苏通长江大桥4号主墩钢吊箱设计

苏通长江公路大桥4号主墩钢吊箱是目前世界桥梁建筑中采用规模最大的施工设施。阐述了4号主墩钢吊箱设计理念,确定分析了首节吊箱的起吊、吊箱整体下沉定位、浇筑水下砼封底、吊箱内抽水及承台砼浇筑等主要工况,并采用了信息化施工等先进技术。使用及现场实例结果说明钢吊箱的结构设计是十分成功的。     

施工导流在内河航道干地开挖工程中的应用

通过施工导流在内河航道干地开挖施工中的应用，结合内河航道干地开挖的具体特点，分析影响施工导流成败的主要因素．介绍了在施工中应注意的主要技术要点。     

混凝土搅拌运输车主、副车架的设计

对混凝土搅拌运输车的主、副车架进行了定性和定量的受力分析,从中推导出主、副车架的简化强度计算方法和强度校核公式。并以SX5254GJBDM364混凝土搅拌运输车为例进行了实例分析和计算。     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

船舶主机冷却水系统的建模与节能型控制研究

在对船舶主机高温淡水冷却水系统的各主要器件建立各自的数学模型的基础上,对其整个系统建立了数学模型.然后以主机高温淡水冷却水系统作为研究对象,提出了在此系统中采用神经元自适应控制方式替代传统的PID(比例积分微分)控制方式进行水温调节,以达到改善控制并节约能源的目的.最后以仿真结果说明了神经元自适应控制方式具有良好的适应性与抗干扰性,它比PID控制方式更适用于主机冷却水温度调节系统.     

和谐HX_D1型大功率交流电力机车电传动系统

详细介绍HXD1型大功率交流电力机车主电路和辅助电路的结构组成、工作原理、技术基础、冗余设计理念以及故障保护机理与实施情况。     

基于沥青路面施工质量的设备合理匹配技术研究

现代高速公路施工不仅要以大规模机械化为基础,而且各机型之间需协调工作,形成与路面材料特性相适应的有机整体。通过对高速公路设备组成中核心设备的作业性能分析和试验研究,得出了摊铺机的合理作业工况,提出了以保证和提高路面施工质量为基础的施工机群合理匹配理论,并对核心设备、主要设备和辅助设备的合理配置进行了分析,给出了计算公式。     

异地协同设计在勘察设计中的应用

本文以铁三院为例,对异地勘察设计作业模式从“现场设计”发展到“异地协同设计”的实践、存在的问题及解决方法进行了分析。文中提到的部分方法已经在铁三院生产、管理中得到应用,并取得了较好的效果;对需进一步改进的问题也提出了解决方案。     

LTS2000装置在哈大线牵引变电所的应用

介绍了哈大线牵引变电所当地综合自动化控制系统中变电所220 kV侧系统自动转换、接触网线路自动检测和变电所馈线反向电压自动检测3种自动控制功能,分析了其基本原理、工作过程及应用情况和取得的效益.