泰国三机场高铁列控系统方案研究

对泰国三机场高铁项目的列控系统选择要求进行分析,提出列控系统方案并进行综合比选,最后提出泰国三机场高铁项目的列控系统推荐方案,研究成果可以为海外项目列控系统方案选择提供一定的参考。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

粘弹性人工边界在地下结构抗震分析中的应用

地下结构地震反应分析需考虑结构-地基的动力相互作用,其中场地土层的自由场反应分析是确定地震输入的关键问题。以往地下工程实例表明,在结构动力时程计算中,能否有效模拟无限地基边界对结构抗震分析有很大的影响。基于某地下综合体项目进行抗震评估,采用黏弹性人工边界模拟自由场震动响应,克服工程中传统分析里不能模拟场地无限域的缺点。为地下结构的动力时程分析提供可靠数值依据。     

重载铁路四线高墩连续梁桥的设计

神瓦(神木—瓦塘)铁路冯家川车站大桥为重载铁路四线桥,主桥采用4线(65+100+65)m连续梁,最大墩高85 m.桥上线间距大,上下部结构横向尺寸较大,利用有限元分析软件BSAS,MIDAS/FEA对结构受力进行了计算分析.结果表明:在主梁梁高相同的情况下,采用单箱三室截面能更好地减小主应力,采用单箱双室截面增加腹板厚度对主应力的改善有限;多线桥桥墩横向尺寸较大,空心截面设置纵肋板能很好地提高高墩的局部稳定性;主梁及桥墩各项计算指标均满足规范要求.     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

基于分段单孔反演的隧址区多断层地应力分布特征

目前，针对具有多个原位地应力测试钻孔的隧址区初始地应力场反演，往往一次性将全部实测值用以计算值的回归反分析，没有考虑到隧道纵向长度远超其他方向且钻孔分布较远的特点，单个钻孔表征的临近区域地应力分布特征或反演精度被其余钻孔实测值“拉低”，导致整体反演结果容易陷入局部优解。依托拉林铁路桑珠岭隧道、叙毕铁路斑竹林隧道、沿江高速火山隧道、木寨岭公路隧道等工程，采用多元线性回归法结合最小二乘法寻优准则，分析了隧址区仅有单个钻孔反演精度较高的原因，提出了对具有多个钻孔的隧址区分段并分别进行单钻孔回归反演的新方法。在此基础上，重点讨论了木寨岭公路隧道断层破碎带区域地应力分布特征。结果表明：分段单孔反演较多孔反演进一步提高了反演精度；地应力的分布在断层前后呈现出先急剧增大后急剧减小的特征；除自重应力与埋深存在一定关联外，两项水平主应力随断层间距或厚度的增大突变性加剧；断层之间间距、断层倾角、断层厚度均是影响地应力方向偏转大小的重要因素，断层之间间距或断层倾角越小、断层越厚，地应力方向偏转越显著。     

半约束模型试验--一种验证随浪和斜浪中波浪力计算的手段

本文采用半约束模型试验技术，对一条高速船在规则波中随浪和斜浪工况进行了流体动力系列试验，以探讨航运的安全性，验证作用于船体上波浪力的估算方法。对每次试验，以波动方程的形式采用数值估算方法确定环绕船模的波浪运动的时间历程。并用同样的方法从测量数据中提取垂荡和纵摇与模型测量运动，一阶波导纵荡、横荡作用力和首摇力矩。因此合理比较理论计算的波浪力与力矩的时间历程成为可能。这表明SSPA海事动力学的研究所(MDL)模型试验设施可以提供高质量的测量，与所述计算方法结合起来可用来验证理论计算和建立半经验方法。     

我国电力机车及动力车通风系统

简要地说明了我国电力机车及动力车通风系统的发展情况，尤其是交流传动技术对我国电力机车及动力车通风系统的发展的重要影响，同时，还详细分析了各种通风方式的特点，为电力机车及动力车通风系统简统化设计提供了多种选择模式。     

电力机车车轴热处理工艺的研究

分析了EA4T钢的性质特征以及传统调质处理工艺所存在的问题,系统地研究了正火、淬火及回火工艺对材料的组织及性能的影响规律。通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。     

烟大铁路轮渡渡船电力推进系统仿真分析

随着计算机仿真技术在工程研究领域的广泛应用,船舶电力系统数字仿真已成为高效的船舶电力系统分析手段.烟大火车渡船采用了当今国际先进的电力推进系统,通过对该系统进行了数字仿真分析,验证了该船电网运行的稳定性和可靠性.