某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

悬拼梁段长线台座吻合法预制施工关键技术探讨

深圳湾公路大桥非通航孔桥梁体施工,设计为分段预制,海上拼装,预制施工线形控制和梁段间吻合匹配,这些是其关键技术。重点介绍采用长线台座吻和法预制梁段时吻和匹配施工工艺,线形控制方法,台座设计检算及施工中易出现的问题等。     

基于分离迭代和耦合时变的列车—轨道—桥梁耦合系统高效动力分析混合算法

为提高列车—轨道—桥梁耦合系统动力分析的计算效率,基于耦合时变法及分离迭代法,提出了1种混合算法。该算法将列车—轨道—桥梁耦合系统分解为车辆—轨道子系统和桥梁子系统。其中,车辆—轨道子系统在每一时间步需根据车辆位置对系统刚度系数矩阵进行更新,具有时变的特性;桥梁子系统的系统动力系数矩阵在整个动力分析过程中保持不变;车辆—轨道子系统与桥梁子系统通过钢轨与桥梁间作用力的平衡迭代实现耦合。利用朔黄重载铁路32m简支梁桥现场试验数据与由混合算法计算得到的分析结果进行对比,验证了混合算法的可行性。采用耦合时变法和混合算法分别计算列车通过蒙华重载铁路黄河龙门大桥的动力响应,结果表明:采用相同的时间积分步长时,2种方法拥有相同的计算精度,但混合算法比耦合时变法具有更高的计算效率,求解耗时降低了75%。     

城轨车辆弓网匹配分析

文章主要从上海轨道交通13号线车辆的设计方面,从机械匹配和电气匹配两个方面对受电弓和接触网的关系进行分析,以满足弓网之间的良好匹配。     

城市快速轨道交通空气动力学相关问题探讨

随着城市轨道交通的快速发展,其设定的最高速度目标值突破了现行地铁相关规范最高速度的适用范围,许多在低速时可以忽略的空气动力学现象在快速时就变得不容忽视.结合目前的隧道阻塞比,给出城市快速轨道交通所出现的由空气动力学效应引起的相关现象,并结合地铁自身特点进行定性分析,提出相应的减缓措施,以期对进一步的研究提供参考方向,对...     

轻型汽油车改装柴油机后发动机悬置系统和冷却系统的优化设计

介绍在原有汽油车底盘的基础上改装柴油机后,发动机悬置系统和冷却系统的优化设计和匹配方法。建立了以发动机悬置系统能量解耦和固有频率为综合目标的优化模型,对悬置系统参数进行了优化。运用相似理论对风扇进行了优选和匹配。     

The planning and analysis of a new group rapid transit system: the SkyCabs monobeam system in Auckland

This paper examines a case study of the SkyCabs system as a way to alleviate some of the traffic problems of Auckland, New Zealand. SkyCabs is an elevated two-way monobeam carrying light eight-seater cabs on tracks on each side of the beam, available on demand, providing fast, pollution-free, unimpeded travel above the footpath with panoramic views of the city. The aim of this study is to investigate the attractiveness of implementing the SkyCabs system to and from Auckland central business district (CBD) and Auckland international airport by examining four variables: different routes, different number of stops/stations, different passenger demand levels, and different number of cabs in the system. The analysis utilizes geographical information system and simulation tools for the various scenarios considered. The results show that it is possible to assess the cost–benefit of alternative routes in terms of those four variables and rate of return on investment.     

Cost-effectiveness of reductions in greenhouse gas emissions from High-Speed Rail and urban transportation projects in California

A rising trend in state and federal transportation finance is to invest capital dollars into projects which reduce greenhouse gas (GHG) emissions. However, a key metric for comparing projects, the cost-effectiveness of GHG emissions reductions, is highly dependent on the cost-benefit methodology employed in the analysis. Our analysis comparing California High-Speed Rail and three urban transportation projects shows how four different accounting framings bring wide variations in cost per metric tonne of GHG emissions reduced. In our analysis, life-cycle GHG emissions are joined with full cost accounting to better understand the benefits of cap-and-trade investments. Considering only public subsidy for capital, none of the projects appear to be a cost-effective means to reduce GHG emissions (i.e., relative to the current price of GHG emissions in California’s cap-and-trade program at $12.21 per tonne). However, after adjusting for the change in private costs users incur when switching from the counterfactual mode (automobile or aircraft) to the mode enabled by the project, all investments appear to reduce GHG emissions at a net savings to the public. Policy and decision-makers who consider only the capital cost of new transportation projects can be expected to incorrectly assess alternatives and indirect benefits (i.e., how travelers adapt to the new mass transit alternative) should be included in decision-making processes.     

个人快速交通技术发展现状与应用展望

个人快速交通将进入商业化运营.对个人快速交通的发展历程、类型与技术经济特征进行了较为系统的论述.依据其目前实施情况,给出了可能的应用方向.个人快速交通较适合在下列场合使用:特定场所(如机场、高档开发区等),都市繁华区域短距离联系,市郊有较高活力的区域.为我国城市交通选型提供借鉴.