列车运行数字仿真及其在技术标准优化建模中的应用

本文详细论述了列车运行数字仿真模型和基于仿真计算结果的运营指标的建模方法，并给出了仿真逄例也结果分析，以列车运行数字仿真的计算结果作为建模的基础数据具有一致性和可比性强，模型可靠且精度高的特点。本研究为铁路主要技术标准综合优化的推广使用奠定了必要的基础，具有广阔的应用前景。     

臂式地铁接触轨几何状态参数检测小车研究

为解决地铁接触轨几何状态参数人工检测精度低、效率低、工人劳动强度大等问题,在调研国内外相关技术现状的基础上,充分考虑测量精度和效率要求、测量空间对测量机构体积和质量的限制等内外部因素,研发一种基于平行四边形机构的臂式地铁接触轨几何状态参数连续检测小车。小车基于接触式测量原理,对小车进行机械机构设计和参数设计,建立数学模型,然后对采集的数据进行计算分析,验证接触式测量的有效性。试验证明,该检测小车拉出值的综合检测精度达到0. 1 mm,导高综合检测精度达0. 17 mm,其测量效率和精度能很好地满足地铁接触轨几何状态参数检测的要求。     

弓网接触力检测方法介绍

通过检测弓网之间的接触力可以获得接触网与受电弓之间接触状况及其存在缺陷的数据信息,从而指导接触网的维修作业,以保证电气化铁路运输生产安全。介绍目前各国常用几种弓网接触力检测技术及方法,并对其进行综合对比分析,以供我国电气化铁路弓网检测技术研究和应用参考。     

电气化铁路用压接式接触线电连接线夹试验分析与研究

从接触网用压接式接触线电连接线夹的技术条件、成型机理及影响因素等方面入手,利用理论计算和试验验证等手段,分析电连接线夹产生松脱及裂纹的原因。同时,对进口及国产电连接线夹的化学成分、物理性能、机械性能、电学性能和压接工艺进行了试验和研究,并提出改进建议。     

Regulatory reform and freight mode choice

Reform of trucking Vehicle Weights and Dimensions (VWD) regulations in Canada is now underway. The effect these reforms will have on the freight transportation industry are only recently the subject of research. This paper is part of this new research effort, aimed at understanding how regulatory reform in the trucking sector will affect the existing competitive relationship between trucks and the railways. The paper presents the results of study and research into modelling the relationship between mode choice and the service characteristics that are affected by VWD reform.Using several periods of data, a series of econometric models are developed which help to elucidate the relative relationships between the mode service characteristics for both of the principal interprovincial freight modes. A technique is developed and presented to model railway user costs in order to overcome the complex and often unrepresentable pricing activities of Canadian railways.The strength of the developed econometric models is presented, including their significance and statistical reliability. This is further reinforced by the similarities exhibited by all the models in the series. The selected model is applied to predict market service responses required of the railway industry in order to compete with the trucking sector now adapting to the new regulations.The impact of the newly implemented vehicle weight and dimension reform on the rail transportation industry is analyzed and railway industry improvements aimed at maintaining its market share are presented. The results predicted by the model show that railway user cost reductions should be moderate, and likely less than the level of inflation over the period of time when trucking converts its fleet to take advantage of the new regulations.Abbreviations AASHTO American Association of State Highway and Transportation Officials - CCMTA Canadian Conference of Motor Transport Administrators - EPI End products, inedible commodity classification - GVW Gross Vehicle Weight - NA 1988 VWD National Agreement - RTAC Roads and Transportation Association of Canada - VWD Vehicle Weight(s) and Dimension(s) - WA 1988 VWD Western Agreement     

汽车防追尾碰撞数学模型研究

为了提高车辆在高速行驶状态下的主动安全性能,研究了处于追尾行驶状态的本车与前车的运动学特征;针对前车的不同运动状态分别推导出了跟车距离的计算模型并分析了模型中3个关键参数的随机性和动态性,对制动迟滞时间提出了基于模糊推理的确定方法,对本车制动减速度和前车的运动加速度提出了比较实用的动态测算公式;另外,研究了防追尾碰撞的控制与执行,建立了动态调整安全制动停车距离的神经网络模型,提出了基于危险裕度判别的安全控制方法。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

哈牡线季节性冻土接触网基础处理措施探讨

针对哈尔滨至牡丹江电气化改造工程季节性冻土分布的实际工程特点,结合季节性冻土条件下接触网基础的设计理念,对本项目选用的扩大型钢柱基础和不带扩底的拉线基础进行切向冻胀应力计算分析,并考虑影响切向冻胀力的水分、土质、负温以及基础侧表面的粗糙度等主要因素,提出了对钢柱基础采用换填加扩大型基础的处理措施,对接触网的下锚拉线基础提出了换填及加大埋深等防冻胀处理措施以抵抗季节性冻土的上拔力。     

Continuum theory for pedestrian traffic flow: Local route choice modelling and its implications

This contribution puts forward a novel multi-class continuum model that captures some of the key dynamic features of pedestrian flows. It considers route choice behaviour on both the strategic (pre-trip) and tactical (en-route) level. To achieve this, we put forward a class-specific equilibrium direction relation of the pedestrians, which is governed by two parts: one part describing the global route choice, which is pre-determined based on the expectations of the pedestrians, and one part describing the local route choice, which is a density-gradient dependent term that reflects local adaptations based on prevailing flow conditions.Including the local route choice term in the multi-class model causes first of all dispersion of the flow: pedestrians will move away from high density areas in order to reduce their overall walking costs. Second of all, for the crossing flow and bi-directional flow cases, local route choice causes well known self-organised patterns to emerge (i.e. diagonal stripes and bi-directional lanes). We study under which demand conditions self-organisation occurs and fails, as well as what the impact is of the choices of the different model parameters. In particular, the differences in the weights reflecting the impact of the own and the other classes appear to have a very strong impact on the self-organisation process.     

Catenary riser sliding and rolling on seabed during induced lateral movement

Catenary risers have an interaction zone with the seabed, usually referenced as flowline. Movements in this region can be induced by sea currents and large offsets in floating unit, leading to touchdown position changes and affecting internal loads along riser length. In this work the contact flowline-seabed is modeled including sliding and rolling friction. Case studies involving large offsets in floating unit and lateral sea currents are solved to better understand the consequences of possible rolling and large sliding. The riser is modeled using a geometrically-exact finite element beam model. The contact is addressed with a new technique to include rotation movements from underlying beam models. This leads to global riser models including complex kinematics, being able to represent scenarios with alternating sliding/rolling and its consequences on internal loads of riser structure. A parametric study is performed to measure the influence of the friction coefficient in tension and torsion along typical flexible pipe and steel pipe catenary risers.