深海变径声阵缆布放回收装置研究

本文提出了基于深海工作站运搭载的变径缆海底布放回收方式，介绍了变径缆海底布放回收装置的主要工作原理和结构组成，完成了布放回收装置主要部套件的设计计算以及和电液控制系统的设计及计算。     

绿色港湾建设

结合国内外10大著名港口实例,从规划设计、结构选型、使用年限确定、旧有建筑物的改造和再利用、提高环保理念和健全法规等方面,论述了＂绿色港湾＂建设的必要性和可行性,以探研绿色港湾建设及其相关概念,并提出建议。可供规划设计人员参考。     

成灌铁路计算机联锁系统的设计与实现

成灌铁路是我国第一条通车运营的市域铁路,联锁系统采用TYJL-ADX型二乘二取二计算机联锁。该系统是在既有结构的基础上,按市域铁路信号系统的技术要求开发完成。介绍了成灌铁路计算机联锁系统的硬件构成,软件的显著特点,新增客运专线信号机点灯控制功能的设计方法,无配线车站控制功能的软件实现等,以及对一次解锁等功能的探讨与研究。     

城市轨道交通快线轮轨侧磨成因及防治

对目前轨道交通快线开通运营后轮轨侧磨情况进行深入调研,对轮轨侧磨的特点、成因进行分析,通过动力仿真计算,对比分析100 km/h轨道交通快线车辆与传统80km/h地铁车辆轮轨侧磨程度的差异,最后针对轨道交通快线的轮轨侧磨问题提出防治措施.     

跃龙门隧道多功能钢拱架安装机快速施工配套技术

隧道施工机械化是我国隧道施工的发展方向。相较于开挖、衬砌机械化的快速发展,钢拱架安装机械化水平存在不足,长期以来较多采用人工作业,施工人员多、劳动强度大、施工效率及安装精度低,同时存在很大的安全隐患。本文通过跃龙门隧道机械化配置配套应用,分析了钢拱架安装机在机械化快速施工体系中的关键作用,并详细介绍了XZGMT411多功能钢拱架安装机相关参数、施工操作要点及注意事项。多功能钢拱架安装机的使用大幅提高了隧道施工效率及施工质量,缩短了施工工期。     

Optimal design of electric vehicle public charging system in an urban network for Greenhouse Gas Emission and cost minimization

In this paper, we address the optimization problem of allocation of Electric Vehicle (EV) public fast charging stations over an urban grid network. The objective is to minimize Greenhouse Gas Emissions (GHG) under multiple constraints including a limited agency budget, accessibility of charging stations in every possible charging request and charging demands during peak hours. Additionally, we address bi-criteria problems to consider user costs as the second objective. A convex parsimonious model that depends on relatively few assumptions and input parameters is proposed and it is shown to be useful for obtaining conceptual insights for high-level planning. In a parametric study using a hypothetical urban network model generated based on realistic parameters, we show that GHG emissions decrease with agency budget, and that the reductions vary depending on multiple factors related to EV market and EV technologies. The optimal solutions found from the bi-criteria problems are shown to be close to the solution minimizing GHG emissions only, meaning that the emission minimizing policy can also minimize user costs.     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.     

海洋石油平台余热利用研究

东海某DPP平台投产近十五年后,出现设备老化、工艺系统处理量发生变化等情况,从而透平电站、热油锅炉和工艺处理系统出现余热,如何减少能源浪费,及时有效回收利用,需要及时解决问题。通过对基础资料分析研究、平台生产实地调研,提出余热利用方案,并进行成本投资/回报比较,最终验证了方案的正确性。     

桅杆雷达承载平台隐身性能分析

目前,在舰船桅杆设计中存在大量外露的雷达承载平台,在桅杆表面形成突出物,可能产生较强的多重反射。本文基于快速多极子法(FMM)和物理光学法(PO)2种电磁散射计算方法,以某桅杆的雷达承载平台为研究对象,对其电磁散射方式进行分析,研究雷达波参数和外形参数对雷达承载平台RCS的影响。结果表明多重反射是其总体RCS的主要反射源,单次反射是RCS峰值的主要来源。雷达波波长越小,总RCS就越大,极化方向对该模型的电磁反射的影响较小。平台侧面的倾角对雷达承载平台的隐身性能影响较大,端面倾角对隐身性能的影响较为有限,底面倾角的增大会降低平台的隐身性。