供水特性对水润滑橡胶轴承衬套的影响

以船用水润滑橡胶轴承为研究对象,采用热-流-固耦合模型,研究水膜对水润滑橡胶轴承橡胶衬套的热传递及受力变形的影响,并通过控制变量法,探究供水特性对其温升和受力变形的影响。结果显示:水膜和橡胶的温度呈现出一种偏移的梯度变化;橡胶的受力变形呈现出带弧状的梯度分布;供水速度对橡胶温升和受力变形的影响显著,供水温度和密度对其受力变形的影响程度也不容忽略。     

The uplift capacity of single-plate helical pile in shallow dense sand including the influence of installation

The helical pile has been used to resist the tension for a long time. However, the prediction of the uplift capacity of helical piles including the influence of installation is still a challenge in design. Based on the change in stress according to Mohr-Coulomb failure criterion, a simple theoretical method has been developed, which can calculate the uplift capacity of shallow pre-embedded circular plate anchors and the uplift capacity of helical piles installed by torque and compression. In order to analyse the influence of installation process of a single-plate helical pile on its uplift capacity and verify the theoretical model, a series of model tests have been conducted in dense saturated sand. The single-plate helical piles with different out diameters of helixes have been installed with different installation speeds, and then, the single-plate helical piles have been moved up monotonically. The test results show that the installation speed and the size of the out diameter of the helix have significant influence on the uplift capacity of the helical piles, and the results of the theoretical method have a good fit with the test results. Using this simple theoretical method, the designer can easily predict the uplift capacities of helical piles, which includes the influence of installation.     

整治建筑物壅水及重力相似偏离影响的初步研究

简述整治建筑物的壅水及其机理,归纳出局部水头损失壅水的通用公式。将丁坝工程壅水区分为床面摩阻损失增大壅水和局部水头损失壅水2部分。在ΔFr>0的模型中,采用换算式ΔZp=ΔZm.hλ,定性地说是偏大的。可采用换算式Δhfp=Δhfmhλ。而丁、潜坝局部水头损失的壅水,则应采用hjp=Δhjmλu02。     

客运专线牵引变压器选型综合分析

在分析高速牵引负荷特性的基础上,基于为机车提供可靠供电和满足用电的相应国家标准和技术规则的综合要求,从电力系统、综合补偿、机车3个方面论及了客运专线牵引主变压器接线选型。     

特种筒形桅杆风压试验

锥形筒形桅杆是一种新型桅杆 ,由于其结构的特点 ,风载可能对它产生较大的威胁。通过四面锥状筒型桅杆的风洞试验 ,研究了桅杆模型在不同风向下 ,在雷诺数 1 .7× 1 0 5 Re 7.8× 1 0 5的范围中 ,其周向与轴向的表面压力分布 ,给出了桅杆模型表面压力系数沿周向与轴向的变化规律 ,并作了分析 ,阐明了其与风向、雷诺数之间的关系。通过桅杆模型表面压力的周向积分 ,得到了模型的升力与阻力 ,导出升力系数与阻力系数 ,并分析了二者随雷诺数及风向的变化规律。试验分析结果表明 :压力系数沿轴向的分布不均匀 ,靠近桅杆模型的中间部位 ,压力系数较大 ;在桅杆模型的两端 ,压力系数较小。压力系数沿周向的分布与风向有关 ,在迎风面上 ,压力系数最大 ,在背风面上 ,压力系数最小。升力系数与阻力系数也与风向密切相关 ,并且随着风向的变化 ,有较大的变化。在筒型桅杆设计中 ,应充分考虑到风向变化所引起的风载变化。     

Benthic community patterns reflect water column processes in the Northeast Water polynya (Greenland)

Benthic community patterns were investigated in the Northeast Water polynya (Greenland) during the summers of 1992 and 1993 to elucidate to what extent the bottom fauna is influenced by the dynamics of the overlying water. Five different fractions of the benthos (foraminiferans, nematodes, polychaetes, peracarid crustaceans, and epibenthic megafauna), ranging in average adult body size over 6 orders of magnitude (from about 100 μm to about 10 cm), were sampled quantitatively at 69 stations in water depths from 40 to 515 m. Total abundances of nematodes, polychaetes and peracarid crustaceans were found to be primarily correlated with parameters characterizing the potential benthic food supply (water column pigment and nitrate concentrations, sediment bound pigments and sediment biological activity), whereas abundances of foraminiferans and megabenthos were largely associated with seabed properties. Four benthic zones were distinguished by separately analyzing the faunistic composition and distribution of the five community fractions for Ob Bank, Western Westwind Trough, Eastern Westwind Trough, and Belgica Trough. This pattern was shown principally to reflect pelagic regimes differing in surface water hydrography, ice cover and euphotic productivity. This is the first time that a synoptic study of several benthic community portions spanning such a range in sizes and life styles has been performed in a polar shelf ecosystem. Our results indicate that abundances as well as composition of Arctic benthos are largely influenced by mesoscale pelagic processes, and thus provide further evidence for the importance of the benthic-pelagic coupling in high latitude seas.     

电机悬挂方式对LIM地铁系统动力特性的影响研究

研究目的：研究直线电机地铁在不同电机悬挂方式下的气隙变化规律及车辆、轨道的动力响应特性，并将二者进行比较。研究方法：应用车辆轨道耦合动力学理论，分别建立不同悬挂方式下的系统模型并编制相应的仿真程序，通过在轨道局部加入谐波型余弦不平顺激励对系统的动力特性进行分析。研究结果：2种悬挂方式对系统的各向加速度和轮轨力的影响差别较小，而气隙变化呈现明显不同的规律。研究结论：直线电机采用架悬式悬挂时，要严格控制幅值大于5．5mm的长波不平顺，防止电机和反力板之问的刮蹭；而当采用抱轴式悬挂时，要注意控制大幅值的短波不平顺出现，防止气隙过大，影响电机效率。     

转K2型转向架弹簧载荷识别及其对弹簧寿命影响的研究

用试验的方法得到在垂直载荷作用下弹簧45°方向应力和最大主应力之间的差异,用有限元法计算了弹簧在横向、垂向加载时的载荷识别系数。根据线路实测动应力识别出转K2型转向架弹簧在运用工况下的2种载荷。最后根据载荷计算出弹簧的应力,利用疲劳损伤模型计算出损伤,得出了2种载荷对疲劳寿命的影响。     

青藏铁路大风天气运输组织方法

青藏高原大风天气多,空气密度小,大风对铁路运输安全的影响与低海拔地区差异较大。利用车辆动力学原理建立列车临界翻车风速模型,分别计算青藏铁路海拔3 000 m和4 000 m冻土和非冻土地区的临界翻车风速和危险翻车风速,以及给定风速条件下车辆限制速度。计算结果表明,青藏铁路临界翻车风速随海拔升高而增大,随冻土路基病害出现而降低。参考英、日等国大风标准,结合青藏铁路的特点,根据危险翻车风速和临界翻车风速,初步提出青藏铁路海拔4 000 m地区安全行车标准及特定运行条件、冻土地区线路出现病害情况下的安全行车标准及特定运行条件。提出列车限速运行、增加车辆载重、提高列车编组水平、提高司机操作水平、改善棚车顶部外形、加强货运检查、注意车辆防溜和风沙地区线路检查等大风天气运输组织措施。     

海上单桩风力发电平台简化设计

采用在欧洲已经进行商业化运作的独立桩双段结构，桩基础采用带有过渡段的单桩。塔架上的风力发电机采用丹麦Vestas公司的V80风力发电机。参考DNV-OS-J101和API-RP-2A中的工作应力设计法，进行结构静力、桩基础的承载力，涡激振动、疲劳寿命，结构动力学等分析。静力分析分析极端环境下的组合工况；桩基础主要计算桩的轴向承载力和校核水平承载力，并采用有限元模型模拟桩土相互作用；涡激振动分析主要考虑不同风速下塔架的升力以及引起的横向振动；疲劳分析根据涡激振动分析的结果利用S-N曲线对基础寿命进行了评估；动力学分析求出了结构的固有频率，并进行了波浪力作用下的瞬态历程分析。