通孔玻璃材料的研制

研究了利用废旧玻璃用松装烧结和模压烧结方法生产通孔材料的可能性，以及原始粉末尺寸、烧结工艺和造孔剂添加量对通孔材料的密度和孔隙度的影响。实验结果表明，用废旧玻璃经松装烧结或模压烧结后可制得通孔材料；松装烧结时，随烧结温度提高，烧结保温时间延长，原始粉末粒度变细，烧结后通孔材料的密度增大，而孔隙度降低；模压烧结时造孔剂的最佳百分含量为５％～５０％，且通孔材料随造孔剂的百分含量增加，密度降低，孔隙度增大。     

杭州城市交通拥挤现状及对策

在分析杭州市交通供需现状的基础上,提出了规划多中心结构和混合功能区,以减少不必要的出行以及合理配置交通源,并对改善中心区交通提出切实可行的对策。     

一种改进的基于密度和网格的高维聚类算法

提出了一种改进的基于密度和网格的高维聚类算法,并对算法有效性进行了验证.该算法通过减少样本点数量的方法达到减少稠密子空间数量.在发现高维稠密子空间时,对样本库进行精简.这些样本点的求得能有效减少求解最小聚类的时间复杂度.     

沥青混合料最大理论密度的计算

通过对矿质集料的物理状态及其在混合料中存在方式进行分析,探讨了沥青混合料最大理论密度计算中矿料密度的引用及其影响.     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

高速公路常发性交通拥挤路段实时判定与跟踪研究

提出的自动判定和实时跟踪高速公路常发性拥挤路段的方法包含3个算法：①路段平均车速算法；②交通流区段类型判定算法；③排队类型判定算法。考虑采用两个前后相邻车辆检测站之间的路段平均车速来实时判定和跟踪常发性交通拥挤路段的情况，使得模型所提供的信息更能反映路段的真实交通状况。采用路段平均车速的方法克服了目前采用点速度来跟踪车队方法的局限性，并且采用“客观”标定临界车速作为基于现场数据判定车队状态的一种方法。     

沥青路面破损程度分级与破损换算系数取值的探讨

本文分析现行规范中对沥青路面破损程度、密度分级以及破损换算系数取值中存在问题,通过分析沥青路面破损程度与路面使用状况关系,结合沥青路面养护措施,提出沥青路面裂缝破损密度分级的方法,并对车辙破损严重程度分级标准、裂缝和车辙破损换算系数的修正值提出建议。     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

A new model for temporal–spatial stochastic analysis of vehicle–track coupled systems

The vehicle–track coupled system has a random nature in the time–space domain. This paper proposes a computational model to analyse the temporal–spatial stochastic vibrations of vehicle–track systems, where the vehicle–track system is divided into a vehicle subsystem, track subsystem, and interfacial subsystem between the wheel and rail. In this model, the time-varying randomicity of dynamical parameters of the vehicle system, correlation, and randomness of the track structural parameters in the time–space joint dimensions, and randomness of the track random irregularities are considered. A probability dimension-reduction method was used to randomly combine different random variables. Furthermore, the probability density evolution method was applied to solve the delivery problem of probabilities between excitation inputs and response outputs. The temporal–spatial stochastic vibrations of the vehicle–track system with different coefficients of variation were studied, in which we assumed that the dynamic parameters obeyed the normal distribution, and the stochastic simulation method of the track random irregularities is probed into. The calculated results from this model are consistent with the actual measured results and physical conceptions. Thus, the temporal–spatial stochastic evolutionary mechanism can be explored, and the limits of dynamic indices can be formulated by using this developed model.     

关于公交停靠站影响区范围的研究

随着城市公共交通系统的发展,公交停靠站对道路交通流的影响已逐渐引起人们的注意。分析公交停靠站的影响首先应该对停靠站的影响区范围进行界定。在分析前人研究成果的基础上,基于交通波理论,按考虑超车与否,分析公交停靠站的影响区范围长度,得到不同交通流密度条件下公交停靠站影响区长度的计算公式。