浮冰冲击作用下的乙烯运输船体 舷侧结构强度分析

对无限航区的21000m3乙烯运输船舷侧结构,分别采用纵骨架式和横骨架式冰区加强设计。根据FSICR规范要求,更新舷侧冰带区域内构件尺寸,并针对艏部冰带区域内船体结构,分别建立了原始的、纵骨架式的和横骨架式的冰带结构设计有限元模型。通过强度计算,认为艏部冰带区新结构满足规范设计载荷要求。在此基础上,单独建立艏货舱冰区舷侧外板板架有限元模型,研究两种新设计形式适用的外板在更大浮冰冲击载荷作用下塑性变形。计算结果表明:纵骨架式结构外板塑性变形明显低于横骨架式。     

冰区航行船舶推进系统设计的若干考虑

冰区航行船舶由于其特殊的工作环境与气候条件,其设计要求与传统的推进系统有着很大的不同。针对冰区航行条件下船舶推进系统所需要面临的问题,及这些问题所导致的冰区推进系统的特殊性进行了整理和分析,指出了推进系统设计过程中为应对冰区航行条件下的海冰、低温以及空泡噪声等问题所应采取的改进措施,为冰区航行船舶推进系统的设计提供了参考。     

藻菌共生体系对镇江市金山湖湖水的异位修复模拟研究

根据镇江市金山湖湖水的水质配制了模拟湖水,考察了小球藻、栅藻、铜绿微囊藻和聚球藻对模拟湖水中总氮(TN)、总磷(TP)和化学需氧量(COD)的去除效果,筛选出小球藻作为优势藻种.文中研究了小球藻的初始密度对模拟湖水中TN、TP和COD去除效果的影响.结果表明:小球藻初始密度为5×106个/m L时对TN、TP和COD的去除效果相对较好,在72 h内去除率分别可达55.1%,96.2%和55%.文中还对藻菌共生体系修复模拟湖水的效果进行了研究,确定了最佳藻菌体积比为1∶2时,TN,TP和COD的去除率分别达到62.4%,97.2%和96.2%.结果表明:藻菌共生体系可有效地对富营养化湖水进行异位修复.     

破冰型大型航标船线型开发设计及破冰阻力评估研究

结合北海航海保障中心大型航标船的破冰功能需求,为本船选取合理的推进功率,对本船具有破冰功能特点的线型设计进行分析论述,同时运用破冰阻力经验公式对本船在一定冰厚和航速下的破冰阻力进行估算,结合冰池试验结果对破冰阻力数据进行对比分析,并进行冰区航行的快速性评估。     

Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

纳米TiO2光催化和紫外线辐照法相结合杀灭压载水中藻类模拟实验研究

为了验证紫外线处理器内部附着纳米TiO2薄膜,在压载水处理过程中的灭藻效果,设计了一套杀灭压载水中藻类的模拟实验系统。分别用单一紫外线辐照法和纳米TiO2光催化-紫外线辐照相结合法对鱼腥藻进行杀灭实验研究对比。结果表明,两种方法均可完全杀灭压载水中藻类,且在相同实验条件下,利用纳米TiO2光催化-紫外线辐照结合法,只需要4根低压高强紫外线灯管就能达到单一紫外线辐照法6根低压高强紫外线灯管对海藻的灭活效果。在不影响灭活效果的前提下,降低了处理器的功率,可以起到节能的作用。     

Numerical simulation of level ice impact on landing craft bow considering the transverse isotropy of Baltic Sea ice based on XFEM

Ice bending is a major failure mechanism of level ice when ships and marine structures interact with level ice. This paper aims to investigate the ice bending and ice load when level ice collides on ships and marine structures using numerical simulation method, and compare the numerical results with field test. The fracture of ice is simulated with extended finite element method (XFEM), and cohesive zone concept is used to describe the crack propagation. In order to consider the characteristics of S2 columnar ice, a transversely isotropic elastic material model is used for the ice bulk elements, and a transversely isotropic Tsai-Wu failure criterion is adopted to predict the initiation of cracks. A well-controlled field test of a landing craft bow colliding with level ice in Baltic Sea is simulated to verify the numerical scheme. The ice plate's continuous deformation, crack initiation and crack propagation at different impact velocities and angles are simulated and the results are discussed. In the simulation, the bending crack emerges at the midline of the top surface of ice plate, then propagates towards free boundary, and finally a circumferential crack forms. It is found that with the impact velocity increases, the bending load increases and the fracture size (perpendicular distance from the crack to the contact edge) decreases. And as the angle between the landing craft bow and vertical direction increases, the bending load and the fracture size decrease. The simulated results corresponds well with the field test. The competition between the circumferential crack and radial crack is also found in the simulation and will be discussed in this paper. The results show that this method well simulates the bending of level ice and predict the ice load, and provides a good approach for investigating the mechanism of different forms of level ice fracture.     

Short-term statistics of ice loads on ship bow frames in floe ice fields: Full-scale measurements in the Antarctic ocean

Ship operation and ice loading in floe ice fields have received considerable interest during recent years. There have been several numerical simulators developed by different institutes which can simulate ship navigation through floe ice fields and estimate ship performance and local ice loads. However, public data obtained from full-scale measurement covering comprehensively ship performance and ice loads under various ice thicknesses, concentrations and floe sizes are rare. The 2018/19 Antarctic voyage of the Polar Supply and Research Vessel (PSRV) S.A. Agulhas II gathered considerable data of the ship in floe ice fields under various thicknesses, concentrations, and floe sizes. The aim of this paper is to carry out statistical analysis to seek suitable probability distributions which adequately fit the measured ice load and therefore suitable to be used as parent distributions for long-term estimation. For this aim, three categories of probability distributions, namely standard distributions, truncated distributions and mixture distributions are tested. It is found that truncated distributions can fit the load data better than standard distributions bounded at the threshold. In addition, mixture distributions are shown to have promising features, which fit the data well and are able to separate distribution components. Subsequentially, the well-performed distributions are used as parent distributions to make long-term load estimations. The estimation results demonstrate that long-term estimations are sensitive to the selection of parent distribution, which addresses the importance of finding correct distribution to model short-term ice loads. The data of ten selected cases will be published for the use of other researchers.     

渤黄海冰情分析与对策思考

2009年冬季,我国渤海和黄海北部出现近30年同期最为严重的海冰灾害。海冰袭来,沿海大小港口均遭海冰袭击,部分港口被迫封港,海冰对港口设施、海上交通运输和生产作业造成了严重影响。文中分析了渤黄海海冰的特点和影响,并结合我国港口和海上交通运输特点,提出了应对措施和建议。     

冰载荷下船舶螺旋桨强度的有限元分析

论文研究了冰载荷下船舶螺旋桨的强度问题。基于冰载荷经验公式和五种典型计算工况,利用有限元法进行了冰载荷下螺旋桨的强度分析。建立了一种冰/桨叶碰撞计算模型,对碰撞过程中接触力的变化及螺旋桨的动态响应进行了研究。计算结果可供螺旋桨结构设计时参考。