Time-series analysis of remote-sensed chlorophyll and environmental factors in the Santa Monica–San Pedro Basin off Southern California

The time-series of remote-sensed surface chlorophyll concentration measured by SeaWiFS radiometer from September 1997 to December 2001 and the relevant hydrological and meteorological factors (remote-sensed sea surface temperature, atmospheric precipitation, air temperature and wind stress) in Santa Monica Bay and adjacent waters off southern California were analyzed using wavelet and cross-correlation statistical methods. All parameters exhibited evident seasonal patterns of variation. Wavelet analysis revealed salient long-term variations most evident in air temperature during El Niño 1997–1998 and in wind stress during La Niña 1998–1999. Short-period (<100 days) variations of remote-sensed chlorophyll biomass were mostly typical to spring seasons. Chlorophyll biomass was significantly correlated with air temperature and wind stress: an increase of chlorophyll biomass followed with 5–6-day time lag an increase of wind stress accompanied by a simultaneous decrease of air temperature. The mechanism of these variations was an intensification of phytoplankton growth resulting from the mixing of water column by wind stress and entrainment of nutrients into the euphotic layer.     

微机控制的船用发电机继电保护实验装置

由于微机控制的继电保护与常规保护比较起来有许多优点,因此微机控制的船用发电机继电保护实验装置有其取代原有实验装置的必要性。本文就微机控制的船用发电机继电保护实验装置的硬件结构、软件算法和软件抗干扰技术进行了探讨。     

电力机车车轴热处理工艺的研究

分析了EA4T钢的性质特征以及传统调质处理工艺所存在的问题,系统地研究了正火、淬火及回火工艺对材料的组织及性能的影响规律。通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。     

Patterns in diversity and community structure of epipelagic copepods from the Brazil–Malvinas Confluence area, south-western Atlantic

Diversity and structure of epipelagic copepod communities were investigated using 70 zooplankton samples collected from the top 50 m of the Brazil–Malvinas Confluence area between 35° and 55°S. Biogeographic patterns were investigated using multivariate analysis. Biodiversity patterns were examined using different univariate indexes. Representatives of 35 species of copepods from 23 genera and 13 families were found. Two zones were delimited based on their copepod composition, one in the subtropical waters of the Brazil current, and the other in the subantarctic waters of the Malvinas current. Both environments displayed contrasting patterns of biodiversity depending upon which element is measured (regional species richness as well as mean point species richness were significantly higher in the subtropical group of stations, whereas taxonomic distinctness was significantly higher in the subantarctic community). Based on these contrasting results, we suggest the use of both kind of indexes when defining priority areas for conservation.     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

30m预应力混凝土T型梁钢模板加工工艺

本文以预应力混凝土T型梁中梁模板的侧模板为例,介绍了30m大型钢模板的结构,加工所用设备,并详细介绍了中梁钢模板的加工工艺,提出了加工过程中应注意的几个技术问题并进行了经济效益分析,认为采用现场加工工艺是可行的.     

带有改编能力限制的编组计划优化模型及算法

本文用一个非线性０－１规模模型，来描述带有改编能力限制的技术直达列车编组计划问题。能力约束增加了该问题的计算难度。这是一个ＮＰＣ问题。因此，获得一个全局最优解是困难的。本文用模拟退火算法解该问题。该算法可以以很高的概率获得全局最优解。文末列出了两个数值例子，并分别同了考虑和不考虑改编能车约束两种情况下的计算结果。     

T_H1 AND T_H2 CELL ANTIGEN RECEPTORS IN EXPERIMENTAL LEISHMANIASIS

Ｔ_Ｈ１ＡＮＤＴ_Ｈ２ＣＥＬＬＡＮＴＩＧＥＮＲＥＣＥＰＴＯＲＳＩＮＥＸＰＥＲＩＭＥＮＴＡＬＬＥＩＳＨＭＡＮＩＡＳＩＳＳｔｅｖｅｎＬ．Ｒｅｉｎｅｒ，ＷａｎｇＺｈｉ＇ｅｎ；ＦａｒａｈＨａｔａｍ，ＰｈｉｌｌｉｐＳｃｏｔｔ，ＲｉｃｈａｒｄＭ．Ｌｏｃｋｓｌｅｙ（...     

超高速实验车驱动方案设计及优化

研究速度在400-1000km／h的超高速实验车重接式电磁驱动方案,讨论重接式电磁驱动的电路结构和运动方程。在Maxwell3D瞬态场中搭建了驱动系统仿真模型,分析不同初始速度下,三级驱动系统受力特性和加速规律。针对系统运动特性和效率问题,提出驱动电路优化方案,使得发射体运动特性改善、效率提高。仿真结果表明：通过合理分配驱动单元,应用重接式电磁驱动的超高速实验车,可在短时间内被加速达到超高速的目标。     

Inventor参数化变压器三维结构设计

从铁道牵引变压器标准化的结构基本参数入手,利用Inventor软件采用Top-down设计思路,通过变压器基本参数建立结构骨架,然后与上级模块配合细化结构参数,完成初步结构设计,对结构优化完善,建立自适应模块,充实通用件库,最终完成总装配,生成与3D图参数关联的传统2D图纸,完成牵引变压器的设计。