单极子和偶极子声激励位置对简单刚性导管声辐射特性的影响。结果表明：（1）声源的径向位置对导管声辐射影响大,而轴向位置影响小,声源越靠近导管壁,辐射声功率峰值越大;（2）对于单极子而言,声源偏离径向中心位置时,声场的对称性取决于声源的频率值;（3）偶极子声源的方向对于导管声辐射特性的影响很大,必须加以考虑。     

一种紧凑的圆波导 TE01模式激励器

提出了一种基于微带结构的K波段圆波导 T E01模式的激励器。该激励器由四个微带贴片单元环形排列组成,通过设计合理的馈电网络实现TE01模式的辐射。运用 HFSS电磁仿真工具分析了该激励器在圆波导中对TE01模式电磁波的激励情况,并设计了一个微波传输损耗测量实验来验证T E01模式激励的有效性。     

DF7型机车的故障励磁控制系统设计

针对DF7型机车车载微机(或者电子恒功率调节器)出现故障时改用故障励磁控制系统的固定励磁电流存在的缺陷,提出改用故障恒功励磁器方案,介绍了故障恒功励磁器原理,给出了水阻试验和正线试车情况,表明故障恒功励磁器可保障机车安全稳定牵引运行。     

考虑弹性支撑边界条件的电动汽车-路面系统机电耦合振动特性分析

轮毂电机驱动电动汽车的簧下质量大导致轮胎动载荷增加,并且电机电磁力和转矩波动对车轮造成电机激励,进一步加剧车轮振动引起垂向振动负效应的问题。鉴于此,考虑电机的电磁激励,建立了电动汽车-路面系统的机电耦合动力学模型,推导了弹性支撑边界条件下路面结构的模态频率和振型表达式,以及路面振动引起的二次激励。计算了简支与弹性支撑边界条件下的路面模态频率,根据频率分布进行了截断阶数选取,并分析了边界条件、电机激励和车速对路面响应的影响。在此基础上,研究了不同行驶速度、路基反应模量及路面不平顺幅值下,激励形式对汽车车身加速度、悬架动挠度和轮胎动载荷的影响。结果表明：路面不平顺幅值越小,弹性支撑对路面响应的影响越大,弹性支撑边界条件下的路面响应较小,电机激励会引起路面响应的增加;弹性支撑边界条件下,路面不平顺幅值和路基反应模量越小,考虑路面不平顺、路面二次激励和电机激励的三重综合激励对电动汽车响应的影响越大,激励形式对轮胎动载荷的影响最大,对车身加速度的影响次之,对悬架动挠度的影响最小;电机激励导致轮胎动载荷增加,对路面破坏和寿命产生的负效应不容忽视。所建电动汽车-路面系统机电耦合模型及研究思路可为电动汽车垂向动力学分析提供参考与理论支持。     

混合励磁同步发电机电压控制原理分析与实现

为解决永磁发电机输出电压不可控的问题,研究了一种新型结构的混合励磁同步发电机.利用有限元方法计算了电机中永磁和电励磁的磁场分布.根据对永磁发电机输出电压的要求,制定了励磁调节系统的控制策略,讨论了调节过程.为验证混合励磁同步发电机的电压调节能力,设计制造了2.5 kW实验样机及励磁调节系统,并进行实验测试.结果表明:空载运行时,混合励磁同步发电机输出电压为永磁与电励磁部分的合成电势;负载运行时,随着负载的增加,通过调节励磁电流的大小改变了气隙磁通,输出电压稳定在135 V.     

船模伴流场修正对螺旋桨激振力预报的影响

介绍Hoekstra船模伴流修正方法、伴流模拟方法及螺旋桨激振力测量的试验过程。以第16届ITTC推荐的Sydney Express桨为研究对象,在上海船舶运输科学研究所空泡实验室用网格方法模拟船舶艉部流场,通过布置在桨模上方相应位置平板上的5个传感器进行了脉动压力测量。比较螺旋桨在船模伴流场和使用Hoekstra法换算得到的实船伴流场中工作时激振力的预报值及桨模空泡形态,并与实桨对比,就伴流场修正对螺旋桨激振力预报的影响作了探讨。