新型明桥面轨枕板式无砟轨道结构参数研究

钢桁梁桥由于其承载性能好和跨越能力较强等优点,在大跨度铁路桥梁中被广泛采用。但大跨度钢桁梁桥具有跨中挠度大、梁端转角大和温度变形敏感等特点,为了减小大跨度钢桁梁桥二期恒载、适应桥梁变形特性,在大跨度钢桁梁桥上采用新型明桥面轨枕板式无砟轨道结构。以南沙港铁路某大跨度钢桁梁桥铺设新型明桥面轨枕板式轨道为背景,采用有限元法建立大跨度钢桁梁桥上轨枕板式无砟轨道结构计算模型,研究了轨枕板结构参数对轨道受力与变形的影响,确定轨道结构的合理尺寸与参数。结果表明:轨枕板的外形尺寸直接影响其受力和变形特征;板下垫层的厚度对垫层的受力特性的影响较大;建议南沙港铁路某大跨度钢桁梁桥上采用具有2组承轨台、宽度为2800 mm的轨枕板,轨枕板厚度为280 mm,板下垫层厚度为120 mm。     

突涌地质隧道TSP法弹性参数判识研究

结合云南4座在建高风险隧道典型突涌实例,对不同不良地质发生突涌的地质情况及突涌段落地震波反射法(TSP)的预报成果进行总结,分析各类突涌发生的工程地质条件和地震波反射法物理参数,归纳隧道突涌地质特征,得出大规模突涌时地震波反射法物理参数中纵波速度V_p、横波波速V_s、纵横波速比V_p/V_s和泊松比σ四项参数的判断标准:(1)富水时,V_p/V_s与σ都呈增长趋势,V_p/V_s变化率增长约5%以上,σ变化率增长约10%以上;(2)富水时,V_p/V_s由1.7→2.0变化,σ由0.25→0.3变化;(3)层状裂隙或构造破碎时,V_p均呈下降趋势;(4)存在裂隙及富水通道时,V_s均呈下降趋势;(5)V_p和V_s同时下降时,围岩破碎及地下水发育程度同步上升;(6)V_p上升、V_s下降时,围岩完整程度变化不大,地下水或裂隙发育程度上升。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

新机场管廊基坑邻近高速桥梁基础施工技术研究

新机场高速公路地下综合管廊大部分结构距在建新机场高速公路桥梁较近,基坑开挖过程易导致高速公路桥梁承台及桩侧土体外露,进而导致桥梁基础产生水平变位、不均匀沉降等现象,对高速公路后期运营产生极大的安全隐患。通过3组试验确定最优注浆参数,在管廊基坑开挖过程中对既有高速桥梁基础附近土体进行注浆加固,效果良好;通过对开挖过程中基坑、桥梁基础变形监测数据进行对比分析,对管廊基坑邻近桥梁基础开挖防护施工技术进行总结,为以后同类工程提供借鉴。     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

PHEV能量管理策略研究

针对一款串联型插电式混合动力公交车,文章基于MTLALB建立整车和各部件数值模型。在中国典型城市公交工况下,建立基于全局优化的DP策略,并与CD-CS策略和PMP策略进行能耗对比分析。结果表明:(1)基于CD-CS策略的后期SOC在一定范围内波动,DP策略与PMP策略的SOC轨迹近似呈线性变化。(2)CD-CS策略较DP策略的能耗成本高22.68%,PMP策略比DP策略的能耗成本高0.30%。DP策略与PMP策略可以合理分配能量源,实现全局最优,但DP策略相比PMP策略计算量大。     

抛石基床振夯工艺在重力式码头施工中的应用

针对重力式码头基床抛石中传统的重锤夯实及爆破夯实工艺效率较低、对周边环境影响较大等问题，进行振动夯实的试验和研究。通过典型试验确定振夯基床厚度、夯锤转速、单点振夯时间等施工参数，并分析和检验振夯效果，验证了抛石基床振夯施工工艺的可行性。该工艺可大幅度提高作业效率和夯实质量，为类似工程提供借鉴。     

我国电力机车及动力车通风系统

简要地说明了我国电力机车及动力车通风系统的发展情况，尤其是交流传动技术对我国电力机车及动力车通风系统的发展的重要影响，同时，还详细分析了各种通风方式的特点，为电力机车及动力车通风系统简统化设计提供了多种选择模式。     

受电弓参数测定方法的研究

对单自由度欠阻尼振动特性进行理论推导,得出其一般运动规律,并利用此规律对受电弓参数进行测定。对于框架归算质量的测量,考虑到其结构是一个复杂的空间杆件结构,测量比较困难,于是采用单频稳态正弦激振方法得到其归算质量。     

电力机车车轴热处理工艺的研究

分析了EA4T钢的性质特征以及传统调质处理工艺所存在的问题,系统地研究了正火、淬火及回火工艺对材料的组织及性能的影响规律。通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。