The uplift capacity of single-plate helical pile in shallow dense sand including the influence of installation

The helical pile has been used to resist the tension for a long time. However, the prediction of the uplift capacity of helical piles including the influence of installation is still a challenge in design. Based on the change in stress according to Mohr-Coulomb failure criterion, a simple theoretical method has been developed, which can calculate the uplift capacity of shallow pre-embedded circular plate anchors and the uplift capacity of helical piles installed by torque and compression. In order to analyse the influence of installation process of a single-plate helical pile on its uplift capacity and verify the theoretical model, a series of model tests have been conducted in dense saturated sand. The single-plate helical piles with different out diameters of helixes have been installed with different installation speeds, and then, the single-plate helical piles have been moved up monotonically. The test results show that the installation speed and the size of the out diameter of the helix have significant influence on the uplift capacity of the helical piles, and the results of the theoretical method have a good fit with the test results. Using this simple theoretical method, the designer can easily predict the uplift capacities of helical piles, which includes the influence of installation.     

船用变频器谐波抑制方法的探讨

谐波干扰在船舶电网中危害比较严重,本文从船用变频器谐波产生的原因、谐波抑制方法上进行系统的探讨,提出了可供参考的解决方案。     

基于混沌优化的电力无源滤波器参数设计

针对目前电网谐波治理,考虑到无源滤渡器设计的现状,以及现有优化设计方法中假设条件较多、寻优能力不强等问题,提出了一种无源滤波器的多目标优化设计方法.利用混沌算法,将无源滤波器的初期投资、无功功率补偿、滤波后电网谐波含量作为目标,进行无源滤波器的参数优化设计.实践证明,该方法设计的无源滤波器具有较好的综合性能.     

自适应神经网络用于船舶动力定位系统

船舶动力定位（DP）采用一种控制系统驱动装在船上的侧推器和尾部推进器或者几个全回转的推进器，使船定位在海平面的要求位置上。船受到风、浪及流等海洋环境力的作用时会漂移离开原位置，传统的控制方法是采用PID（比例、积分、微分）反馈控制。顾和李（1994）提出了一种新的基于人工神经网络的控制方法，它具有许多优越性：①一个可随意调节的目标函数以适合不同的需求──定位精度高或节约定位能量后前馈控制并能自适应于不同的环境力变化包括非线性的波浪漂力；本文在目标函数中引入了与速度相关的项，从而提高控制质量。这一方法也可用于自动驾驶船舶沿设定的轨迹航行。计算机模拟结果表明本方法能达到很好的控制效果。     

现代船舶动力定位系统设计

围绕现代动力定位系统的设计问题,讨论系统的构建、数学建模、控制器设计和推力器的推力分配,重点给出了基于扩展Kalman滤波的动力定位LQG控制器设计算法。     

混合型并联有源滤波器的研究

为实现对非线性负载的谐波补偿和电压调节功能,提出了一种混合型并联有源滤波器.综合考虑系统稳定性和谐波补偿效果,采用了反馈加前馈的控制策略,对比研究了系统补偿特性,并讨论了容性和感性无功补偿问题.仿真与试验结果证明了该混合型并联有源滤波器工作的有效性.     

高性能声学通用信号调理器设计

介绍了一种适宜水声接收用的高性能通用信号调理器的设计思路。给出了信号调理器原理框图和电路图，对其中的前置放大器、可编程放大器、混频器、集成有源滤波器、检波器、可编程微控制器等各单元及整体设计方法进行了阐述。     

Second-order perturbation added mass fluctuation on vertical vibration of tension leg platforms

Total motion in waves can be considered as a superposition of the motion of the body in still water and the forces on the restrained body. In this study the effect of added mass fluctuation on vertical vibration of tension leg platforms (TLP) in the case of vibration in still water for both free and forced vibration subjected to axial load at the top of the leg is presented. This effect is more important when the amplitude of vibration is large. Also this is important in fatigue life study of tethers. The structural model used here is very simple. Perturbation method is used to formulate and solve the problem. First- and second-order perturbations are used to solve the free and forced vibrations, respectively.     

基于阻抗匹配平衡变压器和AT供电方式的新型同相牵引供电系统

电气化铁道的牵引供电系统三相严重不平衡，存在大量的谐波和无功，各供电区段需要用分相绝缘器分隔，从而制约了高速、重载铁路的发展。基于阻抗匹配平衡变压器和AT供电方式的新型同相牵引供电系统，不仅可以解决以上问题，还继承了AT供电方式所特有的通信防护效果好、综合经济技术性能优越的特点；同时在有源滤波器的作用下，实现了单台双绕组工作变压器的接线方式，比原系统结线简单、维护方便。文中分析了系统平衡变换原理，讨论了系统的平衡方式、补偿电流检测与有源滤波器控制方法。分析和仿真证实本文提出的平衡方式和检测方法是正确的，同相供电系统方案是可行的。     

接地线对微机继电保护设备的抗扰度影响试验分析

为了提高电子设备电路系统工作的稳定性，同时泄放由静电感应在机箱上积累的电荷，避免电荷积累形成的高压导致设备内部放电而造成干扰，为设备和操作人员提供安全保障，接地是一项极其必要的措施。但在干扰情况下，接地线的接地效果及其对设备的影响到底怎样，还并未做过详细试验。针对与此，对微机继电保护设备采用不同接地线时所能承受的干扰电压进行试验，并总结分析，提出设计及工程人员实际工作中应注意的问题。