供水特性对水润滑橡胶轴承衬套的影响

以船用水润滑橡胶轴承为研究对象,采用热-流-固耦合模型,研究水膜对水润滑橡胶轴承橡胶衬套的热传递及受力变形的影响,并通过控制变量法,探究供水特性对其温升和受力变形的影响。结果显示:水膜和橡胶的温度呈现出一种偏移的梯度变化;橡胶的受力变形呈现出带弧状的梯度分布;供水速度对橡胶温升和受力变形的影响显著,供水温度和密度对其受力变形的影响程度也不容忽略。     

Benthic community patterns reflect water column processes in the Northeast Water polynya (Greenland)

Benthic community patterns were investigated in the Northeast Water polynya (Greenland) during the summers of 1992 and 1993 to elucidate to what extent the bottom fauna is influenced by the dynamics of the overlying water. Five different fractions of the benthos (foraminiferans, nematodes, polychaetes, peracarid crustaceans, and epibenthic megafauna), ranging in average adult body size over 6 orders of magnitude (from about 100 μm to about 10 cm), were sampled quantitatively at 69 stations in water depths from 40 to 515 m. Total abundances of nematodes, polychaetes and peracarid crustaceans were found to be primarily correlated with parameters characterizing the potential benthic food supply (water column pigment and nitrate concentrations, sediment bound pigments and sediment biological activity), whereas abundances of foraminiferans and megabenthos were largely associated with seabed properties. Four benthic zones were distinguished by separately analyzing the faunistic composition and distribution of the five community fractions for Ob Bank, Western Westwind Trough, Eastern Westwind Trough, and Belgica Trough. This pattern was shown principally to reflect pelagic regimes differing in surface water hydrography, ice cover and euphotic productivity. This is the first time that a synoptic study of several benthic community portions spanning such a range in sizes and life styles has been performed in a polar shelf ecosystem. Our results indicate that abundances as well as composition of Arctic benthos are largely influenced by mesoscale pelagic processes, and thus provide further evidence for the importance of the benthic-pelagic coupling in high latitude seas.     

电机悬挂方式对LIM地铁系统动力特性的影响研究

研究目的：研究直线电机地铁在不同电机悬挂方式下的气隙变化规律及车辆、轨道的动力响应特性，并将二者进行比较。研究方法：应用车辆轨道耦合动力学理论，分别建立不同悬挂方式下的系统模型并编制相应的仿真程序，通过在轨道局部加入谐波型余弦不平顺激励对系统的动力特性进行分析。研究结果：2种悬挂方式对系统的各向加速度和轮轨力的影响差别较小，而气隙变化呈现明显不同的规律。研究结论：直线电机采用架悬式悬挂时，要严格控制幅值大于5．5mm的长波不平顺，防止电机和反力板之问的刮蹭；而当采用抱轴式悬挂时，要注意控制大幅值的短波不平顺出现，防止气隙过大，影响电机效率。     

中间轴驱动装置固定对弹性悬挂式机车动力学性能的影响

为防止弹性悬挂式机车中间轴驱动装置横向位移过大,发生碰撞,提出了端轴驱动装置弹性悬挂、中间轴驱动装置固定连接的方式。利用多体动力学软件SIMPACK建立整车动力学模型,对比分析驱动装置悬挂方式对机车动力学性能的影响,认为采用这种悬挂方式是合理可行的。     

船舶液力耦合器的人工神经网络的数学建模

从船舶动力装置动态建模与仿真的实际需求，引出了其主要部件之一的液力耦合器数学建模在稳／动态特性研究中的重要性，以及利用其试验曲线(输入特性形式)作为数据源去构建准稳态数学模型的困难之处：寻找一种通用的数学表达形式，以实现①液力耦合器在额定工况及其附近的试验曲线的内插与外廷；②过渡工况液力耦合器数学模型的设计(如液力耦合器接合和脱开过程其滑差从100％向额定滑差值方向的变化)。本文介绍了人工神经网络方法在液力耦合器动态建模中的应用。文章先介绍了其数学建模的思路和要点：①选择人工神经网络算法(包括传递函数)与结构(人工神经网络隐含层数目和神经元个数)；②提高人工神经网络泛化能力的措施；③利用专业知识扩充人工神经网络训练用的数据样本。然后叙述了其数学模型在某船舶动力装置稳态、动态特性计算机仿真研究中的某些有意义的结果：①正常航行(四机双桨)稳态工况时各车令下液力耦合器的滑差；②不同螺旋桨螺距下的液力耦合器接合过程的滑差变化；③怠速→前进五的急加速过程的滑差变化。     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

单片机测控系统的抗干扰技术

本文介绍了单片机测控系统所受干扰的种类和传播途径,并针对其组成部件的电路结构、功能特点、所处环境提出了具体的抗干扰技术.     

宜万铁路宜昌长江大桥主桥创新技术研究

宜万铁路宜昌长江大桥主桥采用(130 2×275 130)m连续刚构柔性拱组合结构,桥型方案为铁路桥梁首次采用,设计中针对结构构造、受力、施工等特点,采用了多项技术创新,包括桥梁结构、构造和材料等方面。     

带空间管系的船舶水泵机组隔振浮筏性能研究

基于船舶水泵机组隔振浮筏这种多挠动源的系统,探讨了浮筏装置所具有的特性以及隔振设计技术.利用有限元法数值模拟了隔振系统忽略和计及管系下的两种模型,综合分析了空间管系对浮筏隔振系统隔振性能的影响,并就管路和机组间刚性连接和多种弹性连接下系统隔振性能作了对比分析.分析结果表明,空间管系减弱了系统的隔振性能,在动力设备和管路间使用挠性接管等弹性连接可大大减小管系的影响.文中探讨了水泵机组的隔振设计技术以及为了提高隔振性能而应注意的若干方面.     

一种新型双模微带带通滤波器

在传统方形双模滤波器的基础上，提出了一种新的微带带通滤波器结构。该结构很好解决了传统滤波器的辐射损耗和体积大等问题。它可以应用到混合或单片微波集成电路中，更加有效地抑制高次谐波输出。利用上述结构仿真并设计了一个中心频率在1GHz，并能有效抑制高次谐波的带通滤波器，测试结果满足设计要求。