浅水立波底部附近悬沙含量的二维分布

本文应用卡门理论得到浅水立波紊动粘性系数的计算式,再由此求出浅水立渡底部附近悬沙含量的二维解答,与Hattori的半经验结果符合良好。     

一种改进的基于密度和网格的高维聚类算法

提出了一种改进的基于密度和网格的高维聚类算法,并对算法有效性进行了验证.该算法通过减少样本点数量的方法达到减少稠密子空间数量.在发现高维稠密子空间时,对样本库进行精简.这些样本点的求得能有效减少求解最小聚类的时间复杂度.     

The Reinforcement Analysis of Prestressed Anchor Frame Beam in the Deep Cutting Slope under Three Dimensional Strong EarthquakeEI北大核心

Research purposes: In order to further study the reinforcement of prestressed anchor frame beam in the deep cutting slope under three dimensional strong earthquake, a model of the deep cutting slope is built through FLAC 3D simulation software, the seismic wave to the model from three directions of x,y and z is input, and the dynamic response of the slope is analyzed. Then, the prestressed anchor frame beam reinforcement measures are applied to the model, and this paper analyzes the reinforcement effect of the prestressed anchor frame beam to the deep cutting slope under three dimensional strong earthquake. Research conclusions:(1) The prestressed anchor frame beam has a good effect on restraining the horizontal displacement of the deep cutting slope. (2) Under the three dimensional strong earthquake, the prestressed anchor frame beam has a good effect on the horizontal acceleration and horizontal velocity of the deep cutting slope, which reduces the peak of horizontal acceleration and horizontal velocity. (3) Through the comparison of the response before and after the reinforcement of the prestressed anchor frame beam is given under the 9 degrees three dimensional strong earthquake, it can be concluded that the prestressed anchor frame beam can provide good reinforcement effect to the deep cutting slope. (4) This research can be used for reference to the earthquake resistance of the slope engineering. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

基于双参数雨流法的地铁车辆转向架构架寿命评估

采用双参数雨流法对在线实测的地铁车辆转向架构架载荷时间历程进行计数统计,分离出完整的应力循环和半循环,表征了构架服役过程的随机载荷谱块。根据名义应力法理论及miner疲劳损伤累积理论,估算出了地铁车辆转向架构架的疲劳寿命。分析结果表明,测点处的寿命为13.4年左右。     

车辆碰撞事故空间模拟再现系统开发研究

在完成了车辆碰撞事故分析计算方法研究的基础上,建立汽车三维四轮动力学计算模型,并引入OpenGL标准图形库与VisualC 编程环境相结合的三维真实感图形技术,开发了针对实际车辆碰撞交通事故的空间模拟再现系统。     

三维植被网路基边坡防护

三维植被网作为一种新型的坡面防护材料 ,具有很好的使用性能和推广价值。本文详细介绍其特点、优点以及施工工艺。并给出运用实例     

无铅阴极电泳涂料的应用试验

为满足日益严格的环保法规和适应人类社会和谐、可持续发展的要求，开展了用无铅阴极电泳涂料LB-20LF置换含铅阴极电泳涂料HB-2000LB的试验工作。介绍了LB-20LF涂料的主要技术特征、试验室小试情况和结果，以此为基础，在生产线上成功实现了由HB-2000LB向LB-20LF的过渡和转换。还简要介绍了有关的、其他方面的如设备、工艺参数管理的改进等。试验结果表明，使用LB-20LF可提高涂膜的光泽和膜厚均匀性、改善了工件袋部的涂覆状况，可全面提高车体电泳涂层的质量。     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法研究

文章主要研究了利用硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法,对硅胶吸附管的规格、待测样品的浓度、采样参数等进行了详细的讨论及验证。研究表明,利用硅胶吸附管采集甲醇的过程中,很容易发生甲醇的穿透。随着硅胶颗粒装填数目的增加,甲醇的穿透率降低,实际吸附甲醇的效率增加。在采样流量相同时,待测样品浓度越高,甲醇的穿透率越高。在待测样品浓度相同时,采集流量越高,甲醇的穿透率越高。将硅胶吸附管串联,可以有效减少甲醇的穿透,提高吸附效率。