通孔玻璃材料的研制

研究了利用废旧玻璃用松装烧结和模压烧结方法生产通孔材料的可能性，以及原始粉末尺寸、烧结工艺和造孔剂添加量对通孔材料的密度和孔隙度的影响。实验结果表明，用废旧玻璃经松装烧结或模压烧结后可制得通孔材料；松装烧结时，随烧结温度提高，烧结保温时间延长，原始粉末粒度变细，烧结后通孔材料的密度增大，而孔隙度降低；模压烧结时造孔剂的最佳百分含量为５％～５０％，且通孔材料随造孔剂的百分含量增加，密度降低，孔隙度增大。     

电力机车司机室侧窗玻璃隔声性能的仿真研究

通过噪声仿真软件VA one建立了电力机车司机室侧窗玻璃的统计能量仿真模型,对比分析了不同厚度的单层玻璃、不同中间空气层厚度的双层中空玻璃以及夹层玻璃的隔声量,并与试验结果相对比。仿真结果表明:夹层玻璃的隔声效果较好。     

新型纤维增强混凝土梁的抗弯冲击特性

为了研究纤维增强混凝土梁的抗弯冲击特性．利用自制的自由落锤抗弯冲击试验装置，测定了不同体积掺率下细直径的腈纶纤维、聚酯纤维、玻璃纤维，粗直径的聚丙烯纤维和哑铃形钢纤维增强混凝土梁的抗弯冲击力学性能。试验表明：纤维增强混凝土梁的冲击次数与纤维品种和体积掺率有关；当细直径纤维的体积掺率为0．07％～O．27％时，纤维增强混凝土梁的初裂、破坏冲击次数分别为素混凝土的1．1～4．5倍和1．1～4．4倍；当粗直径纤维的体积掺率为O．5％～1．4％时，纤维增强混凝土梁的初裂、破坏冲击次数分别为素混凝土梁的2．4～4．6倍和5．2～31．0倍。细纤维增强混凝土梁的初裂冲击性能优于粗纤维增强混凝土梁．粗纤维增强混凝土梁的破坏冲击性能和冲击延性明显优于细纤维增强混凝土梁。     

玻璃幕墙对游艇码头防波堤消浪性能的影响

海南龙沐湾八爪鱼游艇码头防波堤工程设计方案,通过在堤顶设置玻璃幕墙提高挡浪能力。采用物理模型断面试验,测量不同的幕墙和护面块体组合方案下的堤后波高、越浪量及幕墙所受波浪力。结果表明,新结构有助于提高防波堤挡浪能力,在满足游艇码头对港内波高要求的同时,兼顾了美观性,具有推广应用的价值。     

城市轨道交通ATS系统外部接口日志分析

青岛地铁11号线采用的是国内自主研发的自动列车监控系统(ATS),ATS系统作为一个综合信息监控系统的实现平台,以通信前置机作为通信枢纽,与时钟系统、乘客信息系统、广播系统、综合监控系统、无线系统等实现接口.现结合现场实际运行数据,采用UltraEdit文本编辑工具对通信前置机的日志进行检索、分析,通过系统后台的日志分...     

LGF复合材料在商用车中的应用研究

LGF即为长玻纤增强热塑性复合材料,具有密度低、比强度高、回收利用率高等特点,对汽车轻量化的发展具有重要意义。文章介绍了长玻纤增强热塑性复合材料在国内外的发展状况、成型工艺、性能特点、现有问题及解决办法,最后针对商用车轻量化的要求,提出采用长玻纤增强PP材料代替原铝合金走台板方案。     

玻璃钢模板在南京港龙潭港区四期水工码头Ⅱ标段中的应用

为提高施工效率和降低成本,在南京港龙湾港在四期水工码头Ⅱ标段引桥圆形立桩施工中,采用新型的平板玻璃钢模板,替代传统的钢模板或木模板施工方法。对玻璃钢板的制作和施工工艺进行详细的介绍。采用玻璃钢模板施工法浇注的圆柱,其光洁度完全达到清水混凝土的效果,并且工艺简单,节约成本,有重要现实意义。     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

An algorithm for oceanic front detection in chlorophyll and SST satellite imagery

An algorithm is described for oceanic front detection in chlorophyll (Chl) and sea surface temperature (SST) satellite imagery. The algorithm is based on a gradient approach: the main novelty is a shape-preserving, scale-sensitive, contextual median filter applied selectively and iteratively until convergence. This filter has been developed specifically for Chl since these fields have spatial patterns such as chlorophyll enhancement at thermohaline fronts and small- and meso-scale chlorophyll blooms that are not present in SST fields. Linear Chl enhancements and localized (point-wise) blooms are modeled as ridges and peaks respectively, whereas conventional fronts in Chl and SST fields are modeled as steps or ramps. Examples are presented of the algorithm performance using modeled (synthetic) images as well as synoptic Chl and SST imagery. After testing, the algorithm was used on > 6000 synoptic images, 1999–2007, to produce climatologies of Chl and SST fronts off the U.S. Northeast.     

玻璃钢防腐蚀材料检测方法

针对海洋环境下混凝土结构易遭受海水侵蚀导致结构破坏、而高性能混凝土等技术措施不能满足高耐久技术要求的现状,采用玻璃钢包覆防腐蚀技术以提高海工混凝土结构耐久性。对玻璃钢包覆防腐蚀材料的原材料和耐久性检测方法进行分析,提出原材料和耐久性检测方法,以利于玻璃钢防腐材料施工质量的控制。