中低速磁悬浮列车空心电抗器设计与研究

介绍中低速磁悬浮列车空心电抗器的研制过程,描述空心电抗器的技术要求,重点分析电抗器的电感计算、机械结构设计、温升及屏蔽板计算。运用了ANSOFT有限元软件对电抗器电磁场进行模拟分析,以达到国际非电离辐射标准要求。     

中低速磁悬浮列车悬浮电磁铁线圈电感计算

采用传统磁路方法和有限元数值计算方法,对中低速磁悬浮列车悬浮电磁铁线圈电感进行了研究,得到悬浮电磁铁电感随着悬浮气隙、电磁铁线圈电流和电磁铁滚动角度变化而动态变化,在悬浮供电电源和悬浮斩波器的设计中应重点考虑.     

出口欧盟双层观光车侧倾稳定性研究

主要阐述影响双层观光车侧倾稳定性的各项因素；对比分析后，提出采用四个高度控制阀的改进方案，最终通过出口认证试验。     

RIGOROUS PROOF FOR CHARACTERISTICS OF PRACTICABLE MAGNETIC POTENTIOMETERS AND THEIR APPLICATION

IntroductionThe magnetic potentiometer or Rogowski coilhas been widely applied for measuring the heavyAC- current and pulsed current[1～ 3 ] . It has variousadvantages among which the following are of vitalimportance:1 The relation between the inducedoutput voltage in secondary winding and the differ-ential of the primary currents is exactly linear;2The output voltage is independent of the positionof the primary circuit;3 The outputvoltage is un-affected by stray fields of the current which …     

并联有源电力滤波器补偿性能的研究

研究了影响桥式整流带阻感型负载的并联型有源电力滤波器补偿性能的因素,从理论上分析指令延时和母线电压以及输出电感对补偿效果影响的具体原因,并通过Matlab软件建立仿真模型,借助仿真波形和THD数据证明了理论分析的正确性,最后根据实际工程需要合理优化了各个参数,并在一台50 KVA三相四线的并联电力有源滤波器样机上验证了该方法的实用性和有效性.     

消磁工作线圈电流对纵向补偿的干扰研究

从现行消磁工作线圈电流对纵向补偿效果产生较大干扰的事实出发,研究其干扰程度。计算得到相关消磁线圈电感,利用法拉第电磁感应定律具体计算了在工作线圈电流首脉冲换向过程中纵向补偿线圈感应电流的大小。进而提出降低干扰的改进方案,通过科学计算及仿真分析检验了方案效果。研究结果表明改进方案可行。     

出口贸易大国转向出口贸易强国的战略性思考

本文主要阐述了我国对外贸易在由出口贸易大国转变为出口贸易强国的过程中,所应进行的调整出口贸易结构方面的战略思考.文中分析了我国对外贸易在国际贸易中的地位、出口商品结构存在的问题,探究了调整出口贸易结构的内容及调整方向.     

On-line detecting of transformer winding deformation based on parameter identification of leakage inductance

Transformers are required to demonstrate the ability to withstand short circuit currents. Over currents caused by short circuit can give rise to windings deformation. In this paper, a novel method is proposed to monitor the state of transformer windings, which is achieved through on-line detecting the leakage inductance of the windings. Specifically, the mathematical model is established for on-line identifying the leakage inductance of the windings by applying least square algorithm （LSA） to the equivalent circuit equations. The effect of measurement and model inaccuracy on the identification error is analyzed, and the corrected model is also given to decrease these adverse effect on the results. Finally, dynamic test is carried out to verify our method. The test results clearly show that our method is very accurate even under the fluctuation of load or power factor. Therefore, our method can be effectively used to on-line detect the windings deformation.     

回转器在工业控制中的应用

回转器在自动控制、仪器仪表、信号变换以及传感器信号采集与处理等电路中实现大时间常数的一种新方法.根据近代电工理论中的回转器原理,利用运算放大器及其电阻、电容器件可以实现模拟电感,给出了理论计算和应用实例.     

汽车灯具出口认证配光性能测试

阐述汽车灯具出口认证试验涉及最多的SAE和ECE标准法规体系中配光性能测试的异同,同时为出口汽车灯具的生产企业提出建议,