半约束模型试验--一种验证随浪和斜浪中波浪力计算的手段

本文采用半约束模型试验技术，对一条高速船在规则波中随浪和斜浪工况进行了流体动力系列试验，以探讨航运的安全性，验证作用于船体上波浪力的估算方法。对每次试验，以波动方程的形式采用数值估算方法确定环绕船模的波浪运动的时间历程。并用同样的方法从测量数据中提取垂荡和纵摇与模型测量运动，一阶波导纵荡、横荡作用力和首摇力矩。因此合理比较理论计算的波浪力与力矩的时间历程成为可能。这表明SSPA海事动力学的研究所(MDL)模型试验设施可以提供高质量的测量，与所述计算方法结合起来可用来验证理论计算和建立半经验方法。     

汽车动力总成弯曲振动应力响应及其激励灵敏度分析

本文利用文献（５）建立的汽车动力总成弯曲有限元分析模型，计算分析离合器壳的动应力响应，并考察了动应力关于不平衡质量位置的灵敏度，对计算分析进行了实验验证。     

双自由度舵机执行机构冲击载荷的仿真分析

超高速水下航行体航行过程中工况复杂,在加速段速度跨度大,双自由度舵机执行机构承受了较大的瞬态冲击载荷,有必要对其韧性进行分析校核。本文分别建立旋转机构输出轴、减速箱体和展开机构最后一级齿轮副的多刚体动力学仿真模型,分析各机构在冲击载荷下的应力和变形情况,校核结构韧性的可靠性,同时对旋转机构输出轴进行模态分析。仿真与校核结果为机构优化设计提供参考依据。     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.     

Time-domain coupled dynamic simulation for SFT-mooring-train interaction in waves and earthquakes

In this study, Submerged Floating Tunnel (SFT)-mooring-train coupled dynamics is solved in the time domain to investigate their dynamic and hydro-elastic interactions under wave and earthquake excitations. The SFT is modeled by the rod-FE (finite element) theory, and it is connected to mooring lines through dummy-connection-mass and linear and rotational springs. A 3D rigid-multi-body dynamic model is developed for train dynamics that consists of seven rigid bodies. The tunnel-train interaction is taken into consideration based on the wheel-rail correspondence assumption and the simplified Kalker linear creep theory. The developed computer simulation program is validated through comparisons with commercial programs and published results when possible. In the case of earthquake-induced dynamics of the coupled system, the effects of soil conditions, tunnel length, mooring interval, seismic-wave propagation, and seaquake are investigated. The magnitudes of the SFT downward motions induced by the moving train are small compared with the motions induced by earthquakes. The earthquake causes transient SFT responses especially at their lowest wet natural frequencies while high-frequency motions are induced by seaquake effect. Structural damping and seismic propagation play an important role in dynamic responses. The interaction of the tunnel and moving train is also evaluated for various train speeds in terms of the derailment and offload factors and riding-comfort criterion. For the given SFT and train designs, the offload factor and riding-comfort criterion can slightly exceed their limits at certain earthquake conditions with the speed as high as 70 m/s, which can be adjusted by reducing train speed.     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

声激励位置对简单导管声辐射特性的影响

文章借助NASTRAN软件,研究了单极子和偶极子声激励位置对简单刚性导管声辐射特性的影响。结果表明：（1）声源的径向位置对导管声辐射影响大,而轴向位置影响小,声源越靠近导管壁,辐射声功率峰值越大;（2）对于单极子而言,声源偏离径向中心位置时,声场的对称性取决于声源的频率值;（3）偶极子声源的方向对于导管声辐射特性的影响很大,必须加以考虑。     

一种紧凑的圆波导 TE01模式激励器

提出了一种基于微带结构的K波段圆波导 T E01模式的激励器。该激励器由四个微带贴片单元环形排列组成,通过设计合理的馈电网络实现TE01模式的辐射。运用 HFSS电磁仿真工具分析了该激励器在圆波导中对TE01模式电磁波的激励情况,并设计了一个微波传输损耗测量实验来验证T E01模式激励的有效性。     

轮毂电机驱动电动汽车3种构型的平顺性分析

针对轮毂电机驱动电动汽车3种构型,对其平顺性问题展开研究。分别采用滤波白噪声方法和三角形凸块描述随机路面激励和脉冲路面激励。建立了轮毂电机驱动电动汽车3种构型的振动模型,确定了相应的平顺性评价指标。在随机路面和脉冲路面下,采用Matlab/Simulink仿真了轮毂电机驱动电动汽车3种构型的平顺性。研究结果表明,具有吸振结构的构型2和具有悬置结构的构型3与传统悬架的构型1相比,降低了轮毂电机驱动电动汽车随机路面和脉冲路面的平顺性评价指标。     

DF7型机车的故障励磁控制系统设计

针对DF7型机车车载微机(或者电子恒功率调节器)出现故障时改用故障励磁控制系统的固定励磁电流存在的缺陷,提出改用故障恒功励磁器方案,介绍了故障恒功励磁器原理,给出了水阻试验和正线试车情况,表明故障恒功励磁器可保障机车安全稳定牵引运行。