Online channel strategies under different offline channel power structures for the Belt and Road of China

ABSTRACT

This paper explores the online channel strategies adopted by Chinese manufacturers with regard to the Belt and Road. It also investigates the effect of offline channel power structures and maritime transportation costs on online channel mode selection and pricing strategies. The offline channel power structures are classified into three types, namely, Chinese manufacturer Stackelberg (MS) structure, vertical Nash (VN) structure, and foreign retailer Stackelberg (RS) structure. Furthermore, a game model is developed among the Chinese manufacturer, foreign retailer, and cross-border e-tailer to investigate the interactions among offline channel power structures, maritime transportation costs, and Chinese manufacturers’ online channel mode selection. The results show that Chinese manufacturers’ preferences for the online agency selling mode increases correspondingly with the decrease in their market position and bargaining power. Moreover, foreign retailers can obtain higher profits in the online agency selling mode under the VN structure. However, the level of profit for foreign retailers depends on the intensity of their competition with cross-border e-tailers under the MS and RS structures. Finally, consumers in countries along the Belt and Road can obtain a higher surplus in the online agency selling mode under all of the structures.     

三峡船闸(139m水位)一闸室船舶待闸研究

通过优化三峡船闸输水阀门运行参数,满足了船舶在一闸室待闸的停泊条件;组织代表船型进行实船试验,形成了连续调度快速安全的调度工艺,取得了在139m水位条件下,三峡船闸下行通航效率提高15%的效果。     

强化胎盘因子对细胞因子产生的影响

在观察了强化胎盘因子对淋巴细胞增殖试验影响的基础上,应用CTLL-2和7TD_1两种细胞株对强化胎盘因子刺激后的小鼠脾脏细胞分泌白细胞介素-2(IL-2)和白细胞介素-6(IL-6)水平分别进行了实验研究。结果表明,强化胎盘因子促进T淋巴细胞增殖,使小鼠脾脏细胞分泌IL-2和IL-6水牛均明显提高,有增强机体免疫功能的作用。     

温州乐清湾港区试挖槽监测分析

乐清湾避风条件好,潮流动力强,含沙量小,具有较好的建港条件。介绍了乐清湾试挖槽情况,对试挖槽进行了监测分析,指出数据分析表明试挖槽基本处于冲淤阶段,乐清湾港池开挖实行浅水深用的开发方案是可行的。     

机车车辆动力学研究及发展

机车车辆动力学在最近10年得到迅速发展,考虑车辆—轨道耦合作用的耦合模型得到广泛应用。随着大跨距跨江铁路桥的建设,车和桥的耦合振动会引起接触网的振动,进而影响弓网的耦合振动。因此十分有必要开展接触网—受电弓—机车车辆—线路—桥梁耦合大系统动力学的研究。进行机车车辆动力学性能优化,必须首先确定机车车辆动力学三要素的优先关系,即运行的稳定性—安全性—平稳性,建立以列车为研究对象的模型,同时在模型中考虑机车车辆结构弹性和频变特征悬挂参数以及气流扰动的影响,进而进行灵敏度分析和参数优化。给出考虑频变特性的钢弹簧等效计算方法以及基于循环变量的列车系统动力学建模和计算方法,并验证了计算方法的有效性。     

IPv4与IPv6的比较研究

文章主要描述了IPv4协议与 IPv6协议的不同之处,分别从首部格式、地址空间、地址分配、路由协议、域名解析、自动配置、安全性等方面对IPv6与IPv4进行了比较研究。指出了IPv6有别于IPv4的新的重要特征。     

黄土湿化特性的三轴试验研究

研究目的：本文旨在通过三轴试验，研究黄土湿化应力应变关系、强度特征及影响因素。 研究方法：通过等围压固结湿化试验和三轴剪切湿化试验进行研究。 研究结果：获得不同围压条件下固结湿化变形随时间变化规律，初始含水量、压实度的影响规律；获得不同应力水平下湿化应力应变关系、剪切湿化变形规律以及湿化对强度的影响等成果。 研究结论：（1）湿化变形受初始含水量及压实度的影响很大；（2）湿化条件与不浸水条件下，应力一应变关系均表现为应变硬化特性；（3）剪切湿化体积变形随应力水平的增加而减小，轴向变形随应力水平的增大而增大；在同一应力水平下，体积变形与轴向变形均随平均主应力的增大而减小；（4）湿化不仅降低了黄土的强度，也降低了黄土达到破坏时的应变。     

中间轴驱动装置固定对弹性悬挂式机车动力学性能的影响

为防止弹性悬挂式机车中间轴驱动装置横向位移过大,发生碰撞,提出了端轴驱动装置弹性悬挂、中间轴驱动装置固定连接的方式。利用多体动力学软件SIMPACK建立整车动力学模型,对比分析驱动装置悬挂方式对机车动力学性能的影响,认为采用这种悬挂方式是合理可行的。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

用PROLOG语言在第五代计算机中实现三种同步机制

以日本新一代计算机技术研究所研制的个人顺序推理机ＰＳＩ为模型，详细讨论了用ＰＲＯＬＯＧ语言在新一代计算机操作系统中实现忙式等待、信号灯、条件临界区三种同步机制的情况，并进行了评价，软件模拟程序已在微机上调试通过。