城市公交线网差异化计程票价多目标优化

为获取更加接近实际城市公交线网的票价策略，将出行者的社会互动行为与后悔心理引入广义费用，提出线路客流OD矩阵均衡算法；分别以交通管理部门利润最大化及出行者效用最大化为目标，以公交计程票价、发车频率、私家车停车费为变量，建立固定需求下公交线网差异化计程票价多目标优化模型.引入集群智能多目标优化算法求解，并应用于Mandl 标准公交线网.研究发现：以线路里程为标准，差异化计程票制可以有效降低出行成本；依据帕累托最优解调节票价，可以促进出行者选择行为向优势均衡转移.     

铁路局集团有限公司技术规章管理平台设计方案研究

为科学、安全、有效地管理铁路生产的各技术环节,国铁集团、集团公司与各站段出台了涉及行车组织、客运组织、货运组织和铁路技术设备的运用、管理、维修等方面的技术规章,它是铁路运营和维护安全生产的基本保障。技术规章管理系统作为技术规章管理的信息化平台,是技术规章高效管理和高效运用的关键,是铁路基础管理工作的重要组成部分。本文在研究国内外情况和其他行业规章、文件管理系统后,依据集团公司实际工作需要,对集团公司技术规章管理平台方案进行研究,提出了一个更加方便、快捷、功能齐全且整体上相互协调的技术规章管理系统功能模块方案,作为指导集团公司技术规章系统建设的理论支撑。     

A coupled numerical approach to simulate the effect of earthquake frequency content on seismic behavior of submarine tunnel

Roughly 90% of all natural vibrations have epicenters in offshore zones and may cause destruction of submarine and floating structures. Such excitations can influence the safe performance of facilities set up on the seabed, like tunnels, jacket legs and subsea oil pipelines. Some researches on this theme have been carried out to demonstrate the importance of seaquake analyses and their effects have been underlined. The present study intends to numerically simulate a two-dimensional fluid-structure interaction (FSI) problem in order to examine the dynamic response of submarine tunnel under real horizontal earthquakes. Pressure is considered as independent nodal variables to represent the fluid flow effects and the induced time-dependent acceleration in porous medium equation is incorporated in the analysis and the tunnel shell is considered as flexible. This work highlights the importance of the input ground motion frequency content that governs the development of the induced seismic stress/strain around the lining of the tunnel. The results demonstrate that for deep sea the increment rate of the circumferential stress caused by surface gravity waves is below 7% when compared to the no-wave interface condition. Moreover, it is confirmed that long-period record may amplify the overall response of the system (up to 60%) specially the lateral and vertical displacements, as well as the principal stress to a lesser extent. The developed numerical model can attend to further analysis of tunnels embedded in a half-space in conjunction with fluid undergoing the severe long-period earthquakes.     

粘弹性人工边界在地下结构抗震分析中的应用

地下结构地震反应分析需考虑结构-地基的动力相互作用,其中场地土层的自由场反应分析是确定地震输入的关键问题。以往地下工程实例表明,在结构动力时程计算中,能否有效模拟无限地基边界对结构抗震分析有很大的影响。基于某地下综合体项目进行抗震评估,采用黏弹性人工边界模拟自由场震动响应,克服工程中传统分析里不能模拟场地无限域的缺点。为地下结构的动力时程分析提供可靠数值依据。     

重载铁路四线高墩连续梁桥的设计

神瓦(神木—瓦塘)铁路冯家川车站大桥为重载铁路四线桥,主桥采用4线(65+100+65)m连续梁,最大墩高85 m.桥上线间距大,上下部结构横向尺寸较大,利用有限元分析软件BSAS,MIDAS/FEA对结构受力进行了计算分析.结果表明:在主梁梁高相同的情况下,采用单箱三室截面能更好地减小主应力,采用单箱双室截面增加腹板厚度对主应力的改善有限;多线桥桥墩横向尺寸较大,空心截面设置纵肋板能很好地提高高墩的局部稳定性;主梁及桥墩各项计算指标均满足规范要求.     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

福州东(樟林)车辆段工艺设计实践与创新

随着铁路建设的发展,福建省境内货车保有量大幅度增长,货车检修任务量增加迅速。樟林编组站位于福州枢纽,具备良好的扣车条件,在此新建1处货车车辆段将解决整个福建省货车的定期检修工作,而且能保障列车的运行安全,节约运输成本以及货车周转时间。福州东车辆段出入段线下穿既有温福铁路,有利于行车组织、运营安全。总图因地制宜全创新提出存车线(预检预修)与修车库贯通布置方案。充分梳理预检预修与架落车工艺,提出独立设置预检预修设施。论述抛丸除锈设备独立设置、转向架单臂悬挂检修流水线等修车库与联合车库创新设计,福州东(樟林)车辆段设计实现了创新理念和工程实际的协调统一。     

A new solution for two-bag air suspension system with leaf spring for heavy-duty vehicle

The design problem of a two-bag air suspension system for heavy-duty vehicles is formulated as a two-level (suspension system level and component level) optimization problem. At the suspension system level, optimal stiffness matrix of leaf spring, characteristics of damper and upper rod layout are determined by solving a multi-objective constrained optimization problem with response surface. At the component level, shape and thickness of the leaf spring are formed using cubic-spline curves to make the stiffness matrix as close to the target values cascaded from suspension system level as possible. Simulations using a vehicle model described by multi-body model and FEM of the novel leaf spring validate the suspension system thus derived.     

旧水泥混凝土路面加铺沥青混凝土面层勘测设计

旧水泥混凝土路面加铺沥青混凝土面层，当没有路线设计资料时，需对旧有路线进行拟合，重新进行勘测设计，以获得与旧有路线一致的路线设计资料，为旧水泥混凝土路面加铺沥青混凝土面层提供设计依据。结合工程实践，介绍了拟合旧有路线时勘测设计的内容和方法。     

柴油机曲轴的三维形状优化

采用序列线性规划算法对16V240ZJ柴油机锻钢曲轴圆角进行了形状优化设计。优化的目标函数是最大应力最小,设计变量是圆角附近设计单元控制节点的坐标。优化结果完全满足曲轴设计与制造工艺的要求。