盾构隧道壁后注浆中“定时浆”试验研究

我国盾构隧道广泛使用凝结时间较长的单液浆，但由于注入后不能及时凝结常常引发管片上浮、浆液流失等工程问题。针对这些问题提出“定时浆”的概念。通过在单液硬性浆中添加氯化铝溶液与水玻璃，基于浆液的胶结时间、流动度、28 d强度等指标研究了“定时浆”的配方。结果表明： 1）通过先加入氯化铝溶液再加入水玻璃的方法，可以实现浆液“定时”凝结； 2）在硬性浆中掺加0.50%~0.75%的氯化铝溶液、1.00%~1.25%的水玻璃，可以达到良好的定时效果； 3）通过简单的注浆设备改造可以形成“双液单注”的定时注浆工艺。     

A simple formulation for predicting the ultimate strength of ships

The aim of this study is to derive a simple analytical formula for predicting the ultimate collapse strength of a single- and double-hull ship under a vertical bending moment, and also to characterize the accuracy and applicability for earlier approximate formulations. It is known that a ship hull will reach the overall collapse state if both collapse of the compression flange and yielding of the tension flange occur. Side shells in the vicinity of the compression and the tension flanges will often fail also, but the material around the final neutral axis will remain in the elastic state. Based on this observation, a credible distribution of longitudinal stresses around the hull section at the overall collapse state is assumed, and an explicit analytical equation for calculating the hull ultimate strength is obtained. A comparison between the derived formula and existing expressions is made for largescale box girder models, a one-third-scale frigate hull model, and full-scale ship hulls.List of symbols A _B total sectional area of outer bottom - A _B total sectional area of inner bottom - A _D total sectional area of deck - A _S half-sectional area of all sides (including longitudinal bulkheads and inner sides) - a _s sectional area of a longitudinal stiffener with effective plating - b breadth of plate between longitudinal stiffeners - D hull depth - D _B height of double bottom - E Young's modulus - g neutral axis position above the base line in the sagging condition or below the deck in the hogging condition - H depth of hull section in linear elastic state - I _s moment of inertia of a longitudinal stiffener with effective plating - l length of a longitudinal stiffener between transverse beams - M _E elastic bending moment - M _p fully plastic bending moment of hull section - M _u ultimate bending moment capacity of hull section - M _uh ,M _us ultimate bending moment in hogging or sagging conditions - r radius of gyration of a longitudinal stiffener with effective plating [=(I _s /a _s )^1/2] - t plate thickness - Z elastic section modulus at the compression flange - Z _B ,Z _D elastic section modulus at bottom or deck - slenderness ratio of plate between stiffeners [= (b/t)(_y/E)^1/2] - slenderness ratio of a longitudinal stiffener with effective plating [=(l/r)(_y/E)^1/2] - _y yield strength of the material - _yB , _yB , _yD yield strength of outer bottom, inner bottom - _yS deck, or side - _u ultimate buckling strength of the compression flange - _uB , _uB , _uD ultimate buckling strength of outer bottom - _uS inner bottom, deck, or side     

成都的城市景观——传统与未来

~~成都的城市景观——传统与未来@郑小明$成都市规划设计研究院!四川成都610015~~~~     

荷兰海军APAR多功能雷达系统及其开发经验

为充分发挥多功能优势,APAR雷达采用了高效控制手段,对雷达信号收/发时间和能量进行综合管理,综合平衡二者系统资源开支。APAR雷达波形设计还综合考虑了包括作战需求、接收信号特征、技术特征和参数等在内的各种因素。APAR雷达在系统设计、系统工程、详细设计与评估测试等方面均进行了总体规划,并很好地吸收了已有的技术积累,保证了系统最终成功。     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.     

无坎宽顶堰流量系数的计算及讨论

通过采用二元非线性回归分析方法对多个数学模型进行分析,结合实测资料,得到了水利工程中无坎宽顶堰流量系数的经验公式,克服了查表法中需要通过多步直线内插带来的不便,更适合在水力计算中应用。     

基于系统集成理论的城市道路景观设计

在我国城市道路景观实践过程中,由于建造时序的不同,城市道路的“景观破碎、缺乏集成”和“豪华奢侈、脱离实际”,不利于城市系统的和谐发展。鉴于此,本文在深入分析城市道路景观建设目标的基础上,独辟蹊径从系统范畴的角度探讨了一种“集成”的道路景观设计理念,为城市道路景观的建设提供了一个新的思路。     

基于钢管砼拱桥病害试验探讨其主拱强度计算公式的修正

鉴于西南某钢管砼拱桥存在较严重的安全隐患而拆除,对该桥的拱圈核心砼进行取样、试验研究,分析其强度分布规律.根据试验资料,讨论钢管砼拱桥应用现有的钢管砼构件理论进行计算时,其计算公式的修正.     

大型铁路客运枢纽换乘服务研究

站在运输服务设计的角度,以增强旅客换乘出行体验为目的,提出“人、行李分离”的换乘服务理念,并基于该服务理念设计铁路客运枢纽内同站和异站换乘的方案。异站换乘方案设计时,提出铁路专用车的概念,打造一种全新的换乘模式,满足旅客换乘出行的多元化需求,吸引旅客主动换乘。最后,从心理和生理舒适性两个角度对换乘服务理念进行评价,结果表明“人、行李分离”服务创造了旅客换乘出行附加价值,提高了旅客的换乘出行体验感。