边际油田-WZ11—1N开发的工程策略

讨论了北部湾边际油田-WZ11-1N油田开发的工程策略，通过技术和经济上的综合分析，WZ11-1N油田采用了“三一”模式依托开发的成果，在应用涠洲地区成熟的、较先进的工程技术和开发经验的基础上，对依托平台／管线的处理工艺和寿命进行了详细的优化和校核，同时采用了电力组网新技术，达到了降低工程投资，提高油田收益的目的。另外在总体布置上为未来油田的依托开发预留了空间。     

PCB生产中碱性蚀刻液补加工艺

从碱性蚀刻的化学反应机理出发,分析影响蚀刻精度的诸多因素,总结常规的蚀刻液补加工艺,提出了新的蚀刻液补加思路,并在实际生产中取得一定的效果.     

阿尔斯通开发的PRIMA 3U15型电力机车

阿尔斯通公司运输部开发了PRIMATM机车系列,其类型满足了运营部门提出的模块化和系列化要求.投放欧洲市场的PRIMA型电力机车既满足了通用性要求,又有助于与公路的经济竞争取得成效.为此,阿尔斯通公司继法国双流制机车后又开发了一种三流制机车,该型机车可用于法国、德国和瑞士之间的跨境运输.文章介绍PRIMATM系列的开发过程以及得到法国国家铁路的订单.详细叙述了PRIMA 3U15型三流制机车,重点是PRIMA电力机车的维修、可靠性和可用性.     

Effects of Vitamin E and Selenium on Free Radicals Metabolism of Broilers

Since Haman (1982) firstly postulated freeradical theory, the metabolisms and functions offree radicals in animal organisms has arouse greatconcerns in the biology research field. In the pro-cedure of normal organism material metabolism,there exists dynamic balance among the producing,utilizing and clearing of free radical. VE is an im-portant antioxidant in the organism and breaksperoxidation of lipids associated with vitamin C(VC)[1,2]. Selenium (Se), as part of the active siteof GSH-Px[…     

基于Pro/E的绞刀三维造型

根据挖泥船绞刀结构特点,利用Pro／E中加厚、变截面扫描等丰富的造型功能实现了绞刀三维造型,为后续的刚度、强度分析、流场计算、NC加工等做了很好的铺垫。     

E2地震作用下减隔振桥梁的抗震设计

以某减隔振桥梁为例,建立该桥的三维有限元模型,考虑桩-土相互作用的影响,并根据混凝土和钢筋的材料特性,选取适宜的动力弹塑性本构模型,同时模拟了弹塑性减隔振球型钢支座,并采用人工拟合的3条地震动时程曲线对该桥进行了E2地震作用下的弹塑性时程分析,验算该桥在E2地震作用下的强度及变形。经过详细的验算与分析,验证了本桥设计的安全性和可靠性,并为实际工程中的非规则桥梁在E2地震作用下的抗震验算提供参考依据。     

相继增压系统对改善船用直列八缸发动机性能的试验研究

随着大型柴油发动机经济性和排放要求的不断提升,以及对发动机稳态、瞬态特性要求的不断提高,传统的涡轮增压系统已无法满足船用发动机全工况性能的要求。为了提高产品竞争力和适配性,针对某8缸直列船用柴油发动机开发了带有定压排气管的相继增压系统,并进行了发动机台架试验研究。结果表明：发动机中、低转速时,相继增压系统使发动机比油耗可以下降5%-10%,排气温度降低30%-45%,烟度下降55%-60%；最大扭矩可以提升15.1%-36.4%；发动机最大扭矩转速工况突加突卸响应性提升约28%-29%；相继增压系统中定压排气管的设计使得发动机高工况性能也有所提升,从而实现发动机全工况性能的提升。     

Investigation of tailpipe and evaporative emissions from China IV and Tier 2 passenger vehicles with different gasolines

The limited understanding of vehicular emissions in China, especially evaporative emissions, is one obstacle to establishing tighter standards. To evaluate tailpipe and evaporative emissions, two typical China IV vehicles and one Tier 2 vehicle with an onboard refuelling vapour recovery (ORVR) system were selected and tested. One of the China IV vehicles was fuelled with gasoline, E10 and M15, respectively, to investigate the effect of fuel properties on vehicular emissions. For each vehicle, cold-start tailpipe emission tests were conducted first, followed by an evaporation test. Based on the emission factors and real-world vehicle activity data, the annual tailpipe and evaporative hydrocarbon (HC) emissions of each vehicle were calculated and compared. The results show that E10 and M15 significantly reduced the tailpipe CO and particle number (PN) emissions but seriously aggravated the NOx emissions, especially for M15. The hot soak losses (HSLs) and diurnal breathing losses (DBLs) were slightly impacted by the fuel properties. The annual evaporative emissions with E10 and M15 were higher than that with gasoline. The ORVR system effectively controlled the evaporative emissions, especially for DBLs. Evaporative emissions from the China IV vehicles were 1.1–1.4 times the tailpipe HC emissions. Additionally, the evaporative emission factors of the China IV vehicles were almost 50% lower than the standard (2.0 g/test), whereas their annual evaporative emissions were almost 1.8–2.8 times higher than those from the Tier 2 vehicle. Therefore, controlling evaporative emissions currently remains a great need in China, and the ORVR might be a recommended evaporative control technology.     

Apoptin原核表达载体的构建及在大肠杆菌中的表达

目的构建Apoptin的原核表达载体,并制备抗原物质Apoptin融合蛋白。方法在获得Apoptin融合基因的基础上,成功构建了Apoptin的高效原核表达载体pET-28a( )-Apoptin,将该质粒转化至大肠杆菌E.coliBL21(DE3)受体菌中,以IPTG对其进行诱导表达,聚丙烯酰胺凝胶电泳分析目的蛋白。结果转化有Apoptin的原核表达载体pET-28a( )-Apoptin的大肠杆菌E.coliBL21(DE3)经IPTG诱导后,经SDS-PAGE分析,在相对分子质量约17 000的位置出现目的蛋白条带,大小与Apoptin融合蛋白一致。结论Apoptin原核表达载体pET-28a( )-Apoptin能够表达出Apoptin融合蛋白,为进一步的Apoptin研究和制备Apoptin抗体奠定了基础。     

循环水动模装置现场总线控制系统的设计与应用

研制了一种循环水动态模拟装置现场总线控制系统的设计方案,采用上位机操作站和下位机智能测控组件组成的现场总线控制系统.上位机采用基于labvies语言的监控软件,主要承担监控任务;基于TMS320F2812 DSP的智能测控组件实现实时数据采集和自动控制功能,在上下位机的数据通讯上采用先进的OPC技术.系统具有安全可靠、功能完善、操作简便、性价比高等优点.