钢管桩与混凝土芯粘结力及抗弯应力传递模拟试验研究

依托深圳蛇口集装箱码头二期工程,进行了钢管桩与混凝土芯粘结力及抗弯应力传递模拟试验,对试验结果进行理论分析,讨论了不同搭接长度和不同UEA掺量对钢管桩与混凝土芯单位粘结力的影响;推导出纯弯矩作用下,混凝土芯与钢管粘结段粘结长度的计算公式。为类似工程提供方法指导和理论依据。     

采用喷风冷却工艺提高淬火钢轨性能的研究

钢轨喷风淬火工艺采用单一的冷却介质压缩空气,使淬火冷却均匀性得到提高,而且不受钢轨表面状态对淬火质量的影响,便于生产管理。由于在冷却装置中加入侧面喷风冷却,淬火硬度分布更合理,有利于提高淬火钢轨抗侧磨能力。线路铺设使用也表明,喷风淬火钢轨比喷雾淬火钢轨具有更好的抗剥离性。根据目前国内淬火线生产状况,提出调整钢轨的成分和采用喷风冷却工艺是当前迫切需要解决的问题。     

GM(1,1)模型与指数模型在基桩沉降预测中的应用

以某大型基桩的沉降预测为例,利用灰色系统理论的GM(1,1)与Aeax曲线模型进行基桩在外荷载作用下沉降量的预测。结果表明:两种模型对于呈指数变化规律的系统能获得较好的预测结果;两种模型对基桩累计沉降的预测符合工程实际,对各级荷载作用下的本级沉降预测不够合理。对两种模型关系的研究表明,两者有内在联系,都属指数曲线预测模型,且指数曲线Aeax预测模型比GM(1,1)模型应用起来更简单,方便。     

溶洞地质条件下钻孔灌注桩的施工方法

着重介绍了在溶洞地质条件下钻孔灌注桩的施工方法.     

铁路基桩反射波法完整性检测应用探讨

对使用反射波法检测铁路大直径基桩完整性时,其反射波曲线中浅部会产生1个正向缺陷信号的问题作了详细探讨。经分析,它是由于基桩在冲击成孔或人工挖孔施工中,其桩顶砂浆没有清理干净和人工挖孔桩护壁等原因引起的。所以,在采用反射波法检测基桩完整性时,其桩顶砂浆要清理干净,且露出含有粗细骨料均匀致密呈青色的混凝土新表面,而对于人工挖孔桩的护壁影响因素可在桩体混凝土强度达到设计强度95%时进行检测。这样,就能够消除反射波曲线中浅部的正向缺陷信号,以便正确判定基桩完整性。     

功率循环测试中衬底焊接层的可靠性

基板与陶瓷衬底之间的焊层寿命通常利用IGBT模块的被动加热和冷却(热循环)来测试,但这种试验会引起焊层失效(分层)。实际应用中,IGBT和二极管芯片是主动被加热的,诸如焊线脱落等其它模式的失效也会限制使用寿命,通常可通过功率循环试验来评估这种应力的影响。本文通过功率循环试验来评估衬底焊层的失效,利用高循环周次的测试进行有效的衬底焊层热循环试验,其关键在于功率循环过程中焊层温度的预测。在温度波动不大的条件下,比较了被动热循环和主动功率循环时对焊接寿命的影响。     

城市轨道交通车辆受电弓弓头安全宽度的计算

分析了城市轨道交通车辆在直线段和曲线段中受电弓弓头的偏移影响因素以及接触线的受风偏移现象.根据比较车辆处于直线段和曲线段时的受电弓与接触线之间相对距离来确定受电弓弓头宽度的合理安全宽度,并设计了“城市轨道交通车辆受电弓宽度参数计算软件”.     

昔格达地层泥质粉砂岩灌注桩承载性状试验研究

西攀路昔格达地层分布广泛,桥位桩桩基大多数置于昔格达地层中,该桩基承载性状研究资料缺乏,根据对西攀路安宁河蒲坝工点试验段4根灌注桩的现场静载试验结果分析,揭示了昔格达地层灌注桩承载特性和荷载传递机理,得出了昔格达地层泥质粉砂岩的侧摩阻力、桩端阻力及桩尖容许承载力。     

Dynamic stride length adaptation according to utility and personal space

Pedestrians adjust both speed and stride length when they navigate difficult situations such as tight corners or dense crowds. They try to avoid collisions and to preserve their personal space. State-of-the-art pedestrian motion models automatically reduce speed in dense crowds simply because there is no space where the pedestrians could go. The stride length and its correct adaptation, however, are rarely considered. This leads to artefacts that impact macroscopic observation parameters such as densities in front of bottlenecks and, through this, flow. Hence modelling stride adaptation is important to increase the predictive power of pedestrian models. To achieve this we reformulate the problem as an optimisation problem on a disk around the pedestrian. Each pedestrian seeks the position that is most attractive in a sense of balanced goals between the search for targets, the need for individual space and the need to keep a distance from obstacles. The need for space is modelled according to findings from psychology defining zones around a person that, when invaded, cause unease. The result is a fully automatic adjustment that allows calibration through meaningful social parameters and that gives visually natural results with an excellent fit to measured experimental data.     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.