西班牙Velaro E高速列车的电气设备

西班牙铁路(RENFE)从2004年起将获得16组Velare E电动车组.这些电动车组是按欧洲铁路通用性规定设计的目前世界上最现代的高速列组.在最大坡道为25‰和海拔高1 200 m的线路上列车要以350 km/h高速运行,对其电气设备提出了很高要求.文章详细介绍了设计和实现这些电气系统及部件时必须重视和满足的要求.     

城市轨道交通BIM项目协同平台应用研究

从轨道交通项目实际应用需求出发,设计BIM项目协同平台的网络架构以及各大功能模块,包括文档管理模块、流程管理模块、设施设备构件库模块以及数据校验模块,并依托上海市轨道交通在建项目,验证平台应用的可行性及价值,提高轨道交通项目建设管理的质量和效率。     

地铁站台门系统设备健康管理研究与应用

综合研究地铁机电设备运行特性,实现从被动故障修和计划修向主动智能状态修的跨越。提出一种地铁机电设备健康管理评价方法,通过失效实验验证机电设备状态量的门槛阈值,利用数学模型对设备状态进行量化,并基于状态量健康指标评判设备状态的优劣。在此基础上,运用MATLAB拟合时间与设备健康指数之间的非线性关系模型,求解并预测设备健康状态及维护时间节点,对科学规划设备检修周期、提前预判设备状态具有重要的理论及实践指导意义。研制设备状态量智能采集装置,通过上位机实时计算验证、预判,并在郑州地铁1号线进行充分验证,达到预期效果。     

低阻通风船体的远程控制测试平台开发（英文）

This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept’s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.     

Application of H infinite control to ship steering system

1Introduction Whensailinginwaves,thestateofshipsteeringisina constantdirectionmostly.Intheconditionofexisting thedisturbanceofwave,windandflow,theship shouldkeepacertainheadingprecisionunderthecon trolofauto pilot.Alongwiththevariationofshipload condition…     

CATIA V5船舶解决方案在管舾装领域的应有——广州文冲船厂有限责任公司应用CATIA V5成功案例

引言 随着国际造船市场竞争的激烈和船东对船舶各方面的要求越来越高,国内造船企业在船舶质量、成本、周期等方面面临着更多的挑战,必须在造船经营、造船技术(设计、生产、管理)方面做出卓越的工作,才能取得效益.     

多目标进化算法在船型方案设计中的应用

针对船型方案设计阶段主尺度确定的优化问题,采用现代多目标进化算法进行研究.考虑某水面船排水量和航速两个优化目标的算例,给出了Pareto最优解集,并和实际船型进行了比较.算例表明,多目标进化算法能够快速获得最优解集,该解集分布均匀,可以供实际设计采用.     

深海水下装备吊放系统缆索动态响应特征

介绍了海上作业的笼置ROV系统缆索的运动和张力测量.系统呈弱非线性,垂向的中继站运动比母船的运动大得多,系统作业并非远离其固有频率.此外,根据记录下来的几个突变载荷对导致缆索过早失效的机制提供了一些有意义的看法.这些数据支持了中继站的主要运动发生在垂直方向上,且一维模型足以预报中继站运动的假定.     

高频感应热源应用于水火弯板工艺的可行性研究(英文)

The purpose of this paper is to investigate the feasibility of high-frequency induction heat for the line heating process through a series of experimental studies and numerical calculations. The results show that the heating temperature of induction heating meets the demands of steel plate bending, and the deformation of a steel plate heated by induction heating can achieve the same effect as flame heating. Meanwhile, the finite element model of moving induction heating of the plate is developed, and the comparison of the residual strain fields and transverse shrinkage between these two kinds of heating shows that great similarity has been achieved.     

HTK-196型车号自动识别系统故障快速诊断仪

针对HTK-196型车号自动识别系统故障模块进行分析诊断,找出故障并分析故障原因,将结果和维修处理意见显示在屏幕上