柴油机曲轴的三维形状优化

采用序列线性规划算法对16V240ZJ柴油机锻钢曲轴圆角进行了形状优化设计。优化的目标函数是最大应力最小,设计变量是圆角附近设计单元控制节点的坐标。优化结果完全满足曲轴设计与制造工艺的要求。     

旅客列车发车时间域优化研究

在大量问卷调查的基础上,根据旅客对不同到发时间域选择的偏好,确定了各发车时间域旅客出行的方便系数。利用目标规划原理,以旅客出行方便程度最大为目标,构造了三级控制策略。在考虑客运站到发线能力,以及旅客列车必须在合理的时间域发车等约束条件下,建立旅客列车发车时间域的目标规划模型。利用该目标规划模型,可根据旅客列车实际运行的需要,通过变化控制策略和赋予各目标的优先因子,实现对列车发车时间域的优化。根据模型约束目标正负偏差变量,计算了各级控制策略实现程度系数。最后,以太原站始发旅客列车为实例,利用变换方案对该目标规划模型的运用进行了分析,并将目标规划优化结果和传统确定发车时间域的结果以及指派模型优化结果进行比较分析。     

Magneto-rheological suspensions for improving ground vehicle’s ride comfort,stability, and handling

ABSTRACT

A state-of-the-art discussion on the applications of magneto-rheological (MR) suspensions for improving ride comfort, handling, and stability in ground vehicles is discussed for both road and rail applications. A historical perspective on the discovery and engineering development of MR fluids is presented, followed by some of the common methods for modelling their non-Newtonian behaviour. The common modes of the MR fluids are discussed, along with the application of the fluid in valve mode for ground vehicles’ dampers (or shock absorbers). The applications span across nearly all road vehicles, including automobiles, trains, semi-trucks, motorcycles, and even bicycles. For each type of vehicle, the results of some of the past studies is presented briefly, with reference to the originating study. It is discussed that Past experimental and modelling studies have indicated that MR suspensions provide clear advantages for ground vehicles that far surpasses the performance of passive suspension. For rail vehicles, the primary advantage is in terms of increasing the speed at which the onset of hunting occurs, whereas for road vehicles – mainly automobiles – the performance improvements are in terms of a better balance between vehicle ride, handling, and stability. To further elaborate on this point, a single-suspension model is used to develop an index-based approach for studying the compromise that is offered by vehicle suspensions, using the H₂ optimisation approach. Evaluating three indices based on the sprung-mass acceleration, suspension rattlespace, and tyre deflection, it is clearly demonstrated that MR suspensions significantly improve road vehicle’s ride comfort, stability, and handling in comparison with passive suspensions. For rail vehicles, the simulation results indicate that using MR suspensions with an on-off switching control can increase the speed at which the on-set of hunting occurs by as much as 50% to more than 300%.     

道路安全评价因子分析法

探讨了用因子分析法中公因子作为评价指标的替代指标,用其得分值作为新指标的数值.根据公因子对原始评价信息解释大小来计算新指标权重.然后,用线性加权法对评价对象的安全水平进行客观评价,最后,对此方法进行了比较应用研究,发现评价结论与其它方法有差别.     

汽车关门声品质主客观维度解构及应用研究

通过对关门声品质主观评价维度进行解构,将关门声的主观感知细分为总体响度、厚重感、紧凑感、精致感4个维度,并采用语义细分法结合等级评价法进行关门声品质的主观感知评价。进一步对声品质评价的大量客观参数进行主客观关联性分析,找到了与关门声品质4个感知维度相关性在0.9以上的对应客观量化指标,分别为峰值响度、低频能量、响度特征谱包络和平均尖锐。结合某乘用车关门声品质的优化案例,对提出的主客观评价方法的合理性进行了验证,结果表明,所建立的主客观评价方法,可以全面表达人对关门声品质的主观感知评价,在车门声品质开发过程中能较准确地诊断问题,对汽车关门声品质的评价与开发具有实际指导意义。     

招聘问题的数学模型

对招聘过程中多个定性因素,采用了模糊语言评估,用等级测评法将各类指标模糊量化;运用了多属性决策中的目标规划,引入权重对同一优先级上的不同评价指标进行综合分析,从而解决了不同优先级上各级的择优选择问题;并针对不考虑应聘者志愿和考虑应聘者志愿两种不同情况,分别给出了两种录用分配方案。     

关联模式的新颖性研究

简要介绍了模式的主观兴趣度度量,讨论了模式与用户期望的匹配程度以及模式与领域知识的差异程度,分别从这两个方面定义了模式的新颖性度量。综合考虑领域知识和用户的参与,提出了一种新的新颖性模式评价策略。     

不完备目标信息系统中的可变精度粗糙集模型

文中以同时具有缺席型和遗漏型未知属性值的不完备目标信息系统为研究对象,根据特征关系,研究可变精度粗糙集的模型及其性质．可变精度粗糙集模型与原始的粗糙集模型不同,它是建立在集合多数包含的基础上的,因而该模型是基于特征关系的经典粗糙集模型的推广形式,而基于特征关系的经典粗糙集模型则是可变精度粗糙集模型的一种特殊表现形式．文中对新模型的主要性质作了阐述和证明,结果表明：在不完备目标信息系统中,新模型与原始的粗糙集模型相比具有更高的近似精度,可进行更为精确的度量．     

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

浅谈市政公用工程设计变更的监理

强调了市政公用工程设计变更监理工作的重要性,阐述了施工前、施工中加强事前控制和事中控制的方法,建议加强监理人员职业道德教育,建立完善监理工作各项管理制度,以提高监理效果,确保监理目标的实现。