基于线性叠加的智能船舶经济性评估模型构建

经济性是智能船舶能否实现推广应用的关键,目前国内外有关智能船舶经济性分析的研究较少。本文通过对传统船舶经济性分析方法进行修正优化,提出智能船舶经济性分析计算模型,并根据理论推导结果,得出智能船舶经济性分析的线性叠加简化模型,并利用40万吨级VLOC实际运营数据进行科学性检验。本文提出的模型与方法适用于各类智能模块加装情况下的经济性核算,为相关单位开展智能船舶经济性快速分析提供了理论支持和解决方案。     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

面向新型混合交通流的智能交叉口网络布局优化

考虑网联自动驾驶车辆(Connected Autonomous Vehicle, CAV)应用先进的车联网与自动驾驶技术，可以采用智能交叉口的组织形式，大幅提升交叉口的通行效率，为降低CAV与人工驾驶车辆(Human-driven Vehicle, HV)混行条件下城市交通系统的整体出行成本，提出智能交叉口在城 市交通网络中的布局优化问题，建立数学优化模型并求解。首先，基于对两类车辆行驶特性的分析，建立混合用户均衡模型，描述CAV与HV的路径选择行为；其次，从交通规划者的角度，以系统最优为目标，整合混合用户均衡模型，建立面向新型混合交通流的智能交叉口网络布局优化模型，并利用改进的遗传算法求解；最后，选取Sioux-Falls交通网络作为案例分析，验证模型与算法的有效性，并研究CAV渗透率变化对优化结果的影响。研究表明，智能交叉口在城市路网中的合理规划极大地提高了新型混行场景下城市交通系统的出行效率，同时，大幅降低了由于网联自动 驾驶单方面技术优势带来的CAV与HV的出行效率差距，增进了出行公平性。     

基于车辆自动定位数据的有轨电车运行效率分析与应用

结合有轨电车线路的现有车辆自动定位数据,分析有轨电车运行效率及其相关影响因素。其中,影响因素从站台、路段、交叉口3个方面进行考虑。定性分析了不同站台型式、站台位置、交叉口类型的属性特征,并量化不同路段的路段长度、所包含的交叉口个数,同时考虑了交叉口控制策略对有轨电车运行时间的影响。以某已运营的有轨电车线路为例,通过建立多元线性回归模型,从不同层面探究不同因素对已运营有轨电车线路运行效率的影响。最后用模型对有轨电车新建线路的运行效率进行预测,并提出建议。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

列车通信网络研究现状及展望

介绍了列车通信网络的主要任务和列车通信网络的拓扑结构,阐述了列车通信网络(TCN)的发展历程及目前国内外列车通信网络的发展现状,并展望了列车通信网络技术的发展趋势。     

船舶除锈机器人驱动系统设计

介绍了应用在船舶除锈的磁吸附爬壁机器人本体驱动系统的设计,着重阐述了系统的驱动原理和驱动电路。系统以89c51单片机为核心,通过键盘以及通信接口可以方便的控制步进电机带动机器人本体运动,充分发挥了单片机的优势。实验表明,系统电路设计合理,简单实用。     

摩擦焊接工艺在全浮式汽车半轴制造中的应用

介绍了国内汽车半轴生产所采用的三种型式——锻造式半轴、分体式半轴及摩擦焊接式半轴。对摩擦焊接式半轴的生产工艺、摩擦焊接结合机理、生产设备及应用特点等作了介绍，为我国中小型汽车企业在工艺水平方面提供借鉴。     

电机悬挂方式对LIM地铁系统动力特性的影响研究

研究目的：研究直线电机地铁在不同电机悬挂方式下的气隙变化规律及车辆、轨道的动力响应特性，并将二者进行比较。研究方法：应用车辆轨道耦合动力学理论，分别建立不同悬挂方式下的系统模型并编制相应的仿真程序，通过在轨道局部加入谐波型余弦不平顺激励对系统的动力特性进行分析。研究结果：2种悬挂方式对系统的各向加速度和轮轨力的影响差别较小，而气隙变化呈现明显不同的规律。研究结论：直线电机采用架悬式悬挂时，要严格控制幅值大于5．5mm的长波不平顺，防止电机和反力板之问的刮蹭；而当采用抱轴式悬挂时，要注意控制大幅值的短波不平顺出现，防止气隙过大，影响电机效率。