VxWorks下显卡(69030/815)高分辨率与双屏驱动程序的开发

对VxWorks下图形驱动ML3．0进行了比较深入的研究，在此基础上提高了Chips 69030显卡和Intel 815显卡在VxWorks下图形驱动的分辨率，并实现了在VxWorks下Chips 69030显卡和Intel 815显卡双屏驱动的开发，具有较高的实用价值。     

电控发动机工况实时模拟系统的研制

本文介绍了电控发动机工况实时模拟系统的研制，试验与实际应用证明该系统具有工作稳定，运用可靠等特点，在发动机电控系统开发工作中，该系统是十分有用的工具。     

A real-time adaptive signal control in a connected vehicle environment

The state of the practice traffic signal control strategies mainly rely on infrastructure based vehicle detector data as the input for the control logic. The infrastructure based detectors are generally point detectors which cannot directly provide measurement of vehicle location and speed. With the advances in wireless communication technology, vehicles are able to communicate with each other and with the infrastructure in the emerging connected vehicle system. Data collected from connected vehicles provides a much more complete picture of the traffic states near an intersection and can be utilized for signal control. This paper presents a real-time adaptive signal phase allocation algorithm using connected vehicle data. The proposed algorithm optimizes the phase sequence and duration by solving a two-level optimization problem. Two objective functions are considered: minimization of total vehicle delay and minimization of queue length. Due to the low penetration rate of the connected vehicles, an algorithm that estimates the states of unequipped vehicle based on connected vehicle data is developed to construct a complete arrival table for the phase allocation algorithm. A real-world intersection is modeled in VISSIM to validate the algorithms. Results with a variety of connected vehicle market penetration rates and demand levels are compared to well-tuned fully actuated control. In general, the proposed control algorithm outperforms actuated control by reducing total delay by as much as 16.33% in a high penetration rate case and similar delay in a low penetration rate case. Different objective functions result in different behaviors of signal timing. The minimization of total vehicle delay usually generates lower total vehicle delay, while minimization of queue length serves all phases in a more balanced way.     

基于MSC与UPPAAL的高铁跨界临时限速建模与验证

临时限速服务器是高铁列控系统的重要组成部分,其不仅要校验CTC下发的临时限速命令,还要与相邻调度台临时限速服务器之间进行频繁的信息交互,因此对其安全性和实时性要求也更苛刻。为了满足高铁列控系统对其运行的要求,采用时间自动机理论和消息顺序图(MSC)相结合的方法,首先建立跨界临时限速命令的MSC模型和时间自动机子模型,再利用UPPAAL验证工具对形式化语法BNF描述的时间自动机子模型属性进行验证。根据仿真验证结果确认了跨界临时限速信息的安全性和受限活性,为进一步开发临时限速服务器功能提供了重要的依据。     

快速处理倒车影像的设计研究与实现

详细分析当前基于Android系统的车载中控和智能后视镜倒车影像显示系统在系统启动阶段显示慢的问题,如果驾驶员强行倒车可能会带来安全隐患,以及双系统的处理方案成本高,市场接受度不高。通过深入分析车载中控和智能后视镜的Android系统启动流程,提出了一种在U-boot中处理倒车影像显示的解决方案,可以快速处理倒车影像显示,从系统上电到显示倒车画面在2.5s左右完成,非常迅速,也充分考虑了在U-boot过了倒车检测点到内核启动完成具备倒车显示功能时这段盲区的处理方案,充分保障了启动阶段能够快速处理倒车影像显示的功能。该设计不增加硬件成本,经济性好,便于普及。     

汽车全液晶车速里程表研制

介绍了以MC68HC9S12DP256为控制芯片,基于PCF8533液晶驱动芯片的全数字式液晶车速里程表,实现了系统的低功耗和直观良好的显示界面。     

考虑实时浮态调整的散货船分舱优化

以某散货船为例,在船舶主尺度、船型参数和货舱总长度不变的情况下,将货舱间横舱壁的偏移距离作为优化参数,以船舶静水弯矩和静水剪力为目标函数进行优化,寻求使船舶静水载荷达到最小的横舱壁组合,并针对货物随着舱壁位置不同而引起的浮态变化,编写实时调整压载水的程序。该程序可应用在散货船的初步设计中,对船舶分舱设计和配载布置都具有指导性的意义。     

用SPC统计技术控制机车弯管质量

介绍了一种预防机车管道弯制质量问题的方法。用SPC统计技术中的Xbar—R图对管道弯制角度进行现场控制,可以及时发现异常,在质量问题发生之前采取措施,减少质量事故。     

基于HLA的虚拟海战场电磁环境仿真系统研究

针对虚拟海战场电磁环境仿真分系统的实际需求对仿真系统的硬件环境、软件环境、系统结构进行了分析研究,基于高层体系结构(HLA)具体设计和实现了相应的仿真系统。仿真实验表明,该仿真系统产生的作战想定和电磁环境能够满足海战场仿真系统的要求,具有实用价值。     

显示技术在军事领域的应用与发展

从早期的CRT显示器到现在的平板显示器的广泛商用,以及随着技术的发展和材料的成熟、成本的降低,显示技术现在正逐步转换到军事应用。阐述了柔性显示技术的研究发展,并预测柔性显示技术也将随着技术的日趋成熟在军用领域中衍生出多种方式的应用。