考虑拥堵空间排队与溢出的道路网静态交通流分配

为刻画拥堵空间排队与溢出现象对交通流分配的影响，提出考虑拥堵空间排队与溢出的道路网静态交通流分配问题，并构建相关的求解算法，用于描述交通需求在起讫点移动过程中路网整体的宏观运行状态。首先，丰富和完善考虑拥堵空间排队与溢出的静态交通流分配的相关假设，提出次生瓶颈、拥堵干扰与渗透和分段化路段阻抗等基本概念和理论，来刻画拥堵交通瓶颈、拥堵空间排队等交通现象；其次，建立网络瓶颈识别算法和空间排队回溯算法，基于此构建考虑拥堵空间排队和溢出的增量分配算法，用于求解交通流分配的结果；最后，通过使用一个具有说明型的算例进行对比分析。研究结果表明：建立的瓶颈识别、排队回溯和增量分配算法可以识别路网中的瓶颈位置及其拥堵排队区域，并可计算得到各路段上的分段分配流量；与点排队只影响瓶颈路段的运行状况和均一的路段分配结果相比，可有效描述路网整体的宏观运行状态以及由于拥堵空间排队所导致的拥堵干扰与渗透现象；不同于“时间片”的伪动态交通流分配模型，新建算法的分配结果是“全时段”与“整体性”的路网宏观运行状态，包含了拥堵瓶颈的具体位置和空间排队的干扰与渗透情况；一般拥堵点排队模型和基于“时间片”的拥堵空间排队模型难以刻画拥堵干扰与渗透现象以及路网整体的宏观运行状态，故所建立的分配方法是对传统拥堵交通流分配的丰富和发展。     

钢管桩与混凝土芯粘结力及抗弯应力传递模拟试验研究

依托深圳蛇口集装箱码头二期工程,进行了钢管桩与混凝土芯粘结力及抗弯应力传递模拟试验,对试验结果进行理论分析,讨论了不同搭接长度和不同UEA掺量对钢管桩与混凝土芯单位粘结力的影响;推导出纯弯矩作用下,混凝土芯与钢管粘结段粘结长度的计算公式。为类似工程提供方法指导和理论依据。     

采用喷风冷却工艺提高淬火钢轨性能的研究

钢轨喷风淬火工艺采用单一的冷却介质压缩空气,使淬火冷却均匀性得到提高,而且不受钢轨表面状态对淬火质量的影响,便于生产管理。由于在冷却装置中加入侧面喷风冷却,淬火硬度分布更合理,有利于提高淬火钢轨抗侧磨能力。线路铺设使用也表明,喷风淬火钢轨比喷雾淬火钢轨具有更好的抗剥离性。根据目前国内淬火线生产状况,提出调整钢轨的成分和采用喷风冷却工艺是当前迫切需要解决的问题。     

功率循环测试中衬底焊接层的可靠性

基板与陶瓷衬底之间的焊层寿命通常利用IGBT模块的被动加热和冷却(热循环)来测试,但这种试验会引起焊层失效(分层)。实际应用中,IGBT和二极管芯片是主动被加热的,诸如焊线脱落等其它模式的失效也会限制使用寿命,通常可通过功率循环试验来评估这种应力的影响。本文通过功率循环试验来评估衬底焊层的失效,利用高循环周次的测试进行有效的衬底焊层热循环试验,其关键在于功率循环过程中焊层温度的预测。在温度波动不大的条件下,比较了被动热循环和主动功率循环时对焊接寿命的影响。     

城市轨道交通车辆受电弓弓头安全宽度的计算

分析了城市轨道交通车辆在直线段和曲线段中受电弓弓头的偏移影响因素以及接触线的受风偏移现象.根据比较车辆处于直线段和曲线段时的受电弓与接触线之间相对距离来确定受电弓弓头宽度的合理安全宽度,并设计了“城市轨道交通车辆受电弓宽度参数计算软件”.     

Dynamic stride length adaptation according to utility and personal space

Pedestrians adjust both speed and stride length when they navigate difficult situations such as tight corners or dense crowds. They try to avoid collisions and to preserve their personal space. State-of-the-art pedestrian motion models automatically reduce speed in dense crowds simply because there is no space where the pedestrians could go. The stride length and its correct adaptation, however, are rarely considered. This leads to artefacts that impact macroscopic observation parameters such as densities in front of bottlenecks and, through this, flow. Hence modelling stride adaptation is important to increase the predictive power of pedestrian models. To achieve this we reformulate the problem as an optimisation problem on a disk around the pedestrian. Each pedestrian seeks the position that is most attractive in a sense of balanced goals between the search for targets, the need for individual space and the need to keep a distance from obstacles. The need for space is modelled according to findings from psychology defining zones around a person that, when invaded, cause unease. The result is a fully automatic adjustment that allows calibration through meaningful social parameters and that gives visually natural results with an excellent fit to measured experimental data.     

Locating emergency vehicles with an approximate queuing model and a meta-heuristic solution approach

In this paper, the location of emergency service (ES) vehicles is studied on fully connected networks. Queuing theory is utilized to obtain the performance metrics of the system. An approximate queuing model the (AQM) is proposed. For the AQM, different service rate formulations are constructed. These formulations are tested with a simulation study for different approximation levels. A mathematical model is proposed to minimize the mean response time of ES systems based on AQM. In the model, multiple vehicles are allowed at a single location. The objective function of the model has no closed form expression. A genetic algorithm is constructed to solve the model. With the help of the genetic algorithm, the effect of assigning multiple vehicles on the mean response time is reported.     

放宽条件定点集结模式下编组站车辆 集结排队系统分析

集结模式决定了货车集结过程的结束条件，定点集结是一种高效率的集结方式，有利于提高运输质量.针对放宽条件定点集结模式下编组站车辆集结过程，建立离散时间批到达批服务排队模型，利用嵌入式马尔可夫链方法求得离去时刻瞬时系统集结车辆队长分布，并求得任意时刻车辆集结队长分布，在此基础上分别分析了最小编成辆数，车组大小分布，车流到达强度，服务时间间隔分布对车辆平均集结队长，集结延误时间，效率，一昼夜发送车流量等系统指标的影响.分析结果表明，各因素对车辆集结排队系统影响明显.因此，利用本文提出的模型能为编组站的精细化管理和车流组织优化提供决策参考.     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

高速路网不停车收费车道优化布设方法

合理设置高速公路收费站ETC (Electronic Toll Collection)车道数量，对高速公路通行效率至关重要。针对目前路网中ETC与MTC (Manual Toll Collection)车辆混行的情况，考虑ETC的普及率，结合多用户路网均衡模型和排队论方法，建立基于双层规划模型的高速路网ETC车道优化布设方法。上层模型以车辆总通行时间最小为目标，优化设置进出收费站的ETC车道数量；下层模型为多用户路网均衡模型，反映ETC和MTC车辆的路径和收费车道选择行为。下层模型通过设计收费站的等价拓扑结构，表征收费站的车道使用规则及车辆的收费车道选择行为，并采用排队论方法估计ETC和MTC车道的收费排队时间。根据模型的特点设计了基于主动集的启发式算法，利用参数二进制与拉格朗日函数法确定迭代下降方向，解决了下降方向与步长难以计算的问题；通过内嵌优化函数的方式，保证在主动集转化过程中上层约束均不会失效，且避免了迭代过程中的模型解退化问题。基于上海市绕城高速进行实证分析，结果表明：随着ETC普及率的提升，收费排队时长按照负指数趋势下降；与按比例布设ETC车道的方法相比，所提方法最高可降低57.4%的收费排队时间，且该方法可以避免ETC车道布设过多对于MTC车道通行能力挤压造成的负面效果。研究成果可以有效指导高速路网ETC车道的布设，提高路网通行效率。