3洞小净距隧道围岩压力计算方法

针对3洞小净距隧道围岩压力计算问题,基于普氏平衡拱理论,将围岩压力看作单洞隧道的基本压力与相邻隧道开挖引起的附加压力之和,提出适用于3洞小净距隧道的围岩压力计算方法;根据该计算方法研究不同岩柱厚度、开挖跨度和开挖高度对围岩压力的影响规律,并将该计算方法应用于确定八达岭长城站3洞小净距隧道围岩压力。结果表明:随着岩柱厚度的增加,围岩压力不断减小,当岩柱厚度达到某一值时,围岩压力与单洞隧道相同;岩柱厚度、边洞跨度和中洞高度变化影响整体围岩压力,中洞跨度和边洞高度仅影响各自单洞围岩压力;3洞小净距隧道的最优开挖顺序为"先边洞、后中洞",中洞围岩压力大于边洞,应力值最大点为中洞顶部。施工中应注意中洞围岩稳定,采取有效的措施对岩柱区域进行加固。     

从施工工艺和防排水效果反思铁路隧道的防排水设计

铁路隧道防排水设计与施工一直困扰着铁路隧道建设者,完善的防排水理论设计在当前的施工技术条件下难以实现,致使一些地下水发育的隧道仍存在不同程度的渗漏水。结合设计、现场施工及运营后渗漏水病害整治,针对围岩防水、初期支护防水、仰拱防排水、施工缝防排水、排水板的设计与施工、无砟道床隆起原因等进行分析,提出取消衬砌背后环纵向盲管外裹无纺布、排水板可采取钉射或自粘的施工工艺、加强无砟道床仰拱防排水及带模注浆等防排水优化设计措施。     

山区高速公路填石路堤压实质量控制

目前对填石路堤的施工工艺与质量控制标准,世界各国、各地区的方法都不尽相同。本文针对填石路堤的特点,以宜长高速公路填石路堤为例,探讨和研究了山区高速公路填石路堤压实质量控制技术,将压实度、固体体积率、碾压遍数、松铺厚度、沉降率、动态模量等多种质量控制标准进行比较,从而比较合理地提出了填石路堤快速无损检测及质量控制方法。     

GPR在高速公路隧道掘进中掌子面前方岩体结构超前预报工作中的应用

以上(海)瑞(丽)高速公路湖南境内邵(阳)-怀(化)段芭蕉溪隧道掘进中掌子面前方岩体结构的超前预报为例,通过地质雷达(GPR)探测,结合TSP203探测以及开挖掌子面的详细地质素描等工作,可以实时、详细、准确地了解开挖掌子面前方的岩体结构情况,为施工单位合理安排施工作业进度、减少工程隐患提供科学依据。     

大断面地铁车站隧道软弱围岩渐进破坏规律模型试验研究

以贵阳市地铁2号线阳明祠车站为背景,采用室内模型试验模拟大断面地铁车站施工过程中隧道塌方破坏过程,明确施工期间大断面隧道塌方破坏过程机制,对比分析围岩和路面的变形。结果表明:通过围岩重力作用模拟隧道施工过程中塌方过程,与实际塌方过程基本吻合,弥补了常规加载破坏的不足;围岩渐进破坏过程表现为裂隙出现-裂隙发展-裂隙贯通-围岩塌方,支护渐进破坏过程表现为变形缓慢增加-变形快速增加-裂缝快速发展-支护破坏;围岩渐进破坏与支护渐进破坏相互作用,共同发展;在实际施工过程中,当支护变形大幅增加时,应增加支护强度,同时还应及时注浆、打设长锚杆,以减缓围岩裂隙发展,阻断围岩渐进破坏过程。     

软弱富水地层浅埋暗挖隧道地表沉降和支护结构受力的模型试验

以莞惠城际轨道交通工程项目GZH-5标段中DK32+300~DK32+927.303段为背景,通过2组模型试验,其中一组无超前注浆,另一组进行超前注浆,研究软弱富水地层浅埋暗挖隧道地表沉降和支护结构受力规律及超前注浆对其受力变形造成的影响,最后,针对软弱富水地层浅埋暗挖隧道施工,提出几点隧道工程设计和施工的相关建议。     

基于岩体指标和掘进参数的TBM净掘进速率预测模型

净掘进速率是TBM施工速度的主要评价指标,与围岩物理力学性质、TBM掘进参数之间存在一定相关性。文章以兰州水源地建设工程输水隧洞双护盾TBM施工为背景,基于现场实测数据,选择岩石单轴抗压强度、抗拉强度、变形模量、泊松比、岩石耐磨性CAI值等岩体指标,以及刀盘推力和刀盘转速等掘进参数,进行TBM净掘进速率与有关影响参数之间的单因素相关性分析,得到相应拟合公式;基于TBM净掘进速率与岩体指标、掘进参数之间的相关性,利用多元非线性回归方法建立了TBM净掘进速率预测模型。通过将兰州水源地建设工程输水隧洞实测TBM净掘进速率和预测结果进行对比,验证了TBM净掘进速率预测模型的合理性。研究结果表明:(1)在复杂的多种地质条件下,TBM净掘进速率与岩石单轴抗压强度、抗拉强度、变形模量、岩石耐磨性CAI值、刀盘推力以及刀盘转速呈负相关关系,与泊松比呈正相关关系;(2)干湿状态对岩石耐磨性CAI值有一定影响,饱和状态下岩石耐磨性CAI值与TBM净掘进速率之间的相关性更显著;(3)建立的多元非线性回归预测模型,预测精度较高,可为相似地质条件下TBM净掘进速率估算提供参考。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

板裂围岩结构弯曲失稳分析

文章分析了板裂结构地质背景及板裂介质岩体特征,研究了板裂围岩破坏模式及力学机理,并结合工程实例,利用随机有限元模型对板裂结构屈曲破坏进行分析。