预制综合管廊接头抗剪性能与等效模拟方法

预制管廊接头力学性能及设计方法研究尚属于起步阶段,理论尚不成熟,对接头受力性能的认识尚不清晰。为研究预制管廊接头的抗剪性能及影响因素,基于福建省平潭预制拼装综合管廊工程,以典型的双舱和三舱预制拼装综合管廊结构为例,采用PLAXIS 3D岩土有限元程序建立预制管廊接头精细化三维数值模型,深入分析管廊接头的抗剪性能及影响因素,并提出合理实用的管廊接头等效模拟方法。研究结果表明,不设置剪力键时接头的极限总剪力降低了11.1%,设置剪力键能够明显地改善接头的抗剪性能;接头剪切强度和剪切刚度均与预应力基本呈线性关系;采用等效界面模型可以比较合理地模拟剪力键接头的抗剪力学行为。     

Critical review of handling diagram and understeer gradient for vehicles with locked differential

The steady-state cornering behaviour of rear-wheel drive vehicles fitted with locked differential is critically analysed by means of simple, albeit carefully formulated, vehicle models, which allow for a rigorous theoretical analysis. Results obtained for some classical manoeuvres, with either constant forward speed, steer angle or turning radius, clearly show that, in the case of locked differential, the vehicle cornering behaviour is strongly affected by the manoeuvre. As an important consequence, the handling diagram is not unique and the understeer gradient is no longer dependent only upon the lateral acceleration, as in vehicles equipped with an open differential. Accordingly, this study shows that some typical tools and concepts of vehicle dynamics are indeed inadequate in the case of locked differential.     

GTM的压实原理及设计指标与路用性能的相关性分析

GTM的设计思路提出解决目前汽车触地压强不断上升的途径,应用GTM减少沥青路面在重载交通下出现车辙、推移等剪切破坏.试验证明,沥青路面的表现与GTM的设计指标存在良好的相关性,因此GTM具有很好的推广价值.     

湿陷性黄土地基强夯和冲击压实技术经济分析

0引言湿陷性是指土在自重或附加应力与自重共同作用下受水浸湿后产生急剧而大量的下沉。国标中规定:当sδ≥0.015时,为湿陷性黄土。通常湿陷性黄土地基较多采用强夯法处理,其主要特点是适应性强,经济简便;而冲击压实技术是20世纪90年代从南非蓝派公司引进,具有减少工后沉降效果     

复合材料圆柱壳的稳定性及其优化设计

本文分别利用一阶剪切理论和Reddy高阶剪切理论计算了考虑横向剪切变形影响的复合材料层会圆柱壳的线性失稳载荷和几何非线性失稳载荷。分析了壳体的几何参数、铺层数、铺层角、半径厚度比值对失稳临界行值的影响。铺层的优化设计中利用随机试验法与可变容差法相结合，计算了寻求临界行值最大的铺层角最优问题，并利用约束非线性混合离散变量优化程序对铺层角为离散值的情况进行了优化。碳纤维环氧树脂圆柱壳模型试验表明本文计算结果是可靠的。     

薄壁箱梁剪滞剪切效应自振特性分析

在推导考虑剪力滞、剪切变形双重效应的单元刚度矩阵与等效结点荷载矩阵的基础上[1],进一步推导出考虑双重效应的单元质量矩阵,从而形成完整的薄壁箱梁考虑双重效应的矩阵分析体系,可方便地纳入矩阵位移法程序系统,为常见的薄壁连续梁等复杂结构的剪力滞效应分析提供一种计算手段。利用自编程序ZLBOX对薄壁箱型简支梁和悬臂梁考虑剪力滞、剪切变形双重效应时的自振特性进行了分析,所得结果与ANSYS实体单元计算结果符合良好。计算结果表明,剪力滞、剪切变形双重效应使薄壁箱梁的自振频率降低,剪力滞效应占双重效应的85%以上,双重效应对高阶频率的影响比低阶频率的影响大。     

Driver requirements and road traffic informatics

Initially the driver's role as a link in the driver-vehicle-road-traffic control-chain is discussed in a historical perspective. The gradual changes and the advantages and problems arising from these changes are discussed from behavioural point of view.Then the driver tasks are analyzed. A separation is made between trip planning, navigation, road following, traffic interaction, rule compliance, other than traffic tasks, car handling and speed choice. The relations between and the weights of these subtasks are discussed. Some existing driver behaviour models are reviewed in relation to the above mentioned tasks.Finally an effort is made based on the analyses of driver tasks and driver models to specify some general and some more specific potential advantages and problems with expected future RTI-systems.     

中厚度扁球壳大挠度分析的新模型

本文探讨横向剪切在壳体响应中的作用。基于Ｒｅｉｓｓｎｅｒ－Ｍｉｎｄｌｉｎ横向剪切应变非零的假设，导出扁球壳完整的非线性几何方程，引入平均转角的概念。建立了扁球壳进行大挠度分析的一种新模型，该模型适用于扁薄球壳到中厚度扁球壳，其控制方程仅含４个未知量。工程算例及实验研究表明该模型具有很好的精度高。     

轨道交通曲线连续 钢—混组合梁抗剪分析

论述在钢混组合梁计算中,规范中按实体梁横向弯曲剪应力计算,没有扭转剪应力计算的规定。曲线组合梁的扭矩较大,讨论是否需要考虑扭转剪应力的影响。结合工程实例,计算分析自由扭转剪应力,按闭口薄壁构件和实体梁分别计算弯曲剪应力,并对计算结果进行对比分析,提出合理的计算方法。