涡轮机械用行星齿轮增速减速器

1.导言近年来,装置的发展趋势为小型轻量化,因此涡轮机械也逐年趋于高速。随着涡轮机械的高速化,要求增速减速器所用的齿轮周速日益增高,这就产生了各种各样的困难和问题。与平行轴齿轮相比,行星齿轮增速减速器的结构更紧凑,相对周速更小,由于这些优点,对其在涡轮机械上的应用进行了开发。在涡轮机械上应用行星齿轮的例子很多。如在以燃气轮机、膨胀涡轮机、蒸汽轮机作为驱动源的发电机上行星齿轮是用来作为减速器,而以电动机为驱动源的压缩机上则用来作为增     

风船技术公司展示有关零排放的“海洋特斯拉”船舶设计项目

风船技术公司(Windship Technology)推出了其零排放船舶设计,"基本上是一个‘海洋特斯拉'航运解决方案。"其组合了大型太阳能电池板、碳捕获、优化的船体形状和专门的气象定线软件。该48 m风船技术成套设备可装载在甲板上,以帮助港口导航和货物装卸。其复合结构是由风力涡轮机行业的技术和设计所证实,并具有25年以上使用寿命。     

轴流式涡轮机动叶片的叶顶间隙对其气动性能影响

采用数值方法对不同叶顶间隙下某型号船用轴流式涡轮机的气动性能进行了对比分析.结果表明,叶顶间隙对喷嘴环前缘的压力分布和涡轮内的温度分布影响明显,过小和过大的叶顶间隙都会导致喷嘴环前缘高压力区的产生,并导致涡轮内局部高温度区域扩大;随着叶顶间隙的增大,喷嘴环后缘底部、吸力面及叶顶间隙内局部高熵区随之增大,燃气能量损失增大.     

DNV推出世界上首个针对海上风电局轮机机组装置的入级符号

随着海上风电领域的快速发展，风电涡轮机机组装置的市场也日益发展壮大。这些装置的入级以DNV海上设施服务规范DNVOSS·101“海上钻井和支持装置的入级规范”，原先是为油气行业的钻井和采油船舶的入级服务而制定的。     

GE公司LM2500＋型燃气涡轮发动机为美国两栖攻击舰提供动力

据海军日报网站报道，通用电气公司海军事业部混合燃料推进处宣称他们的LM2500＋型燃气涡轮机被诺·格造船厂（NGSB）采用，为美国海军LHA6两栖攻击舰提供动力。     

卡特彼勒：用实力成就未来——访卡特彼勒公司全球铁路副总裁Chuck Wills先生

作为工程机械业巨头，美国卡特彼勒公司已经有80多年的历史，通过不懈努力，其业务已遍及各大洲，卡特彼勒公司始终致力于带来进步及推动积极和可持续的改变。2007年公司销售收入达450亿美元，是世界上最大的建筑和采矿设备、柴油和天然气发动机以及工业气体涡轮机制造商之一。同时该公司还是领先的服务提供商，     

Study of steady and unsteady wet steam condensing flows in a turbine stage

Objective To develop the numerical method for the steady and unsteady wet steam condensing flow in turbine stage. Methods An Eulerian/Eulerian numerical model is used to describe the spontaneous condensation flow in the steam turbine. For the steady condensing flow computations, the mixing plane model was used. For the unsteady condensing flow computations, the sliding mesh method was used to simulate the rotor-stator interactions. Results The numerical results showed the obvious differences between non-condensing and condensing flows. The results also showed the unsteadiness effect due to rotor-stator interactions had a deep influence on the formation and growth process of water droplets. Conclusion The numerical methods presented in this paper are valid for the condensing flow in the turbine stage.     

Geometrical design of blade＇s surface and boundary control of Navier-Stokes equations

In this article a new principle of geometric design for blade＇s surface of an impeller is provided. This is an optimal control problem for the boundary geometric shape of flow and the control variable is the surface of the blade. We give a minimal functional depending on the geometry of the blade＇s surface and such that the flow＇s loss achieves minimum. The existence of the solution of the optimal control problem is proved and the Euler-Lagrange equations for the surface of the blade are derived. In addition, under a new curvilinear coordinate system, the flow domain between the two blades becomes a fixed hexahedron, and the surface as a mapping from a bounded domain in R2 into R3 , is explicitly appearing in the objective functional. The Navier-Stokes equations, which include the mapping in their coefficients, can be computed by using operator splitting algorithm. Furthermore, derivatives of the solution of Navier- Stokes equations with respect to the mapping satisfy linearized Navier-Stokes equations which can be solved by using operator splitting algorithms too. Hence, a conjugate gradient method can be used to solve the optimal control problem.     

恒温热源条件下实际回热式布雷顿循环的功率密度特性

用有限时间热力学方法分析恒温热源条件下实际回热式布畦顿循环的功率密度特性,计入工质与高,低温侧换热器的热阻损失,压气机,涡轮机的不可逆压缩和膨胀损失,以及管路系统中的压力损失,导出了功率密度与压比间的解析式,并通过数值计算将对应于最大功率密度时的一些参数与对应于最大功率时的同样参数进行了比较。     

Stena Bulk公司披露其零碳型船舶设计理念

Stena Bulk公司透露了InfinityMAX混合散货船设计理念,针对零碳、多式联运船舶设计.该InfinityMAX 概念设计用于在模块化舱室中载运干货和湿货,以几个新的核心原则建造.