Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

地铁专用回流轨牵引供电系统应用方案

分析了常规地铁牵引供电系统采用走行轨兼做回流轨存在的问题,以及杂散电流腐蚀问题带来的严重危害。针对目前专用回流轨技术方案发展现状,推荐采用网轨混合牵引供电系统的应用方案。通过对该方案中重点问题的分析,推荐采用专用回流轨和接触网同位置设置电气分段的方案,在牵引供电上网点和回流点处设双极隔离开关;推荐在负极对地之间设置单向导通装置作为漏电保护装置;推荐设置绝缘监测装置对各区段的专用回流轨对地绝缘状况进行定期监测,以便及早发现绝缘薄弱点并清查处理。     

客运专线牵引变压器选型综合分析

在分析高速牵引负荷特性的基础上,基于为机车提供可靠供电和满足用电的相应国家标准和技术规则的综合要求,从电力系统、综合补偿、机车3个方面论及了客运专线牵引主变压器接线选型。     

我国电力机车及动力车通风系统

简要地说明了我国电力机车及动力车通风系统的发展情况，尤其是交流传动技术对我国电力机车及动力车通风系统的发展的重要影响，同时，还详细分析了各种通风方式的特点，为电力机车及动力车通风系统简统化设计提供了多种选择模式。     

电力机车车轴热处理工艺的研究

分析了EA4T钢的性质特征以及传统调质处理工艺所存在的问题,系统地研究了正火、淬火及回火工艺对材料的组织及性能的影响规律。通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。     

烟大铁路轮渡渡船电力推进系统仿真分析

随着计算机仿真技术在工程研究领域的广泛应用,船舶电力系统数字仿真已成为高效的船舶电力系统分析手段.烟大火车渡船采用了当今国际先进的电力推进系统,通过对该系统进行了数字仿真分析,验证了该船电网运行的稳定性和可靠性.     

SS7型客货运电力机车（1）：特点及技术参数

SS7型客货两用相控电力机车采用B_0-B_0-B_0转向架,全叠片复励牵引电动机及相应的主电路和电子控制系统、壳式卧放主变压器、再生制动等多项新技术,具有近代相控机车的先进求平。本文介绍该型机车的基本特点和主要技术参数。     

机车用AC 3 kV真空接触器的设计

基于一般工业用真空接触器的总体布置形式和传动方式，根据机车用真空接触器的结构特点，对机车用ＡＣ３ｋＶ真空接触器的设计原则及设计中的一些问题作了介绍。     

SS5型客运电力机车 10：电子控制系统

SS5型电力机车设有两套控制系统,一套为闭环自动控制系统,用于牵引、制动、防空转、功率因数补偿等控制,另一套为简单的开环控制系统,用于控制全控桥和半控桥的脉冲移相,以调节电机电压。作者叙述了电子控制柜的主要结构特点,并通过对系统框图的介绍,阐明了电子控制系统的主要工作原理,其中特性控制技术、顺控技术、再生制动控制技术、防空转技术等都是首次在国产机车上采用。