半潜式支持平台靠泊海洋生产平台碰撞概率建模

为有效解决深水半潜式支持平台靠泊海洋生产平台过程中存在的碰撞问题,从碰撞事故发生原因入手,借鉴挪威船级社(Det Norske Veritas,DNV)DNV-RP-107规范中的船与海洋平台碰撞概率模型和美国公路与运输协会(American Association of State Highway and Transportation Officials,AASHTO)《美国公路桥梁防船撞设计指南》中的船桥碰撞概率模型,将支持平台发生向前的过分偏移引起的碰撞场景分为漂移碰撞和动力碰撞2种,建立事件树,得到支持平台靠泊海洋生产平台碰撞概率模型。在此基础上,估算支持平台靠泊碰撞海洋生产平台的概率,由此评估碰撞风险,为半潜式支持平台靠泊碰撞海洋生产平台场景下的相关规范制定提供参考。     

故障树分析（FTA）技术在机车安全性评估中的应用

阐述FTA分析程序以及定性和定量的分析方法及目的;以某蓄电池电力机车为例,选择触电危险作为顶事件,说明触电故障树的构建过程。通过定性与定量分析,得出导致触电安全事故发生的最小割集和概率,由此评估机车的运用安全性;指出了FTA技术在机车安全性评估中的重要作用及其分析过程中需注意的问题。     

Large-scale dynamic transportation network simulation: A space-time-event parallel computing approach

This paper describes a computationally efficient parallel-computing framework for mesoscopic transportation simulation on large-scale networks. By introducing an overall data structure for mesoscopic dynamic transportation simulation, we discuss a set of implementation issues for enabling flexible parallel computing on a multi-core shared memory architecture. First, we embed an event-based simulation logic to implement a simplified kinematic wave model and reduce simulation overhead. Second, we present a space-time-event computing framework to decompose simulation steps to reduce communication overhead in parallel execution and an OpenMP-based space-time-processor implementation method that is used to automate task partition tasks. According to the spatial and temporal attributes, various types of simulation events are mapped to independent logical processes that can concurrently execute their procedures while maintaining good load balance. We propose a synchronous space-parallel simulation strategy to dynamically assign the logical processes to different threads. The proposed method is then applied to simulate large-scale, real-world networks to examine the computational efficiency under different numbers of CPU threads. Numerical experiments demonstrate that the implemented parallel computing algorithm can significantly improve the computational efficiency and it can reach up to a speedup of 10 on a workstation with 32 computing threads.     

导管式推进器非定常性能数值计算方法研究

基于滑移网格方法，采用SST k-ω湍流模型研究不同网格划分方式对带前置定子导管式推进器非定常性能的研究。首先基于相对参考坐标系法及滑移网格方法分别对推进器在定常与非定常下的性能进行数值预报，并与试验结果相比验证计算方法的可靠性。基于该方法研究整体网格划分方式与周期性网格对推力系数、扭矩系数与推进器各个方向上的非定常脉动力的影响。研究结果为进一步研究推进器非定常性能提供了参考。     

Integrating capacity analysis with high-speed railway timetabling: A minimum cycle time calculation model with flexible overtaking constraints and intelligent enumeration

Compared with most optimization methods for capacity evaluation, integrating capacity analysis with timetabling can reveal the types of train line plans and operating rules that have a positive influence on improving capacity utilization as well as yielding more accurate analyses. For most capacity analyses and cyclic timetabling methods, the cycle time is a constant (e.g., one or two hours). In this paper, we propose a minimum cycle time calculation (MCTC) model based on the periodic event scheduling problem (PESP) for a given train line plan, which is promising for macroscopic train timetabling and capacity analysis. In accordance with train operating rules, a non-collision constraint and a series of flexible overtaking constraints (FOCs) are constructed based on variations of the original binary variables in the PESP. Because of the complexity of the PESP, an iterative approximation (IA) method for integration with the CPLEX solver is proposed. Finally, two hypothetical cases are considered to analyze railway capacity, and several influencing factors are studied, including train regularity, train speed, line plan specifications (train stops), overtaking and train heterogeneity. The MCTC model and IA method are used to test a real-world case involving the timetable of the Beijing–Shanghai high-speed railway in China.     

基于GOOSE机制的城市轨道交通中压环网继电保护方案优化

针对目前城市轨道交通中压环网继电保护存在的问题,提出了基于GOOSE(面向通用对象的变电站事件)机制的中压环网的继电保护优化方案,有效地解决了传统过流保护级差配合困难的问题.该方案是以GOOSE光纤以太网为基础,以闭锁逻辑为核心的数字通信电流保护方案.将GOOSE信号进行分类,并对中压供电环网系统各种可能出现的故障进行动作行为分析.最后,通过RTDS(动态数字仿真系统)仿真试验,证明该方案在各种故障情况下,都能保证继电保护的选择性、速动性、灵敏性和可靠性.     

某航道桥下部结构受船舶撞击后安全性能评估及修复

为评估航道桥下部结构的船撞安全性,以遭受船撞的某内河航道桥为研究对象,采用有限元方法和相关规范计算受撞击的5号桥墩自身水平抗力、船撞力、墩顶位移,并从墩顶位移和桥墩抗力两方面对受撞桥墩的安全性进行评估。结果表明:5号桥墩的横桥向和顺桥向抗力均由桩基强度控制,分别为2528 kN和1142 kN;事故船撞击工况下,墩顶最大横桥向和顺桥向位移分别为7.6 mm、13.4 mm,满足位移限值要求;沿横桥向和顺桥向的船撞安全系数分别为1.67和0.94,顺桥向的自身抗力不足以抵抗瞬时船撞力,导致桥墩桩基础受损,建议采用增大截面法对受损桩基础进行加固补强,并设置独立防撞墩以保障桥梁结构安全。基于分析过程,总结了桥梁下部结构船撞安全评估的一般流程。     

贮存系统的联合维修策略

为了保证贮存系统的可用性,需要对其故障与否进行检测,针对该问题提出了包含定期检查和预先更换的维修策略。为了协调部件更换和备件供应,联合考虑了连续检查的（0,1）订货策略,所以联合维修策略包括维修策略和备件供应策略。基于联合策略建立了一个规划模型,在满足可用度约束条件下最小化平均总费用。基于更新过程,推导了贮存系统服从一般寿命分布的性能指标。以威布尔寿命分布为例,结果表明联合策略比独立策略更有效。     

泥泵水力性能动态特征的数值模拟分析

在使用滑移网格模拟分析新设计的HDP-263-50-130-4型泥泵时,发现叶轮处于不同位置时,同一转速和流量下,泥泵的扬程、扭矩、效率均呈周期性的波动,该波动近似于正弦函数,各量波动幅度较大,波动周期等于叶轮转过两相邻叶片的夹角所需的时间 对于该型号泵,扬程的波动要领先力矩约0.21个波动周期,效率的波动领先力矩约0.34个波动周期;当叶轮的一个叶片转过蜗壳的第Ⅰ断面,且与此断面呈16.左右夹角时,泥泵达到最高效率,约为92％;当叶轮的一个叶片转向蜗壳的第Ⅰ断面且与其夹角约为29°时,泥泵效率最低,约为77％.经分析认为,泥泵水力性能波动的主因是运动叶轮与静止蜗壳之间的动静干扰,该干扰主要体现在叶轮相对涡舌的位置的变化引起涡舌周围流态的变化.     

高职院校群体性事件成因及应对机制研究

高职学生群体性事件是学生释放压力与发泄不满的非理性方式,这种不理性行为会造成学校混乱,负面影响很大。因此,掌握高职院校学生特点,分析群体性事件的内外部原因,并在此基础上提出有效的应对机制,能够维护校园的和谐与稳定。