排序方式: 共有101条查询结果,搜索用时 31 毫秒
1.
2.
3.
4.
Zeyu Ma Xuewu Ji James Yang 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2017,55(3):313-337
Accurate lateral load transfer estimation plays an important role in improving the performance of the active rollover prevention system equipped in commercial vehicles. This estimation depends on the accurate prediction of roll angles for both the sprung and the unsprung subsystems. This paper proposes a novel computational method for roll-angle estimation in commercial vehicles employing sensors which are already used in a vehicle dynamic control system without additional expensive measurement units. The estimation strategy integrates two blocks. The first block contains a sliding-mode observer which is responsible for calculating the lateral tyre forces, while in the second block, the Kalman filter estimates the roll angles of the sprung mass and those of axles in the truck. The validation is conducted through MATLAB/TruckSim co-simulation. Based on the comparison between the estimated results and the simulation results from TruckSim, it can be concluded that the proposed estimation method has a promising tracking performance with low computational cost and high convergence speed. This approach enables a low-cost solution for the rollover prevention in commercial vehicles. 相似文献
5.
未知时变扰动和输入饱和下的智能船舶鲁棒非线性控制 总被引:1,自引:1,他引:0
复杂海况下环境多变并且船舶具有多耦合、强非线性的特点,针对智能船舶定位控制问题,考虑在未知时变扰动和输入饱和约束之下船舶的定位控制问题,结合非线性扰动观测器提出一种带辅助动态系统的鲁棒非线性控制算法。通过Lyapunov理论证明了所提出的非线性扰动观测器与控制器结合后闭环系统的稳定性和信号的一致最终有界性。利用非线性扰动观测器对环境中存在的海浪扰动进行有效的估计处理。最后,通过仿真验证了所提出的控制算法不仅能保证船舶期望的位置和艏向,而且提高了控制速度,具有较好的控制性能。 相似文献
6.
基于扩张观测器的船舶动力定位系统反演滑模变结构控制 总被引:1,自引:0,他引:1
针对海洋平台船舶动力定位控制系统,结合反演滑模控制与扩张观测器的优势,提出一种基于扩张观测器的船舶动力定位反演滑模控制方法.考虑到系统存在未知外部干扰以及船舶模型参数不确定性的问题,将系统分为内环观测器和外环控制器分别设计,首先利用扩张观测器估计系统的未知状态及不确定项,然后在外环的反演滑模控制器中进行补偿,最后用Lyapunov方法证明系统的稳定性.通过船舶定点控制仿真实验表明,基于扩张状态观测器的反演滑模控制器使得船舶纵荡和横荡的位置及首摇角度逐渐保持在期望值,具有较强的鲁棒性和控制性,能够有效抑制传统滑模控制的抖振问题,有益于船舶工程应用. 相似文献
7.
基于自适应观测控制器设计了三相交流感应电机调速系统,该控制器在未知电机转子电阻和负载及不需要测量磁链情况下,可同时且不受限制地单独控制电机转速(转矩)和磁链.控制器只测量转速、电压和电流信号自适应估计磁链和未知参数.用该控制方法设计了两相坐标轴磁场定向电机模型,系统不存在非线性,因此适合离散化和DSP系统的数字实现. 相似文献
8.
针对三相永磁同步电机驱动系统,提出了一种无速度传感器模型预测转矩控制方法.基于模型参考自适应技术设计了观测器,以精确估算转子速度;为了减小转矩和定子磁链波动、提高系统动态和静态响应特性,采用了模型预测控制策略.仿真结果表明所提方法可以使PMSM驱动系统达到满意的控制效果,从而证明论文控制策略的有效性和正确性. 相似文献
9.
Svein Ivar Sagatun Finn Gunnar Nielsen Erling Handal Nils Veland 《Journal of Marine Science and Technology》1999,4(2):68-75
A method for measuring mooring line tension is proposed based on observation of the natural frequencies of the mooring line
segment between the winch and the fairlead. The anchor line tension is observed through the string equation where an analytical
expression for the line's eigen-frequencies is obtained. The tension is observed on line by utilizing a nonparametric system
identification approach in which the peaks of a maximum entropy spectrum of the transverse acceleration measures of the vibrating
string are automatically identified. The method is verified against full-scale data from the Troll B floating concrete oil
production platform operating in the North Sea.
Received for publication on Feb. 24, 1999; accepted on July 26, 1999 相似文献
10.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(5):737-766
The goal of the present study is to show how it is possible to estimate online the individual torques applied at each wheel of an automotive vehicle by using an unknown input observer together with a simple nonlinear state-space model. The necessary measurements are the steering angle, the usual rotation speed of each wheel plus the vertical load at the centre of each wheel. By doing this, this study anticipates the affordability of a new generation of wheel bearing with embedded measurements of transmitted forces. Successful simulated experimentations using a realistic simulator are shown. Validations are done using classical case studies of longitudinal, lateral and coupled dynamics. The present limits and some possible improvements of the proposed method are also discussed. 相似文献