A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

三峡船闸(139m水位)一闸室船舶待闸研究

通过优化三峡船闸输水阀门运行参数,满足了船舶在一闸室待闸的停泊条件;组织代表船型进行实船试验,形成了连续调度快速安全的调度工艺,取得了在139m水位条件下,三峡船闸下行通航效率提高15%的效果。     

汽车动力总成弯曲振动应力响应及其激励灵敏度分析

本文利用文献（５）建立的汽车动力总成弯曲有限元分析模型，计算分析离合器壳的动应力响应，并考察了动应力关于不平衡质量位置的灵敏度，对计算分析进行了实验验证。     

基于结构疲劳动态可靠性分析的船舶结构概率损伤容限设计

本文根据结构可靠性理论，提出了一种基于结构疲劳动态可靠性分析的损伤容限分析方法，给出结构疲劳裂纹随机扩展过程中疲劳寿命分布和结构疲劳可靠性的表达式。在给定与疲劳寿命有关的各参数条件下求得动态可靠性曲线，从而在结构设计中根据可靠性要求确定或选择设计参数。     

机车车辆动力学研究及发展

机车车辆动力学在最近10年得到迅速发展,考虑车辆—轨道耦合作用的耦合模型得到广泛应用。随着大跨距跨江铁路桥的建设,车和桥的耦合振动会引起接触网的振动,进而影响弓网的耦合振动。因此十分有必要开展接触网—受电弓—机车车辆—线路—桥梁耦合大系统动力学的研究。进行机车车辆动力学性能优化,必须首先确定机车车辆动力学三要素的优先关系,即运行的稳定性—安全性—平稳性,建立以列车为研究对象的模型,同时在模型中考虑机车车辆结构弹性和频变特征悬挂参数以及气流扰动的影响,进而进行灵敏度分析和参数优化。给出考虑频变特性的钢弹簧等效计算方法以及基于循环变量的列车系统动力学建模和计算方法,并验证了计算方法的有效性。     

黄土湿化特性的三轴试验研究

研究目的：本文旨在通过三轴试验，研究黄土湿化应力应变关系、强度特征及影响因素。 研究方法：通过等围压固结湿化试验和三轴剪切湿化试验进行研究。 研究结果：获得不同围压条件下固结湿化变形随时间变化规律，初始含水量、压实度的影响规律；获得不同应力水平下湿化应力应变关系、剪切湿化变形规律以及湿化对强度的影响等成果。 研究结论：（1）湿化变形受初始含水量及压实度的影响很大；（2）湿化条件与不浸水条件下，应力一应变关系均表现为应变硬化特性；（3）剪切湿化体积变形随应力水平的增加而减小，轴向变形随应力水平的增大而增大；在同一应力水平下，体积变形与轴向变形均随平均主应力的增大而减小；（4）湿化不仅降低了黄土的强度，也降低了黄土达到破坏时的应变。     

自适应神经网络用于船舶动力定位系统

船舶动力定位（DP）采用一种控制系统驱动装在船上的侧推器和尾部推进器或者几个全回转的推进器，使船定位在海平面的要求位置上。船受到风、浪及流等海洋环境力的作用时会漂移离开原位置，传统的控制方法是采用PID（比例、积分、微分）反馈控制。顾和李（1994）提出了一种新的基于人工神经网络的控制方法，它具有许多优越性：①一个可随意调节的目标函数以适合不同的需求──定位精度高或节约定位能量后前馈控制并能自适应于不同的环境力变化包括非线性的波浪漂力；本文在目标函数中引入了与速度相关的项，从而提高控制质量。这一方法也可用于自动驾驶船舶沿设定的轨迹航行。计算机模拟结果表明本方法能达到很好的控制效果。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

用PROLOG语言在第五代计算机中实现三种同步机制

以日本新一代计算机技术研究所研制的个人顺序推理机ＰＳＩ为模型，详细讨论了用ＰＲＯＬＯＧ语言在新一代计算机操作系统中实现忙式等待、信号灯、条件临界区三种同步机制的情况，并进行了评价，软件模拟程序已在微机上调试通过。     

模糊数据融合技术在柴油机状态监测中的应用研究

针对传统柴油机状态监测的不足,采用模糊数据融合的方法,对多传感器测得的数据进行融合处理,实现柴油机故障的预警及柴油机状态的监测。