考虑围岩蠕变特性的TBM隧道管片衬砌受力特性研究

为研究深部高地应力岩层中修建TBM隧道时管片衬砌结构的力学行为,以某深埋TBM工法隧道为研究对象,建立基于围岩蠕变和管片分块效应的衬砌-围岩复合模型,研究考虑时间效应下管片衬砌的受力特性。结果表明:考虑围岩蠕变效应下管片衬砌受力表现出明显的时间效应。随着围岩蠕变时间的延长,管片衬砌的形变、内力和接缝张开量均呈现两阶段增长,具体表现为前期呈线性增长,后期增加趋缓。洞周围岩应力经历三阶段变化,即先减小后增大直至稳定。围岩蠕变时间为100年时,管片衬砌的内力和形变量均接近极限值。研究结果可为深部高地应力且考虑围岩蠕变效应下的TBM隧道衬砌结构设计提供参考。     

船舶除锈机器人驱动系统设计

介绍了应用在船舶除锈的磁吸附爬壁机器人本体驱动系统的设计,着重阐述了系统的驱动原理和驱动电路。系统以89c51单片机为核心,通过键盘以及通信接口可以方便的控制步进电机带动机器人本体运动,充分发挥了单片机的优势。实验表明,系统电路设计合理,简单实用。     

气象信息在船舶管理中的应用

从船舶航行安全、可靠性角度考虑，一个重要的影响因素是航行船舶所在海域的气象状况，因此气象信息对于船舶调度管理起到非常积极重要的作用。如何获取气象信息，并把获取的气象信息融合到电子海图显示平台中，对于航行船舶的监控和管理显得十分有意义。针对如何获取气象信息及如何与电子海图叠加显示两方面的内容进行了论述。     

填石路堤的摊铺工艺研究

填石路堤的施工工艺是路堤工程质量控制的一个重要方面,施工工艺控制的好坏直接影响着施工质量。其中,摊铺工艺尤为重要。     

70 m跨二铰型上承式桁架混凝土拱桥的施工技术

介绍70 m双铰型上承式桁架拱桥的施工和在施工阶段监测监控的内容及方法,可供类似工程建设参考。     

PLC在永磁机构控制器中的应用

介绍了利用西门子S7-200系列可编程序控制器(PLC)实现的真空断路器机械寿命试验自动控制,该设备功能完善,操作简便,可靠性好.     

Young drivers and graduated licensing: The Ontario case

Despite improvements in road safety over the past several decades, accident rates remain high for young drivers. One accident countermeasure that is expected to improve the safety record of this group is graduated licensing. The philosophy behind this licensing system is that novice drivers, of whom the majority are young, should be restricted to relatively safe driving environments during the initial learning period. Graduated licensing was implemented in the Province of Ontario, Canada in 1994. The objective of this study is to estimate the potential benefits and costs for young drivers associated with two components of the Ontario graduated licensing package: the late-night driving curfew and the high-speed roadway restrictions. Based on accident and travel data for the year 1988, accident-involvement rates per kilometre driven were calculated for different driver groups for various combinations of time of day and roadway speed limit. These rates were then applied to the expected mobility profiles of young drivers affected by graduated licensing. The results of the study support the late-night curfew and suggest that this component of the licensing package should reduce total accident involvements for the affected group by up to 10 percent and fatal accident involvements by up to 24 percent, while reducing their total driving by only four percent. By contrast, the empirical evidence suggest that the high-speed roadway restrictions are likely to increase accident involvements, and thus it is strongly recommended that this component of Ontario's graduated licensing package be changed.     

遥控水下液压绞车的研制

深水救生潜器对接系统液压绞车是载人潜器上不可缺少的救生设备之一。其机械系统要求体积小，重量轻，且具有低转速、大扭矩的工作特性；控制系统要求收放绳能自动检测、显示，极限绳长时能自动控停、报警，且有掉电保护等功能。本文主要从机械系统和控制系统两个方面介绍该液压绞车的基本原理、结构、误差处理方法及试验情况。     

洋山深水港区一期工程航行安全模拟试验研究

运用电子操纵模拟器 ,预演了第六代集装箱船在各种不利航行条件下进出洋山深水港区的航行过程 ,分析了风、浪、流等环境因素对船舶操纵的影响 ,确定了船舶安全进出港所需的航道宽度、船舶安全靠泊条件和掉头操纵水域尺度。大量的模拟试验研究结果证实 :洋山深水港区具有良好的船舶航行条件 ,船舶按一期工程小洋山方案 (一 )、小洋山方案 (二 )以及小洋山～镬盖塘方案进行靠离泊和掉头操纵无本质差异 ,主要不同点在于船舶通过窄口后小洋山方案 (一 )和小洋山方案 (二 )比小洋山～镬盖塘方案有较长的制动水域