先期振动对高聚物胶凝堆石料动变形特性的影响

先期振动对土石坝地震变形影响显著。通过开展不同先期动应力作用下的动三轴试验,研究了先期振动对未加固堆石料和高聚物胶凝堆石料动变形特性的影响。结果表明:先期振动对未加固堆石料和高聚物胶凝堆石料的弹性轴应变无明显影响,但显著降低了其塑性轴应变;未加固堆石料和高聚物胶凝堆石料的残余变形在先期振动影响下显著减小,与未经受先期振动的试样相比,先期动应力为40%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为48.1%和42.0%;先期动应力为80%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为80.9%和71.6%。先期动应力幅值越大,再次经历动应力时未加固堆石料和高聚物胶凝堆石料产生的残余变形越小,抵抗变形能力提高越明显。最大残余变形的降低幅度与固结比、围压及高聚物含量无关。随后修正了沈珠江动残余变形模型,修正后的残余变形模型可以反映高聚物对堆石料残余剪应变和残余体应变的影响。与未经受先期振动的试样相比,先期动应力为40%围压的高聚物胶凝堆石料(高聚物质量比R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了27.7%和61.2%;先期动应力为80%围压的高聚物胶凝堆石料(R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了68.8%和79.3%。     

引汉济渭工程岭北TBM无扩大洞室刀盘边块更换技术

本文以陕西省引汉济渭工程岭北TBM施工段为依托,为解决TBM在狭小空间内较大部件更换维修困难难题,开展大直径TBM刀盘边块在狭小空间内更换技术研究。通过大量研究,创新性提出新刀盘边块更换方法——基坑法,即通过专用设备配合TBM固有性能,在无扩大洞室工况下完成刀盘边块更换。经岭北TBM刀盘边块更换实例证明,此方法操作简单、适用性高,尤其在狭小空间内更具有优越性,且能节省大量维修时间,有效提高施工工效,可为同类TBM施工提供有益借鉴。     

The uplift capacity of single-plate helical pile in shallow dense sand including the influence of installation

The helical pile has been used to resist the tension for a long time. However, the prediction of the uplift capacity of helical piles including the influence of installation is still a challenge in design. Based on the change in stress according to Mohr-Coulomb failure criterion, a simple theoretical method has been developed, which can calculate the uplift capacity of shallow pre-embedded circular plate anchors and the uplift capacity of helical piles installed by torque and compression. In order to analyse the influence of installation process of a single-plate helical pile on its uplift capacity and verify the theoretical model, a series of model tests have been conducted in dense saturated sand. The single-plate helical piles with different out diameters of helixes have been installed with different installation speeds, and then, the single-plate helical piles have been moved up monotonically. The test results show that the installation speed and the size of the out diameter of the helix have significant influence on the uplift capacity of the helical piles, and the results of the theoretical method have a good fit with the test results. Using this simple theoretical method, the designer can easily predict the uplift capacities of helical piles, which includes the influence of installation.     

感应充电路面技术研究现状与展望

以感应充电技术(Inductive Power Transfer,IPT)为主要特征的充电路面(Electrified Road,e-Road)近年来发展迅速，其可为行进中的电动汽车进行动态无线充电，有效解决电动汽车充电时间过长、续航里程不足等问题，是支撑未来公路交通电气化发展的重要储备技术。详细介绍了IPT系统的工作原理和性能特点，并总结了已有e-Road试验段的充电性能参数和技术就绪度水平。在此基础上，进一步从基础设施角度剖析了e-Road目前存在的主要工程问题及相关研究进展，内容包括：①深入分析了IPT系统工作时因高频磁场通过介电性路面材料所引起的电磁损耗对IPT系统充电效率的影响，并提出了可能的解决方法；②针对充电模块与普通沥青路面存在的力学兼容性问题，从结构受力原理、材料损伤特性等方面总结了e-Road复合结构产生力学损伤加剧效应的原因，并提出了耐久性优化措施；③针对e-Road环境可持续方面存在的不确定性，评估并对比了e-Road与传统道路的全生命周期环境效益，指出了e-Road环境性能研究对电动汽车全生命周期综合效益估算的重要性。此外，还从政策支持、安全性、价格因素等角度对e-Road进行了综合可行性评估，并对充电路面基础设施的未来发展进行了智能化展望，提出了e-Road与其他新型智能道路技术进行有机融合的可能途径。     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

包头地区筑路材料的分布与选择

针对内蒙古包头地区筑路材料的分布特征，结合工程实践进行归纳分析，并提出相应的见解，可供设计时参考。     

旧水泥混凝土路面加铺沥青混凝土面层勘测设计

旧水泥混凝土路面加铺沥青混凝土面层，当没有路线设计资料时，需对旧有路线进行拟合，重新进行勘测设计，以获得与旧有路线一致的路线设计资料，为旧水泥混凝土路面加铺沥青混凝土面层提供设计依据。结合工程实践，介绍了拟合旧有路线时勘测设计的内容和方法。     

旧路改建工程设计

结合莞惠公路改建工程的设计经验,介绍改建公路设计时技术标准的应用,道路中线及路面结构的选择,阐述了如何进行加固和接长桥涵验算设计。     

特殊条件下的真空预压密封技术

结合广州港南沙港区二期工程软基处理工程实例,针对在局部有抛石地段的软土采取真空预压方法加固时传统的挖密封沟和施打淤泥搅拌墙技术存在相当大困难的情况,提出了在有抛石地段采取高压旋喷桩密封技术。实测结果表明,采取该技术密封效果良好,真空度能达到设计要求。与堆载方案相比,采取本技术经济效益良好,具有较好的推广价值。     

Young drivers and graduated licensing: The Ontario case

Despite improvements in road safety over the past several decades, accident rates remain high for young drivers. One accident countermeasure that is expected to improve the safety record of this group is graduated licensing. The philosophy behind this licensing system is that novice drivers, of whom the majority are young, should be restricted to relatively safe driving environments during the initial learning period. Graduated licensing was implemented in the Province of Ontario, Canada in 1994. The objective of this study is to estimate the potential benefits and costs for young drivers associated with two components of the Ontario graduated licensing package: the late-night driving curfew and the high-speed roadway restrictions. Based on accident and travel data for the year 1988, accident-involvement rates per kilometre driven were calculated for different driver groups for various combinations of time of day and roadway speed limit. These rates were then applied to the expected mobility profiles of young drivers affected by graduated licensing. The results of the study support the late-night curfew and suggest that this component of the licensing package should reduce total accident involvements for the affected group by up to 10 percent and fatal accident involvements by up to 24 percent, while reducing their total driving by only four percent. By contrast, the empirical evidence suggest that the high-speed roadway restrictions are likely to increase accident involvements, and thus it is strongly recommended that this component of Ontario's graduated licensing package be changed.