一种高铁CTC进路数据自动测试方法的设计与实现

调度集中系统与计算机联锁接口中的进路数据的测试存在工作量繁重、耗时长以及人为因素易出错等问题,针对该问题提出一种自动测试方法,可有效的解决进路数据的自动测试及测试结果的自动分析,多条高铁线路实践表明,能显著提高调度集中系统与计算机联锁接口的测试效率及数据正确率,使CTC系统产品更安全可靠。     

The Movingo integrated ticket: seamless connections across the mälardalen region of Sweden

ABSTRACT

The need for improved public transport (PT) ticketing in ever-growing deregulated PT markets has made well-designed integrated ticketing systems a priority area of intervention for PT service providers around the world. Yet, very little practical evidence of its impacts are reported in Sweden and in the world at large. The focus of this study was the impacts of the Movingo integrated ticketing scheme in terms of PT patronage, user satisfaction and the perceived quality of the ticketing set-up. Three travel surveys were conducted along the Stockholm-Uppsala route. Methods including logistic regression and correlated t-tests were used to analyse the samples. The findings suggest that the scheme made rail commuting more attractive resulting in an overall increase of about 24% in ticket sales with 3% – 15% car commuters reporting that they patronised PT services after the project. The scheme also resulted in increased rail commuter satisfaction. The overall perceived quality of the ticketing set-up did not however improve due to interoperability challenges. Service providers’ uncertainty about equitable distribution of revenue among the participating service providers, interoperability challenges and the lack of interest among most of the participating service providers to sell Movingo tickets are some issues to be addressed.     

燃料电池氢喷射器控制技术研究

为满足燃料电池功率需求,实现氢气侧压力平滑控制,提出了一种氢喷射器控制方案。通过周期性控制喷嘴数和peak-hold时间占空比,并采用了调节量屏蔽方法,以提高压力输出调节能力。建立实验系统,写入软件进行控制实验,表明了该方法的可行性。     

泰国三机场高铁列控系统方案研究

对泰国三机场高铁项目的列控系统选择要求进行分析,提出列控系统方案并进行综合比选,最后提出泰国三机场高铁项目的列控系统推荐方案,研究成果可以为海外项目列控系统方案选择提供一定的参考。     

新型明桥面轨枕板式无砟轨道结构参数研究

钢桁梁桥由于其承载性能好和跨越能力较强等优点,在大跨度铁路桥梁中被广泛采用。但大跨度钢桁梁桥具有跨中挠度大、梁端转角大和温度变形敏感等特点,为了减小大跨度钢桁梁桥二期恒载、适应桥梁变形特性,在大跨度钢桁梁桥上采用新型明桥面轨枕板式无砟轨道结构。以南沙港铁路某大跨度钢桁梁桥铺设新型明桥面轨枕板式轨道为背景,采用有限元法建立大跨度钢桁梁桥上轨枕板式无砟轨道结构计算模型,研究了轨枕板结构参数对轨道受力与变形的影响,确定轨道结构的合理尺寸与参数。结果表明:轨枕板的外形尺寸直接影响其受力和变形特征;板下垫层的厚度对垫层的受力特性的影响较大;建议南沙港铁路某大跨度钢桁梁桥上采用具有2组承轨台、宽度为2800 mm的轨枕板,轨枕板厚度为280 mm,板下垫层厚度为120 mm。     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Development and prospects of initial alignment method for strap-down inertial navigation system北大核心CSCD

Initial alignment technology is directly related to the navigation accuracy and startup time of the strap-down inertial navigation system (SINS), and has always been regarded as a challenging focal point in the research field of inertial navigation. This paper makes a comprehensive survey of SINS initial alignment technology, briefly introduces the basic principles of initial alignment without latitude, coarse alignment with known latitude and precise alignment, and points out their advantages, disadvantages and applicable conditions. The research and effects of existing initial alignment error suppression techniques are then analyzed and discussed. Finally, according to the problems of existing initial alignment methods and the development requirements of the carrier, the future research direction of SINS initial alignment technology is predicted. © 2022 Journal of Clinical Hepatology. All rights reserved.     

引水隧洞突涌段变形特征及控制关键技术研究

深埋引水隧洞突泥突水洞段注浆固结圈与初期支护结构作为协同承载结构,其荷载分担与变形控制对结构和施工安全有重要作用。为研究深埋引水隧洞突涌洞段围岩与支护体系稳定性,以滇中引水狮子山隧洞为工程依托,通过现场对围岩-支护监控量测与第二层型钢拱架受力监测,结合施工工况动态分析围岩-支护体系受力与变形,研究总结突涌段施工变形控制关键技术。研究结论:(1)深埋隧洞突涌洞段拱顶累计沉降17.4 mm,达预留值的17%左右;拱肩、拱腰累计收敛106.6 mm、98.1 mm,达预留值100%左右。(2)突涌洞段理论预测极限位移150 mm;现场监测评价设定阈值uo=100 mm,当达到2/3时,应采取加强措施。(3)最佳开挖方法为微台阶法。各级台阶长度控制在3 m左右,按“快挖、快支、快封闭”原则组织施工。(4)超前预支护管棚结构起到提高固结体刚度作用,较固结体提高约13倍。(5)双层支护结构强度、刚度增加,承载能力明显提高,施工安全性也得以提高。     

引汉济渭工程岭北TBM无扩大洞室刀盘边块更换技术

本文以陕西省引汉济渭工程岭北TBM施工段为依托,为解决TBM在狭小空间内较大部件更换维修困难难题,开展大直径TBM刀盘边块在狭小空间内更换技术研究。通过大量研究,创新性提出新刀盘边块更换方法——基坑法,即通过专用设备配合TBM固有性能,在无扩大洞室工况下完成刀盘边块更换。经岭北TBM刀盘边块更换实例证明,此方法操作简单、适用性高,尤其在狭小空间内更具有优越性,且能节省大量维修时间,有效提高施工工效,可为同类TBM施工提供有益借鉴。     

江户时期东渡日本的唐人及其对日本的文化影响——以唐馆为中心

江户时期东渡赴日的唐人以从事贸易活动的唐船商人为主体,他们以唐馆为活动中心,在日本社会通过日常生活和节庆习俗进行着潜移默化的中国文化传播。同时还有为数众多随唐商船同来的高僧、儒士、画家、医者等,以及具有商贸和文化交往双重身份的唐商人,他们通过更广泛的与日本人接触的机会将对日本的文化影响发挥得淋漓尽致。透过对江户时期东渡日本的唐人构成及其在唐馆内外所从事的文化活动的梳理,更可见以人和空间为载体的中国文化对日本文化的影响。