Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

接触网检测车数据处理软件

本文通过分析接触网检测车数据处理系统的数据流向，数据组成及工作过程，确定了软件结构，软件功能及数据结构，同时讨论了软件设计中所采取的主要技术。     

基于闭环力反馈原理的非线性液压主动阻尼悬架模型的研究及优化设计

本文在理论上建立了一套基于主动力反馈原理的新型主动阻尼悬架的设计和优化方法。首先提出了该主动阻尼悬架的实现模型，该模型是在传统的液力减振器的基础上，应用半主动控制的思想，结合力反馈的原理建立起来的内部液压反馈阻尼网络模型。理论优化分析和计算机仿真表明，通过该液阻网络模型，即可以实现电控的主动阻尼悬架的功能，它可以根据汽车行驶路况的好坏，自适应地调节悬架阻尼大小以实现主动阻尼悬架的最优控制。     

Simulation studies of information propagation in a self-organizing distributed traffic information system

This paper investigates the feasibility of a self-organizing, completely distributed traffic information system based upon vehicle-to-vehicle communication technologies. Unlike centralized traffic information systems, the proposed system does not need public infrastructure investment as a prerequisite for implementation. Due to the complexity of the proposed system, simulation is selected as the primary approach in the feasibility studies. A simulation framework is built based on an existing microscopic traffic simulation model for the simulation studies. The critical questions for building the proposed market-driven system are examined both from communication requirements and traffic engineering points of view. Traffic information propagation both in freeway and arterial networks via information exchange among IVC-equipped vehicles is tested within the simulation framework. Results on the probability of successful IVC and traffic information propagation distance obtained from the simulation studies are generated and analyzed under incident-free and incident conditions for various roadway formats and parameter combinations. Comparisons between the speed of the incident information wave and the speed of the corresponding traffic shock wave due to the incident are analyzed for different scenarios as the most crucial aspect of the information propagation as a potential foundation for application in such a decentralized traffic information system.     

人工神经网络在故障诊断系统中的应用

人工神经网络以其独到的联想、记忆、储存和学习功能，在故障诊断领域受到了广泛关注。其中，BP网络是最成熟、应用最广泛的一种网络。但BP网络在实际应用中也存在诸多不足，如学习率的取值需要凭借经验或试算选取，网络学习收敛速度慢以及易陷入局部最小点等。针对BP网络的这些不足，采用了Rumelhan附加惯性冲量和动态调整学习率相结合的改进的BP网络方法，并尝试用该改进算法来对凝汽器进行故障诊断。事实证明，在平均情况下，本系统收敛速度远远快于基本的BP算法。     

专用铁路综合数据通信网建设方案探讨

铁路综合数据通信网,是铁路信息化建设的基础平台,建设时首先应完善铁路基础通信网,然后从业务需求、网络结构、技术方案、网络管理、安全策略等几个方面综合考虑,合理规划,有效实现资源最大化的目标,使专用铁路信息化建设更科学、更合理。     

基于无线Mesh网络技术的列车宽带接入原型系统设计

随着高速铁路、公路交通的发展,信息网络的移动接入技术需要得到相应的改善和提高。根据公共移动通信网和铁路专用移动通信网的发展现状,目前有多种列车移动接入技术。通过方案比较,本文原型系统采用了基于无线Mesh网络技术的无线宽带接入技术。当前,无线Mesh网络可遵循的标准有IEEE802.11s草案,该草案对无线Mesh网络的功能、接口及网络协议栈进行了全面的定义。本文根据IEEE802.11s草案,在Linux操作系统下定义了Mesh协议栈框架,并在此基础上设计实现了针对列车的车地宽带接入带状应用场景的无线Mesh网络原型系统,并就搭建的实际网络场景进行了性能测试。实验结果表明,所设计的原型系统基本达到了列车车地宽带接入应用的要求。     

用改进的前向神经网络预测铁路货运量

对影响铁路货运量的因素进行了分析。根据影响铁路货运量的诸因素的特点，介绍了一种改进的前向神经网络预测方法，并建立了铁路货运量前向神经网络预测模型。算例表明，其预测精度高于常规预测方法。     

基于人工神经网络的柴油机故障诊断

故障诊断是计算机模式识别领域的一个活跃课题。文中提出了基于人工神经网络的柴油机故障诊断方法，设计了适合该诊断系统的BP网络结构，并给出了一种基于黄金分割法改进的BP算法，用来自适应调整网络学习速率。仿真结果表明：该算法具有很快的学习速度和较高的学习精度，完全适用于柴油机故障诊断系统。     

薄壁杆件六面体网格剖分的组装法

针对箱梁等薄壁杆件的六面体网格自动生成问题,提出以下算法:在内外壳表面上,根据其拓扑关系和几何位置,采用映射和插值的方法布设节点;根据各个壳节点三维位置和拓扑关系对其进行编号;采用动态规划的方法,根据壳之间的拓扑几何关系组装内外壳,统一节点编号,生成单元。应用以该方法编制的相应计算软件对一座三跨连续箱形梁桥进行网格剖分。结果表明:该算法简单,效率高,生成的单元质量好。