秦岭当归的生药学研究

作者对民间药秦岭当归的来源、生药性状、显微组织结构,粉末特征以及薄层层析定性、挥发油含量测定等方面进行了系统的生药学研究,并与当归进行了比较。同时,应用原子吸收分光光度法对其所含铜、锌、锰、铁等8种微量元素进行了测定。从而为秦岭当归的鉴别,品质评价,质量标准的制定及进一步的开发利用提供了科学依据。     

薄板激光填丝焊工艺研究

研究了一种新的焊接工艺方法——激光填丝焊，改进和设计了该工艺专用的送丝机及其位置精密调整机构，并对其主要工艺参数进行了初步试验与分析，提出了确定送丝速度的经验公式。激光填丝焊是对接焊缝存在较大间隙条件下直用激光焊的一种新工艺，它可以提高激光焊接件在实际生产中装配加工精度。     

模拟异种钢接头蠕变力学特性的数值分析

利用有限元数值模拟了高强匹配异种的接头在弹性－蠕变条件下的应力／应变场，结果表明，接头的应力／应变分布不均匀，在焊缝界面上，应力和应变分别呈不连续和不协调分布特性，并随着拦头各区蠕变强度差别的增大，其分布梯度增大，峰值应力／应变提高，因此，蠕变强度梯度大的高强焊缝和低强母材的界面是接头的薄弱部位。     

On the axial force induced on a duct by a propulsor

The axial force induced on a duct (duct thrust) which surrounds a propulsor is, by means of an energy conservation argument, expressed in terms of the thrust and power of the propulsor and the kinetic energy losses per unit of time of the propulsor and the duct. Emphasis is put on the linear theory of an axisymmetric ducted actuator disk, where it is shown that the work done by the duct thrust is equal to the extra work done by the actuator disk when it is surrounded by the duct. This simplified model gives more insight into the interaction between the propeller and the duct and on the limits of linearization.     

预应力孔道灌浆高性能浆体的试验研究

介绍后张预应力孔道灌浆中高性能水泥浆体的配制,并通过相关试验,对灌浆浆体的配比与性能进行了研究。     

大跨地铁风道导洞开挖的地表沉降分布规律研究

北京地铁8号线大红门桥站-和义站区间附属风道为跨度16.2 m的单跨结构,采用暗挖洞桩法(PBA工法)施工。为有效控制导洞开挖引起的地表沉降,必须合理安排导洞施工顺序。基于三维数值模拟方法对不同的导洞开挖方案地表沉降分布规律进行研究,并与地表沉降监测结果进行比较分析。结果表明:不同的导洞开挖顺序的地表沉降发展路径差别显著,但最终的沉降值基本一致;随着导洞的开挖,地表沉降槽宽度增加并不明显,但是由于导洞开挖的群洞效应,地表沉降速度发展较快。因此在后续的拱部开挖支护中,必须通过调整支护措施和开挖方案来严格控制地层沉降。     

铁路货场土壤重金属污染研究

铁路货场重金属矿石运输会对货场土壤造成污染,通过实验分析了铁路土壤污染状况,介绍了土壤污染的危害,对目前国内外的土壤修复技术进行了总结。根据铁路货场的实际情况,提出了铁路货场土壤重金属污染的修复方式。     

机车轮缘干式减磨新技术的应用研究

介绍了基于表面工程原理的新型轮缘干式减磨技术。应用研究表明这种采用金属减摩修复技术的产品不但安全、适用,其两种适用于不同线路产品的减磨效果,较既用产品分别提高了8%和40%以上。     

高速公路岩质及不稳定边坡工程与生物防护结合技术研究

较为详细地质介绍了引进吸收的日本先进坡面防护技术——金属框架整体防护技术。此技术把工程防护与生物防护有效地结合起来，既保证了切割坡面的力学稳定性，又利用生物防护有效地绿化美化坡面，防止水土流失。对各种风化、兰风化岩石边堤及其它不稳定边坡的防护可产生良好的效果。     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.