Use of localized necking and fracture as a failure criterion in ship collision analysis

This study explores the use of localized necking for failure modeling in maritime crash analysis, using large shell elements. The assumption that the failure of a large shell element occurs simultaneously with the onset of localized necking is revisited. This study particularly investigates the numerical implementation of the localized necking condition and its implications on the results of ship collision analysis involving not only plate rupture but also various failure mechanisms such as the crushing and tearing of web girders, stringers, and their intersections. Through a series of large-scale collision simulations, the effects of bending deformation on the initiation of necking, non-proportional loading paths, and ductile fractures not preceded by localized necking, are investigated. It is demonstrated that a localized necking-based fracture model provides a reasonable, relatively mesh-insensitive estimate of the onset of fracture in the outer hull panels; however, fracture propagation is very sensitive to the numerical implementation of the necking and fracture model, especially for the cases involving the crushing of web frames and stringers.     

三峡船闸(139m水位)一闸室船舶待闸研究

通过优化三峡船闸输水阀门运行参数,满足了船舶在一闸室待闸的停泊条件;组织代表船型进行实船试验,形成了连续调度快速安全的调度工艺,取得了在139m水位条件下,三峡船闸下行通航效率提高15%的效果。     

浅水立波底部附近悬沙含量的二维分布

本文应用卡门理论得到浅水立波紊动粘性系数的计算式,再由此求出浅水立渡底部附近悬沙含量的二维解答,与Hattori的半经验结果符合良好。     

直流牵引变电所在供电系统运行仿真中的建模

讨论了直流牵引变电所在供电系统运行仿真中的建模问题。直流牵引变电所主要由整流变压器和硅整流器构成。在进行直流牵引供电系统的运行仿真时,将其按戴维南电路建模,其等效内电阻和理想电压源由交流电源和整流机组的参数以及负载情况决定。本文给出了12脉波整流机组的计算实例。     

转臂轴箱定位节点位置对机车动力学性能影响分析

利用SIMPACK建立某出口2B0机车动力学模型,分析了转臂轴箱定位节点的纵向位置对机车动力学性能的影响.研究表明节点纵向位置对机车横向稳定性有较显著影响,而对机车直线和曲线通过性能影响不大.得出了在动力学模型中,需要把转臂作为一个单独元件考虑,以减小计算误差的结论.     

远洋轮机模拟器生活冷库建模技术

通过对远洋轮机模拟器生活冷库建模过程，介绍了实时仿真建模技术的概念，说明了实时仿真建模的方法和特点。     

一种改进的基于密度和网格的高维聚类算法

提出了一种改进的基于密度和网格的高维聚类算法,并对算法有效性进行了验证.该算法通过减少样本点数量的方法达到减少稠密子空间数量.在发现高维稠密子空间时,对样本库进行精简.这些样本点的求得能有效减少求解最小聚类的时间复杂度.     

基于数字化设计系统的铁路站场BIM自动化建模研究

铁路站场设计是一项复杂庞大的系统工程,应用BIM技术可集成工程项目各种相关信息,形成工程数据模型,实现项目全生命周期中动态的工程信息创建、沟通和管理。然而,当前国内外铁路站场BIM的研究尚处于起步阶段,存在着建模工作量巨大,效率较低的问题。基于此,对铁路站场BIM模型快速构建方法进行了研究,提出基于铁路站场数字化设计系统,可将设计参数信息进行数字化保存,依据参数信息高效驱动铁路站场BIM模型的构建,并对铁路站场数字化设计系统总体架构与BIM模型设计插件的程序模块与流程进行了介绍。通过开发的软件原型系统初步验证,该方法能实现铁路站场BIM模型构建在效率与质量上的双重提升。     

The Reinforcement Analysis of Prestressed Anchor Frame Beam in the Deep Cutting Slope under Three Dimensional Strong EarthquakeEI北大核心

Research purposes: In order to further study the reinforcement of prestressed anchor frame beam in the deep cutting slope under three dimensional strong earthquake, a model of the deep cutting slope is built through FLAC 3D simulation software, the seismic wave to the model from three directions of x,y and z is input, and the dynamic response of the slope is analyzed. Then, the prestressed anchor frame beam reinforcement measures are applied to the model, and this paper analyzes the reinforcement effect of the prestressed anchor frame beam to the deep cutting slope under three dimensional strong earthquake. Research conclusions:(1) The prestressed anchor frame beam has a good effect on restraining the horizontal displacement of the deep cutting slope. (2) Under the three dimensional strong earthquake, the prestressed anchor frame beam has a good effect on the horizontal acceleration and horizontal velocity of the deep cutting slope, which reduces the peak of horizontal acceleration and horizontal velocity. (3) Through the comparison of the response before and after the reinforcement of the prestressed anchor frame beam is given under the 9 degrees three dimensional strong earthquake, it can be concluded that the prestressed anchor frame beam can provide good reinforcement effect to the deep cutting slope. (4) This research can be used for reference to the earthquake resistance of the slope engineering. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.