遗传算法在船舶动力机械混合隔振系统优化设计中的应用

阐明了混合隔振问题的实质就是综合被动隔振系统和主动控制系统的多目标联合优化设计.运用子结构导纳综合法分析了应用混合隔振技术的双层隔振系统的功率流传递特性.采用遗传算法对混合隔振系统进行了优化设计,并作了数值仿真.     

水深对船舶运动和波浪载荷的影响

本文利用简单Green函数法计算二维水动力，特切片法用于有限深水中船舶运动和波载的计算。对实船试算了迎浪航行时几种不同航速和水深的组合，计算结果（垂荡和纵摇响应、舯弯矩和钟前1／4船长处剪力）表明水深的显著影响。水深变浅，垂荡和纵摇响应峰值变小，弯矩和剪力变大，航速越大水深的影响越显著。     

基于黄金比例遗传算法的动车组列车节能优化研究

为研究注重最小化能耗的动车组列车运行控制,针对列车单质点模型受力分析不准确问题,提出一种对附加阻力进行处理的多质点方法,进而以多质点模型为基础进行2次优化。为解决遗传算法寻优时容易陷入局部最优的问题,提出一种基于黄金比例遗传算法的优化方法,1次优化通过该算法为列车运行寻求一组满足约束条件的目标速度集合,获得列车节能运行速度曲线。考虑过电分相对列车运行的影响,进行2次优化,将运行区间划分为操纵固定段和操纵可优化段,并通过黄金比例遗传算法搜索出一组操纵可优化段内满意的工况转换点,结合1次优化得到列车最终运行曲线。以兰考南-开封北线路CRH3型动车组为仿真实例,列车运行能耗降低了10.83%,表明所提方法是可行的。     

土石方调配问题双层规划模型及算法研究

研究目的:针对铁路土石方工程中较少考虑对生态环境影响的现状,研究如何构建合理的土石方调配问题模型,实现铁路土石方工程与生态环境的有效协调,减少对生态环境的影响的同时,从而实现土石方工程系统最优的目标。研究结论:根据土石方工程具体特点,系统地描述土石方调配问题,在此基础上兼顾政府监管部门与施工企业双方不同的利益目标,建立土石方调配问题双层规划模型。在双层规划模型中,上层模型为土石方工程系统最优模型,下层模型为土石方调配费用最低模型。计算结果表明:土石方调配问题双层规划模型在减少对保护生态环境影响同时,降低工程建设成本。     

遗传算法在区段站到发线的应用研究

为解决车站到发线的合理运用问题，采用遗传算建立了到发线运用的染色体结构和适应度函数，对这种复杂的非线性组合优化问题进行了仿真。     

基于自适应遗传算法的路堤边坡稳定性分析方法

基于圆弧滑动面假定,提出了一种用自适应遗传算法搜索最危险滑动面及其对应的最小安全系数的新方法。该方法是一种改进的遗传算法,采用自适应求取适值、动态调整交叉率和变异率、自适应区间收缩。自适应遗传算法有效克服了传统方法易陷入局部极小的缺陷,提高了算法的搜索效率、精度和稳定性。     

基于BP网络的球鼻首参数化优化

本文以某集装箱船为研究对象,对降速航行后的球鼻首进行优化。采用Catia建立船体三维模型,为了产生不同形状的球鼻首,选取球鼻特征参数来描述其基本结构;采用拉丁超立方试验抽样方法得到12组不同形状的球鼻首,提出运用非线性拟合能力较强的BP网络构建球鼻首参数和阻力系数之间的关系模型;采用遗传算法对训练后的网络进行极值寻优。结果显示,优化船型的阻力系数显著降低,说明该方法对球鼻首的优化有一定的借鉴意义。     

Liner shipping network design with emission control areas: A genetic algorithm-based approach

To curb emissions, containerized shipping lines face the traditional trade-off between cost and emissions (CO₂ and SO_x) reduction. This paper considers this element in the context of liner service design and proposes a mixed integer linear programming (MILP) model based on a multi-commodity pickup and delivery arc-flow formulation. The objective is to maximize the profit by selecting the ports to be visited, the sequence of port visit, the cargo flows between ports, as well as the number/operating speeds of vessels on each arc of the selected route. The problem also considers that Emission Control Areas (ECAs) exist in the liner network and accounts for the vessel carrying capacity. In addition to using the MILP solver of CPLEX, we develop in the paper a specific genetic algorithm (GA) based heuristic and show that it gives the possibility to reach an optimal solution when solving large size instances.     

技术站间货物列车协同配流方案研究

技术站间货物列车协同作业组织模式，可实现各站获益，整体加强，对提升铁路运输生产效率具有重要意义.本文建立技术站间货物列车协同配流模型.模型以最大化两技术站的正点出发列车数作为目标函数，采用启发式遗传算法进行寻优，得到货物列车解编顺序和配流方案.最后，通过对算例进行实验分析，验证协同配流模型的实用性.结果表明，技术站间协同配流作业明显压缩车辆在站总停留时间，增加了阶段计划内正点出发列车数，进而提高了技术站内线路使用能力.     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.