排序方式: 共有96条查询结果,搜索用时 78 毫秒
1.
介绍了CAD/CAM技术以及如何应用CAD/CAM技术为减摇鳍的设计开发提供更有效的设计平台。 相似文献
2.
输入扰动对波动鳍推进性能影响是一个新兴的研究领域。本文分析了高频率、小幅度和短波长的正弦波形叠加于波动鳍上时对波动鳍推进力的影响。建立运动学模型,利用四面体网格对计算区域进行划分,采用非耦合隐式求解器求解非定常不可压缩N-S方程和连续性方程。给出计算条件,并对算法给予验证。比较等波幅和变波幅两种正弦扰动波形下,波动鳍的无量纲阻力系数、阻力系数均值以及涡量场随周期(0.05 s、0.1 s、0.3 s、0.5 s、0.8 s)、幅度(0.0008 m、0.001 m、0.0015 m)和波长(0.002 m、0.008 m、0.012 m)的变化情况,从涡动力学角度对该影响进行解释。结果显示:输入扰动不仅影响了波动鳍前缘涡的传递,并对波动鳍周边及尾迹区域漩涡数量和强度产生了改变。除在特定条件外,输入扰动对波动鳍推进力产生负面影响,变波幅扰动的影响要大于等波幅情况。该研究可为波动鳍选择合适参数的输入扰动以提高推进力提供参考。 相似文献
3.
4.
大型小水线面双体船纵向运动稳定性及纵向运动分析 总被引:1,自引:0,他引:1
以大型小水线面双体船为研究对象,观察其在静水中的纵向运动稳定性以及根据STF方法结合粘性修正方法预报其在波浪上的纵摇、垂荡运动等。首先根据ROUTH稳定性准则从定性角度观察其稳定性,然后从定量角度进行分析,给出其稳定性运动品质评价指标,并与配置稳定鳍后进行对比。最后给出配置稳定鳍后小水线面双体船的纵向运动预报。 相似文献
5.
运用涡格法(VLM)建立了前后两对鳍与中间舭龙骨构成组合的定常升力的数值计算模型,其中考虑了梢涡和尾涡的分离与卷起、计算结果与文献[1]的试验结果吻合良好。 相似文献
6.
Tsong-Neng Wu Jenhwa Guo Yih-Nan Chen Wen-Ching Chen 《Journal of Marine Science and Technology》1999,4(3):117-122
We have investigated the usefulness of active stabilizing fins to reduce ship pitching under varying forward speeds, and
in varying wave lengths. A 4-m self-propelled model ship and an electrohydraulically driven stabilizing fin system were used
in our experiment. Pitch angles, pitch rates, and ship forward speeds were measured and fed back to a controller to calculate
the deflection angle of the stabilizing fin. The effects of fin nonlinearity on achievable pitch reduction performance are
discussed. It is shown that the desired pitch response can only be achieved when the fin is operated in the linear region.
The overall dynamic response of the ship approaches open-loop behavior when the degree of nonlinearity is high. This simple
analysis of the pitch stablizing system provides basic information to ship designers. Experimental results validate these
design guidelines.
Received for publication on Feb. 12, 1998; accepted on Dec. 8, 1999 相似文献
7.
The airside heat transfer and friction characteristics of seven interrupted fin-and-tube heat exchangers with hydrophilic coating under dehumidifying conditions are experimented. The effects of number of tube rows, fin pitch and inlet relative humidity on airside performance are analyzed. The test results show that the influence of fin pitch on the friction characteristic under dehumidifying conditions is similar to that under dry surface, and the friction factors decrease slightly with the increase of number of tube rows. The heat transfer performance decreases as fin pitch and number of tube rows increases. The heat transfer performance and the friction characteristic are independent of inlet relative humidity. Based on the test results, heat transfer and friction correlations in terms of the Colburn j factor and Fanning f factor, are proposed to describe the airside performance of the interrupted fin geometry with hydrophilic coating under dehumidifying conditions. The correlation of the Colburn j factor gives a mean deviation of 9.7%, while the correlation of the Fanning f factor shows a mean deviation of 7.3%. 相似文献
8.
9.
基于FLUENT的硅油减振器热片散热性能分析 总被引:1,自引:0,他引:1
散热片的散热性能好坏严重影响硅油减振器的使用寿命.利用计算流体力学软件FLUENT,建立了硅油减振器散热片的三维模型,模型中将热场与流场进行了耦合;通过对散热片表面的温度分布特性、空气流动特性和散热率进行数值模拟,研究分析了散热片不同结构型式对其散热性能的影响.本文的分析方法可用于指导硅油减振器散热片的设计和选型. 相似文献
10.
结合某内河推轮的模型,初步研究了舵附推力鳍在导管桨推轮上应用的可能性及其安装等有关问题,为舵附推力鳍在导管桨推轮上的应用提供参考资料。 相似文献